Leti Develops Proof of Concept to Test Wireless Systems in Aircraft
September 21, 2017 | LetiEstimated reading time: 1 minute
In a joint research project with Dassault Aviation, Leti demonstrated a channel-measurement campaign over Wi-Fi frequency in several airplanes, including Dassault's Falcon business jet. Using a channel sounder and a spatial scanner, Leti teams determined a statistic model of the in-cabin radio channel, constructed from the antenna position and the configuration of the aircraft.
A radio-frequency channel emulator and the in-cabin channel model were used to test Wi-Fi designed for passenger communication and entertainment before installation in the aircraft. In that test, two different wireless access points and different antenna configurations for Wi-Fi networks deployed in an aircraft cabin were evaluated. Based on an extensive test campaign, mean values of performance parameters, together with the operating margin, were provided according to the device configuration, kind of traffic and channel conditions.
In addition, the technology gives aircraft designers key tools to define wireless communication systems that enhance passenger experience, without aircraft immobilization.
This research collaboration with Dassault is a critical first step toward validating wireless connectivity systems before they are installed in aircraft," said Lionel Rudant, Leti strategic marketing manager. "Wireless systems have multiple benefits, ranging from more efficient monitoring of aircraft comfort and safety to reducing the weight of planes."
Leti's roadmap also addresses goals for wireless sensor networks, which are part of an industry effort to replace the hundreds of miles of wiring required to connect thousands of sensors and other detectors located throughout aircraft to monitor safety and comfort factors. The factors range from ice detection, tire pressure and engine sensors to cabin pressure, smoke detection and temperature monitoring.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Understanding Objective Evidence in Manufacturing Processes
05/07/2024 | Real Time with...IPC APEX EXPOGraham Naisbitt explains the importance of objective evidence in manufacturing processes, debunking the common misconception that the ROSE test is a cleanliness test. He also discusses the introduction of Rev J, a requirement for measuring ionic contamination on circuit assemblies, and the challenges in accurately measuring contamination. Alternative methods like ion chromatography and the need for updating standards like the ROSE test are mentioned.
U.S. Air Force Secretary Kendall Flies in AI-Piloted X-62A VISTA
05/06/2024 | Lockheed MartinLockheed Martin Skunk Works joined the U.S. Air Force Test Pilot School and other government and industry partners in hosting U.S. Secretary of the Air Force Frank Kendall to fly in the X-62A Variable In-flight Simulation Test Aircraft (VISTA), a one-of-a-kind aircraft modified to test artificial intelligence (AI) and autonomy capabilities.
Real Time with… IPC APEX EXPO 2024: Software Solutions for Circuit Board Challenges
05/03/2024 | Real Time with...IPC APEX EXPONolan Johnson speaks with Will Webb from Aster Technologies about their software solutions for design teams, manufacturing, test engineers, and process engineers. Aster's software addresses the increasing complexities of circuit boards and the need for alternative testing methods.
Manta Ray UUV Prototype Completes In-Water Testing
05/02/2024 | DARPAThe Manta Ray prototype uncrewed underwater vehicle (UUV) built by performer Northrop Grumman completed full-scale, in-water testing off the coast of Southern California in February and March 2024.
Real Time with… IPC APEX EXPO 2024: Exploring Electronic Card Testing and AI Integration with SPEA
05/02/2024 | Real Time with...IPC APEX EXPOLuca Fanelli, President of SPEA, and Andrea Furnari, Vice President, give insight into the company and its business units. The challenges in testing electronic cards and the company's solutions are discussed. SPEA has a global reach and focus on the US market are emphasized. The use of AI in testing, particularly in optical inspection and test program execution, is examined.