-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Process Engineering & Defect Prevention
October 6, 2017 | Michael Carano, RBP Chemical TechnologyEstimated reading time: 1 minute
As of this writing, I have explored many topics related to specific defects that plague printed circuit board fabricators. A key underlying theme of these writings underscores the critical need of the skilled troubleshooter to get to the underlying cause or causes of the defects. Defects may “manifest” or be detected in or after a specific operation within the printed circuit board manufacturing process, but the underlying root cause may have occurred earlier (perhaps much earlier) in the process. As I have written in prior columns, I chose to present the anomaly or defect where it is most likely to be detected, then subsequently presented the most likely root causes wherever they might have been introduced. It should be noted that these examples are presented as likely starting places for the investigation of anomalies or defects presented, or the kinds of causes that might be investigated.
The troubleshooter’s task is complicated by the fact that there are many possible ways to combine or sequence the individual process steps available to achieve the desired end structure. As an example, a simple, single-lamination multilayer printed wiring board may involve 30 to 50 process steps, while a complex, multiple lamination (sequential lamination) printed wiring board, with pre- and post-machining and other mechanical operations, and selective plating processes, could involve several hundred process steps. In an ideal world, each step could be verified correct immediately during or after the process, but in practice the effect of many processes cannot be readily evaluated until the completion of many subsequent steps make latent errors visible. Much effort is and has been expended in attempts to improve this, with limited success. Thus, it remains a troublesome issue. The concern then is the defect may not manifest itself until several downstream process steps. One may refer to this as the latent defect. The impact of these latent defects is four-fold:
1. First, the detection and verification of the defect may require real time and the diversion of skilled resources—already in short supply in most lean-running modern operations.
2. Second, there is a schedule impact in today’s just-in-time operating mode, both of the process flow disruption inherent in the detection and in the verification of the defect.
To read the full version of this article which appeared in the October 2017 issue of The PCB Magazine, click here.
Suggested Items
Argonne, Toyota Collaborate on Cutting-Edge Battery Recycling Process
05/01/2024 | BUSINESS WIREThe U.S. Department of Energy’s (DOE) Argonne National Laboratory has recently launched a collaboration with Toyota Motor North America that could reduce the nation’s reliance on foreign sources of battery materials.
Real Time with… IPC APEX EXPO 2024: Outlining Rehm's Innovations and Global Presence
05/01/2024 | Real Time with...IPC APEX EXPOMichael Hanke, the chief sales officer for Rehm Thermal Systems, shares insights on the North American market, new machinery, and software development. He also discusses Rehm's turnkey solutions, process flexibility, global presence, and the dedicated team of 700 employees working on global solutions.
The Knowledge Base: A CM’s Perspective on Box Build Practices
04/30/2024 | Mike Konrad -- Column: The Knowledge BaseIn the ever-evolving landscape of electronics manufacturing, the box-build process stands out as a critical phase that bridges the gap between individual component manufacturing and the delivery of a fully functional electronic system. This intricate procedure, encompassing the assembly of everything from PCBs to wire harnesses and mechanical enclosures, demands a high level of precision, efficiency, and innovation. As the electronics assembly industry expands and diversifies, understanding the best practices within box-build assembly has become paramount for manufacturers aiming to stay ahead in a competitive market.
TSMC Certifies Ansys Multiphysics Platforms, Enabling Next-Gen AI and HPC Chips
04/30/2024 | PRNewswireAnsys announced the certification of its power integrity platforms for TSMC's N2 technology full production release. Both Ansys RedHawk-SC and Ansys Totem are certified for power integrity signoff on the N2 process, delivering significant speed and power advantages for high performance computing, mobile chips, and 3D-IC designs.
Koh Young Showcases Award-winning Inspection Solutions at SMTconnect with SmartRep in Hall 4A.225
04/25/2024 | Koh Young TechnologyKoh Young Technology, the industry leader in True 3D measurement-based inspection solutions, will showcase an array of award-winning inspection and measurement solutions at SMTconnect alongside its sales partner, SmartRep, in booth 4A.225 at NürnbergMesse from June 11-13, 2023. The following offers a glimpse into what Koh Young will present at the tradeshow: