Method for Enhancing Superconductivity by Laser Irradiation
November 22, 2017 | University of TokyoEstimated reading time: 3 minutes
A University of Tokyo research group has found that the superconductivity of materials in strongly correlated electron systems—that is, materials characterized by strong interactions between the electrons—can be enhanced beyond that achieved in thermal equilibrium by irradiation with a strong laser. The current findings hold promise of paving the way for research on regulating the superconductivity transition temperature with light, and applying the research toward developing new devices.
Realizing superconductivity at room temperature is one of the Holy Grails of condensed matter physics. Although the highest critical temperature for superconductivity at ambient pressure was recorded in copper oxide superconductors (cuprates) at around minus 140 degrees Celsius decades ago, the situation has essentially remained the same despite multiple efforts to raise the temperature to within room-temperature range. One reason for this is that the strong attraction between electrons required for realizing a higher transition temperature drives the tendency to pull and clump electrons together into a nearby location, thereby forming an uneven spatial distribution of electrons, which suppresses superconductivity. In order to break through this stalemate in equilibrium, researchers have increasingly been utilizing nonequilibrium processes, such as laser irradiation, in recent years as a new way for regulating the transition temperature, and controlling and enhancing superconductivity in materials.
The research group led by graduate student Kota Ido, Project Assistant Professor Takahiro Ohgoe, and Professor Masatoshi Imada at the Department of Applied Physics, Graduate School of Engineering, the University of Tokyo, performed computer simulations of electron dynamics in a standard model for strongly correlated electron systems (cuprates) by using a state-of-the-art numerical method, capable of dealing with electronic interaction effects accurately. As a result, the group found a way to realize a dynamic stable state with outstanding superconductivity not only by strong laser irradiation, which strengthens the effective repulsive interaction between electrons and thereby paradoxically enhances the emergent attraction, but also by circumventing the inhomogeneities in electron distribution, found in the equilibrium case, which strongly suppress superconductivity.
The current research outcome promises to pave the way for realizing superconductivity at room temperature for correlated electron materials. The research group plans to conduct further experiments to test its theory, obtained through these findings, that strong laser irradiation indeed enhances superconductivity. This study opens up further research for not only determining the suitability of different types of light for irradiation to control physical properties in materials based on theoretical guidelines obtained through computer simulations, but also its application to the development of new devices based on the research utilizing light.
"Most studies until now for high-temperature superconductivity were conducted primarily under equilibrium conditions," says Ido. He continues, "It was very hard to simulate the dynamics of superconductivity in strongly correlated electron systems like those in our present study, but we succeeded by developing a state-of–the-art method, which we used. We expect that our findings will stimulate further studies on nonequilibrium superconductivity in strongly correlated electron systems."
Suggested Items
The Chemical Connection: Reducing Etch System Water Usage, Part 2
05/02/2024 | Don Ball -- Column: The Chemical ConnectionIn my last column, I reviewed some relatively simple ways to reduce water usage in existing etch systems: cutting down cooling coil water flow, adding chillers to replace plant water for cooling, lowering flow rate nozzles for rinses, etc. This month, I’ll continue with more ways to control water usage in your etcher. Most of these are not easily retrofittable to existing equipment but should be given serious consideration when new equipment is contemplated. With the right combination of add-ons, it is possible to bring the amount of water used in an etch system to almost zero.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.