-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Altium Focuses on the Designer First
May 22, 2017 | Judy Warner, AltiumEstimated reading time: 1 minute
A few months before I joined Altium, while I was still with I-Connect007, I sat down with Lawrence Romine to discuss the company’s drive to satisfy the individual PCB designer, and not necessarily the OEMs who employ them. Romine also explains what sets designers and engineers apart from the average person, and why some Altium users have a different primary EDA tool, but use Altium when they need a design done fast.
Judy Warner: Lawrence, before we get started, why don't you tell us a little bit about your background.
Lawrence Romine: My background is about 16 years in professional business. My father was an engineer. Grew up working in the garage with my father starting at an early age. We restored British sports cars—MG, Triumph, Jaguar, and motorcycles. It's still what I do for fun.
I have a lifelong passion with aviation. Joined the Navy out of high school and got into avionics and was here at Miramar in the F-14 business, which was very exciting. I finished school and became a design engineer in the audio industry. This was for the audiophile business, which is really much more art than science. I did that for just a handful of years, but then got into the semiconductor business.
I got a job in the semiconductor business and I was selling mostly Xilinx components with a now-purchased distributor called Insight. I did that for four or five years and then moved over to software. I did that for the same reason you made some adjustments in your career. It really became difficult to track business into China and I was looking for an opportunity to get into something that offered a little more instant gratification.
When I engage with a customer at a block diagram level, we’re going to talk about their system and just roughly what technologies they are going to have on this design. Back then they would give you a completion date, a time-to-market date, and it was typically 18 months to two years, and I always added at least six to nine months in my forecasting. I'm sure you have had a similar experience.
To read this entire article, which appeared in the April 2017 issue of The PCB Design Magazine, click here.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/03/2024 | Nolan Johnson, I-Connect007This week’s most important news is strategic—and telling. When one puts together the IPC industry reports, we simply have to include the recent conversation with Shawn DuBravac and Tom Kastner. On the design side, check out the latest “On The Line With…” podcast featuring Brad Griffin from Cadence Design Systems, discussing SI and PI in the realm of intelligent system design.
Synopsys, Samsung Electronics Collaborate to Achieve First Production Tapeout of Flagship Mobile CPU
05/03/2024 | PRNewswireSynopsys, Inc. announced that Samsung Electronics has achieved successful production tapeout for its high-performance mobile SoC design, including flagship CPUs and GPUs, with 300MHz higher performance using Synopsys.ai™ full stack AI-driven EDA suite and a broad portfolio of Synopsys IP on Samsung Foundry's latest Gate-All-Around (GAA) process technologies.
Altair Acquires Research in Flight, Forging a New Path for Aerodynamic Analysis
05/03/2024 | AltairAltair a global leader in computational intelligence, announced it has acquired Research in Flight, maker of FlightStream®, which provides computational fluid dynamics (CFD) software with a large footprint in the aerospace and defense sector and a growing presence in marine, energy, turbomachinery, and automotive applications.
Real Time with… IPC APEX EXPO 2024: Software Solutions for Circuit Board Challenges
05/03/2024 | Real Time with...IPC APEX EXPONolan Johnson speaks with Will Webb from Aster Technologies about their software solutions for design teams, manufacturing, test engineers, and process engineers. Aster's software addresses the increasing complexities of circuit boards and the need for alternative testing methods.
Real Time with… IPC APEX EXPO 2024: My Role as a Technology Solutions Director
05/02/2024 | Real Time with...IPC APEX EXPOPeter Tranitz, senior director of technology solutions at IPC, shares insights into his role as the design initiative lead. He details his advocacy work, industry support, and the responsibilities of the design initiative committee. The conversation also covers the revamping of standards, the IPC Design Competition, and the implementation of design rules in software tools.