Taking Control at the Junction
January 22, 2018 | KAUSTEstimated reading time: 2 minutes
Controlling the electronic properties at the interface between materials could help in the quest for improvements in computer memory. KAUST researchers show that varying the atomic composition of boron-nitride-based alloys enables tuning of an important electronic property known as polarization.
When an electric field is applied to a single atom, it shifts the center of mass of the cloud of negatively charged electrons away from the positively charged nucleus it surrounds. In a crystalline solid, these so-called electric dipoles of all atoms combine to create electric polarization.
Some materials exhibit a spontaneous polarization, even without an external electric field. Such materials have potential uses in computer memory, however, this application requires a material system in which the polarization is controllable. Visiting Student Research Program (VSRP) student Kaikai Liu, his supervisor Xiaohang Li and coworkers investigated one approach to polarization engineering at the interface between boron-nitride-based alloys.
Spontaneous polarization is strongly dependent on the structure and composition of the atomic crystal. Some materials, known as piezo electrics, can change polarization when physically deformed.
The KAUST team used software called the Vienna ab initio Simulation Package to investigate the electronic properties of the ternary alloys boron aluminum nitride and boron gallium nitride. They looked at how they change as boron replaces aluminum and gallium atoms, respectively. "We calculated the spontaneous polarization and piezoelectric constants of boron nitride alloys within a newly proposed theoretical framework and the impact of the polarization at junctions of these two materials," says Liu.
The team showed that the spontaneous polarization changes very nonlinearly with increasing boron content; this contradicts previous studies that assume a linear relationship.
The reason for this nonlinearity is attributed to the volume deformation of the alloy's unusual atomic structure, known as wurtzite. The nonlinear change of the piezoelectric polarization is less pronounced, but evident. This arises because of the large difference in atomic spacing between boron nitride and both aluminum nitride and gallium nitride. Furthermore, boron aluminum nitride or boron gallium nitride can become nonpiezoelectric when the boron content is more than 87% and 74%, respectively.
This work shows that a large range of spontaneous and piezoelectric polarization constants could be made available simply by changing the boron content. This could be useful for developing optical and electronic junction devices formed at the interface between conventional nitride semiconductors and either boron aluminum nitride or boron gallium nitride.
"Our next step will be to experimentally test the proposed junctions, which our theory predicts could have much better device performance than current approaches," says Liu.
Suggested Items
IDTechEx Discusses Low-Loss Materials: The Enabler of Future Connected Vehicles?
05/06/2024 | IDTechExFuture connected vehicles will offer future drivers a safer, smoother, and more convenient driving experience. Not only will drivers get access to more navigation and entertainment options, but they will also gain access to safety technologies that will potentially reduce accidents, improve congestion, and reduce emissions globally by allowing vehicle safety systems to communicate with each other and with city traffic infrastructure.
LQDX Divests Aluminum Soldering Business - Mina™ - to Taiyo America Inc.
05/02/2024 | PRNewswireLQDX, formerly known as Averatek Corp., developer of high-performance materials for advanced semiconductor manufacturing, today announced that it has divested its aluminum soldering business – known as MinaTM – to Taiyo America Inc., a global market leader in advanced electronic materials.
Indium Corporation Expert to Present on Pb-Free Solder for Die-Attach in Discrete Power Applications
04/30/2024 | Indium CorporationIndium Corporation Product Manager – Semiconductor Dean Payne will present at the Advanced Packaging for Power Electronics conference, hosted by IMAPS, held May 8-9 in Woburn, Massachusetts, USA.
Real Time with... IPC APEX EXPO 2024: Adhesive Materials and Equipment Update with Dymax
05/01/2024 | Real Time with...IPC APEX EXPOVirginia Hogan, global business development manager at Dymax, discusses adhesive materials, dispensing and curing equipment, a new, high-reliability conformal coating, and various materials and dispensing methods.
Real Time with... IPC APEX EXPO 2024: Sustainability in the Industry
04/26/2024 | Real Time with...IPC APEX EXPOGuest Editor Henry Crandall and Chris Nash of Indium Corporation discuss the company's 90th anniversary and its focus on sustainability. They focus on the benefits of sustainable materials, their compatibility, and value propositions. The conversation also highlights how Durafuse LT technology's role in reducing reflow temperatures is leading to significant cost and energy savings. Nash also touches on downstream sustainability efforts such as using recycled materials for packaging.