Engineers Produce Long Lasting, Energy Density Battery
August 3, 2017 | The City College of New YorkEstimated reading time: 1 minute
A new generation of manganese dioxide-zinc batteries with unprecedented cycle life and energy density is the latest innovation at The City College of New York-based CUNY Energy Institute. The discovery has made the common household battery suitable for large grid storage applications.
City College Senior Research Associate Gautam G. Yadav and his team applied a new twist to the old chemistry behind batteries. The result is a battery that takes advantage of intercalation and complexation chemistry to make the cathodes rechargeable to a larger extent, greatly extending its life.
“A new layered crystal structure of manganese dioxide is used in this chemistry, which is intercalated with copper ions. This makes it rechargeable to its theoretical capacity for a significant number of cycles,” said Yadav.
According to Yadav, this is the first time a novel calcium hydroxide interlayer is used to block the poisonous zinc ions through complexation. This in turn allows the battery to maintain its high energy density over 900 cycles.
A recent trend in the energy storage field has been to replace unsafe and expensive lithium-ion batteries with zinc-anode versions as zinc is cheap, abundant and much safer. Until now, the only detriment of this version has been the latter’s relatively short cycle life, which has not allowed it to be successfully commercialized as a rechargeable battery.
Team members included Xia Wei, Michael Nyce, Jinchao Huang, Joshua Gallaway, Damon Turney, Jeff Secor and Sanjoy Banerjee, Distinguished Professor and director of the CUNY Energy Institute.
About The City College of New York
Since 1847, The City College of New York has provided low-cost, high-quality education for New Yorkers in a wide variety of disciplines. Today more than 16,000 students pursue undergraduate and graduate degrees in eight professional schools and divisions, driven by significant funded research, creativity and scholarship. Now celebrating its 170th anniversary, CCNY is as diverse, dynamic and visionary as New York City itself.
Suggested Items
The Chemical Connection: Reducing Etch System Water Usage, Part 2
05/02/2024 | Don Ball -- Column: The Chemical ConnectionIn my last column, I reviewed some relatively simple ways to reduce water usage in existing etch systems: cutting down cooling coil water flow, adding chillers to replace plant water for cooling, lowering flow rate nozzles for rinses, etc. This month, I’ll continue with more ways to control water usage in your etcher. Most of these are not easily retrofittable to existing equipment but should be given serious consideration when new equipment is contemplated. With the right combination of add-ons, it is possible to bring the amount of water used in an etch system to almost zero.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.