(Not) Breaking the Barrier to Foldable OLED Displays
November 16, 2017 | Holst CentreEstimated reading time: 2 minutes
With today's smartphones, tablets and laptops, there always seems to be a compromise: do you choose a bigger display for a better experience or a smaller, more portable device? But what if you could have both: displays the size of newspapers that fold up to fit in your pocket. Researchers from Holst Centre have solved a major challenge in creating such large-area displays for portable devices, demonstrating a new protective barrier for organic electronics that is foldable and allows high-temperature processing of display backplanes on top.
OLEDs are extremely sensitive to humidity, and the flexible substrates needed for foldable displays don't provide enough protection against moisture. So flexible displays need moisture-proof protective barrier layers above and below the sensitive OLED materials. However, the materials used in these barriers are quite brittle, limiting how much resulting displays can be bent and hampering the development of foldable displays.
Holst Centre's new optimized barrier makes foldable displays possible. It comprises an organic layer sandwiched between two layers of silicon nitride (SiN) – a standard barrier layer material. By optimizing the design of this stack, Holst Centre's scientists have been able to control its mechanical properties and create a much more flexible barrier that ensures the neutral stress line during bending is close to the active layers of the display to prevent mechanical and electrical degradation. The organic material also helps prevent moisture penetration through pinholes by ensuring very slow lateral spreading of water between the SiN layers.
Crucially, the particular organic material used is stable up to 400 °C and can be applied by slot-die coating. This allows the SiN layers to be deposited at 350 °C, improving their quality and ability to prevent water penetration. Moreover, it means the barrier can withstand the high temperatures used in display production processes, making it suitable for the bottom protective layers.
"Foldable displays are a hot topic right now, with many people claiming to demonstrate them. But the term is applied quite loosely, and very few – if any – of these demonstrators achieve the bending radii of 2 mm or less needed to be truly foldable. Our optimized multilayer barrier now makes foldable OLED displays possible. Not only does it enable very small bending radii, it is compatible with standard display production processes and provides excellent protection against water and stress for long-lasting displays," said Hylke Akkerman, Program Manager at Holst Centre.
OLED demonstrators using the new barrier have achieved 1000 hours with no blackspots in accelerated lifetime testing, even after ten thousand cycles of folding with a bending radius of 0.5 mm. This represents an operational lifetime of several years. With earlier versions of the barrier already deployed in its own Gen 1 pilot production line, Holst Centre is currently transferring this latest barrier to a production at a partner's facility.
Suggested Items
Sypris Receives New Releases Under Electronic Warfare Program
05/03/2024 | Sypris Electronics LLCSypris Electronics, LLC, a subsidiary of Sypris Solutions, Inc., announced that it has recently received additional releases under a multi-year production contract that was first announced in 2022. The order, which provides for Sypris to begin deliveries in 2024, calls for the manufacture and test of electronic assemblies for an additional four systems to be supplied to a U.S. DOD contractor.
Gstar Announced the Strategic Move: Groundbreaking of Silicon Wafer Factory Construction in Indonesia
05/03/2024 | PRNewswireRecently, Gstar held a groundbreaking ceremony for its silicon rod and silicon wafer factory, marking the beginning of the rapid construction phase.
GPV’s Q1 2024 Interim Financial Report Shows Strong Navigation in Uncertain Times
05/01/2024 | GPVDanish-based GPV recorded an expected drop in sales to DKK 2.3 billion for the first quarter of 2024. The decline also affected the operating profit, which was DKK 155 million compared to DKK 179 million in the same quarter last year, although the EBITDA margin was maintained. In general, demand has been softer in 2024, but GPV continues to invest for the long-term and expects the trend to turn in the second half of 2024.
Europlacer Presents New Range of iineo SMT Placement Machines.
05/01/2024 | EuroplacerFor more than 15 years, the Europlacer iineo placement machines have made their mark on the SMT industry with unique features and unrivalled flexibility. Today, Europlacer announces the launch of the second generation iineo.
RTX's Raytheon Awards Contract to Spain's Sener for Missile Production Support
04/30/2024 | RTXRaytheon, an RTX business, has awarded Spanish supplier, Sener, a contract to develop and produce the electro-mechanical control section of the Patriot® GEM-T missile.