-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Hole Truth: Via Integrity in an HDI World
From the drilled hole to registration across multiple sequential lamination cycles, to the quality of your copper plating, via reliability in an HDI world is becoming an ever-greater challenge. This month we look at “The Hole Truth,” from creating the “perfect” via to how you can assure via quality and reliability, the first time, every time.
In Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
- Articles
- Columns
- Links
- Media kit
||| MENU - pcb007 Magazine
Walt Custer’s Market Report
June 12, 2017 | Barry Matties, I-Connect007Estimated reading time: 8 minutes

At the recent EIPC Conference, Walt Custer delivered his annual report detailing the trends he’s been seeing in the electronics industry for 2016 and into the first quarter of 2017. Barry Matties sat down with Walt to discuss his findings, including his forecast for the upcoming year. Also discussed are Walt’s prognosis for the market segments with the most promise and those that cause him concern.
Barry Matties: Walt, you’ve just wrapped up your report. Please give our readers an overview.
Walt Custer: The year 2016 finished up quite well, and the first quarter of 2017 was strong worldwide. Almost all the sectors were up and almost all the geographies were up. The leading indicators were positive. Europe did especially well. Worldwide, I think electronic equipment sales were up about 2.8%. Now, it doesn’t sound like a lot, but it’s been four successive quarters of growth when we had contraction for a while, and Europe was up about 5% the first quarter and all its sectors grew.
Now, we are seeing some signs of slowing, or at least slower growth, but not contraction worldwide. Looking at the leading indicators out of Asia China contracted again. It dropped down below 50 for PMI. Korea has been contracting, Taiwan is still up, and Japan still up, so I think we’ve had some good times, but the rate of growth has peaked in parts of Asia.
Matties: Is that what you expected in China?
Custer: Well, I think they’re having their problems, you know, financial problems and the like so, no, I wasn’t expecting it. I don’t think the people who released the data were expecting it, but the data is what the data is and we’ll watch it. All I’m saying is I’m a little cautionary that we have had some decent growth, which felt really good, but now we’re also seeing slowing.
By end-market, semiconductor fab equipment is doing incredibly well, but that’s true of capital equipment in general during the upturns in a business cycle. In good times capital spending grows like gangbusters and in bad times it contracts. The automotive industry is up, medical electronics is up, and the instrument control sector is doing better. Even cellphone sales picked up, so there were a lot of sectors that had a good first-quarter growth.
My biggest concern is the global economy, which is fragile because of political situations. North Korea could quickly get out of hand and the Middle East is always a worry, so things could turn very quickly if some crazy person decides to push a button.
Matties: There are a lot of crazy people in the world right now.
Custer: Yeah, there are a lot of crazy people in the world. But I would say it was a very encouraging first quarter. Semiconductor sales are through the roof, but I think that will be unsustained because they are substantially outgrowing electronic equipment.
In 1Q17 electronic equipment sales grew 2.8% while semiconductors grew 18%. Sure, there’s increased semiconductor content, but not enough to make up for that first quarter growth difference. That implies that people are over-ordering and/or building chip inventories. Once people realize they have enough stock, then they will all of a sudden turn off the spigot.
In the first quarter, semiconductor capital equipment was up over 40% and that’s a bubble—mirroring semiconductors being up by 18%.
Matties: PCBs were down for a bit, weren’t they?
Custer: Well, PCBs are just not growing as fast as the other sectors. I think in the first quarter I calculated PCBs were up about 1.2% or 1.5%, but that’s compared to semiconductors, which are up 18%. People aren’t stockpiling PCBs, and the good news is that PCBs won’t crash dramatically in a slowdown, but then the bad news is that PCBs are just not growing as much as the other electronic sectors. Whether some of the slower growth is price-related or demand-related, I don't know, but PCB sales are not growing that much. We recently saw a growth in laminate, but I think some of that was panic-buying because of worries with copper foil and glass shortages.
Page 1 of 2
Suggested Items
Trouble in Your Tank: Can You Drill the Perfect Hole?
07/07/2025 | Michael Carano -- Column: Trouble in Your TankIn the movie “Friday Night Lights,” the head football coach (played by Billy Bob Thornton) addresses his high school football team on a hot day in August in West Texas. He asks his players one question: “Can you be perfect?” That is an interesting question, in football and the printed circuit board fabrication world, where being perfect is somewhat elusive. When it comes to mechanical drilling and via formation, can you drill the perfect hole time after time?
The Evolution of Picosecond Laser Drilling
06/19/2025 | Marcy LaRont, PCB007 MagazineIs it hard to imagine a single laser pulse reduced not only from nanoseconds to picoseconds in its pulse duration, but even to femtoseconds? Well, buckle up because it seems we are there. In this interview, Dr. Stefan Rung, technical director of laser machines at Schmoll Maschinen GmbH, traces the technology trajectory of the laser drill from the CO2 laser to cutting-edge picosecond and hybrid laser drilling systems, highlighting the benefits and limitations of each method, and demonstrating how laser innovations are shaping the future of PCB fabrication.
Day 2: More Cutting-edge Insights at the EIPC Summer Conference
06/18/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) summer conference took place this year in Edinburgh, Scotland, June 3-4. This is the third of three articles on the conference. The other two cover Day 1’s sessions and the opening keynote speech. Below is a recap of the second day’s sessions.
Day 1: Cutting Edge Insights at the EIPC Summer Conference
06/17/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) Summer Conference took place this year in Edinburgh, Scotland, June 3-4. This is the second of three articles on the conference. The other two cover the keynote speeches and Day 2 of the technical conference. Below is a recap of the first day’s sessions.
Preventing Surface Prep Defects and Ensuring Reliability
06/10/2025 | Marcy LaRont, PCB007 MagazineIn printed circuit board (PCB) fabrication, surface preparation is a critical process that ensures strong adhesion, reliable plating, and long-term product performance. Without proper surface treatment, manufacturers may encounter defects such as delamination, poor solder mask adhesion, and plating failures. This article examines key surface preparation techniques, common defects resulting from improper processes, and real-world case studies that illustrate best practices.