Bending the Laws of Thermodynamics for Enhanced Material Design
October 23, 2017 | Department of Energy, Office of ScienceEstimated reading time: 1 minute
Whether it is better solar panels or smaller computer chips, new technologies demand improved semiconductors. Today’s standard approach to fabricating semiconductor alloys combines materials with similar crystal structures and often results in materials that are poorly mixed. That is, the materials are susceptible to composition fluctuations. Now, scientists have a new way to create well-mixed semiconductor alloys by combining materials with different crystal structures. The result? They bend the laws of thermodynamics to reduce or eliminate the driving force for such fluctuations. The new alloys can be stable over wide ranges of composition and may have desirable properties.
Using computational methods, scientists showed how to mix manganese oxide and zinc oxide to create an alloy with a “sweet spot” (right, blue diamond) where the elements are uniformly mixed (lower left). When synthesized at a higher temperature (right, red diamond), the same material lacks homogeneity (upper left).
The team’s work shows how to alloy materials with different crystal structures to create new semiconductors. Being able to homogeneously combine two materials opens up much wider “design spaces” for tailoring materials. With this technique, scientists can tailor material properties.
Structure and composition control the properties of materials. For semiconductors, the historically successful approach for such control has been the isostructural alloying of two “end point” phases with the same crystal structure. However, the ability to synthesize and tune these alloys can be constrained by solubility limits, spinodal decomposition or weak composition dependence of the properties. Researchers have now demonstrated a new approach for such control: the heterostructural alloying of two “end point” phases with different crystal structures. Through a combination of computational calculations and combinatorial thin-film phase-equilibria experiments, the researchers demonstrated that a prototypical alloy (Mn1-xZnxO) exhibits a dramatically widened window within which binodal decomposition is suppressed and spinodal decomposition is impossible. In this new class of alloys, not only is the metastable window for compositionally homogeneous single-phase alloys wider, but properties (e.g., electronic, optoelectronic, piezoelectric, ferroelectric) can change in a highly non-linear or even discontinuous fashion near the critical composition, providing two new routes to materials design.
Suggested Items
IDTechEx Discusses Low-Loss Materials: The Enabler of Future Connected Vehicles?
05/06/2024 | IDTechExFuture connected vehicles will offer future drivers a safer, smoother, and more convenient driving experience. Not only will drivers get access to more navigation and entertainment options, but they will also gain access to safety technologies that will potentially reduce accidents, improve congestion, and reduce emissions globally by allowing vehicle safety systems to communicate with each other and with city traffic infrastructure.
LQDX Divests Aluminum Soldering Business - Mina™ - to Taiyo America Inc.
05/02/2024 | PRNewswireLQDX, formerly known as Averatek Corp., developer of high-performance materials for advanced semiconductor manufacturing, today announced that it has divested its aluminum soldering business – known as MinaTM – to Taiyo America Inc., a global market leader in advanced electronic materials.
Indium Corporation Expert to Present on Pb-Free Solder for Die-Attach in Discrete Power Applications
04/30/2024 | Indium CorporationIndium Corporation Product Manager – Semiconductor Dean Payne will present at the Advanced Packaging for Power Electronics conference, hosted by IMAPS, held May 8-9 in Woburn, Massachusetts, USA.
Real Time with... IPC APEX EXPO 2024: Adhesive Materials and Equipment Update with Dymax
05/01/2024 | Real Time with...IPC APEX EXPOVirginia Hogan, global business development manager at Dymax, discusses adhesive materials, dispensing and curing equipment, a new, high-reliability conformal coating, and various materials and dispensing methods.
Real Time with... IPC APEX EXPO 2024: Sustainability in the Industry
04/26/2024 | Real Time with...IPC APEX EXPOGuest Editor Henry Crandall and Chris Nash of Indium Corporation discuss the company's 90th anniversary and its focus on sustainability. They focus on the benefits of sustainable materials, their compatibility, and value propositions. The conversation also highlights how Durafuse LT technology's role in reducing reflow temperatures is leading to significant cost and energy savings. Nash also touches on downstream sustainability efforts such as using recycled materials for packaging.