-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueAdvancing the Advanced Materials Discussion
Moore’s Law is no more, and the advanced material solutions to grapple with this reality are surprising, stunning, and perhaps a bit daunting. Buckle up for a dive into advanced materials and a glimpse into the next chapters of electronics manufacturing.
Inventing the Future With SEL
Two years after launching its state-of-the-art PCB facility, SEL shares lessons in vision, execution, and innovation, plus insights from industry icons and technology leaders shaping the future of PCB fabrication.
Sales: From Pitch to PO
From the first cold call to finally receiving that first purchase order, the July PCB007 Magazine breaks down some critical parts of the sales stack. To up your sales game, read on!
- Articles
- Columns
- Links
- Media kit
||| MENU - pcb007 Magazine
Orbotech’s Strategic Decision for End-to-End Partnership Benefits Everyone
February 14, 2018 | Barry Matties, I-Connect007Estimated reading time: 14 minutes

Barry Matties met with Sharon Cohen, president of Orbotech West, at productronica 2017 to discuss what’s new at Orbotech, specifically their shift to be more customer-centric and to provide regional coverage across the globe. He also discusses the current trends in the marketplace and Industry 4.0.
Barry Matties: Sharon, can you start by telling us a little bit about the show?
Sharon Cohen: First of all, this show has been very successful for us. We expected it to be busy, but it completely exceeded our expectations. We started off with a thank-you dinner for close to 100 of our long term customers and partners. This set the tone for the rest of the show which was both busy and very productive, with more than a hundred meetings each day.
Matties: Were those all pre-arranged meetings, or was a lot of this spontaneous, as well?
Cohen: About 50% of the meetings were pre-arranged, so we expected a busy show. But it ended up being much busier than we expected. It was successful and we got a lot of feedback from our customers and fielded a lot of questions. Our customers shared their plans for moving forward, and of course, we had the opportunity to share our plans as well. So all in all, it was a very productive show.
Matties: What kind of concerns or questions are your customers coming to you with at this time?
Cohen: There’s a lot of focus on increasing productivity and throughput as the world of PCB manufacturing becomes more and more competitive. Our customers want to know how can they improve their production quality and how can they make sure that they remain competitive, not just for the short term but also for the long term. They also want our opinion on the manufacturing trends in China and Asia and how those trends may impact the European and the U.S. market.
Matties: And when they ask about the trends, what sort of response are you giving them?
Cohen: So first of all, in Asia we see a clear move towards mSAP, the modified semi-additive process, with finer lines and additional layers. We see increased HDI participation in other segments as well, such as automotive and more. And we also see those trends coming here in the future. Right now, the Western market is mainly focused on QTAs and prototypes, and they are looking for solutions to improve the turnaround time.
Matties: Here in Europe, I hear reports that the economy is doing quite well. The industry is robust at the moment. I'm guessing that's the same sort of feeling you have as well?
Cohen: Absolutely. Actually, we had a conversation here about an hour ago with a couple of suppliers who also admitted that it was a better year for them than they expected. I can see from our angle, we're working with most of the PCB manufacturers here in Europe. We see a lot of busy shops, a lot of customers trying to increase their capacity. It's a great opportunity for them to explore new technologies, and a great opportunity for us to assist.
Matties: Part of the understanding is that Orbotech is becoming more customer-focused. Tell me about that. What is the strategy now with your customers?
Cohen: True. So first of all, we changed our structure not just to become more customer-friendly, but also to become the best partners we can possibly be to our customers. The process started about a year and a half ago, when we began the restructuring. We shifted to a regional structure to help us create and maintain long-term relationships with our customers and to support their different needs—not just for specific purposes like post-sales or problem solving, but actually so that we could listen better to our customers’ needs and build strong relationships that would enable us to anticipate more and plan together. That was the first phase.
The next stage was the monitoring center. We created capabilities that we could remotely monitor, and that could provide us with actionable intelligence which we use to improve our customers’ experience. I’ll give you an example. We have the ability to know ahead of time if a particular machine is going to need maintenance or a part replaced. We can act on that intelligence and schedule the repair before an error occurs and can even prevent it from happening. These actions provide more flexibility to our customers, since the downtime can be scheduled at their convenience, at a time that will cause the least disruption possible. This is something that we're really proud of, and we're putting a lot of effort into this.
Matties: Orbotech has such insight and a wealth of information, because you're in a lot of different aspects, from imaging and beyond. Your data must just give you such an incredible advantage in product development and customer service. How do you use that data?
Cohen: It ties back in to the technology. Our goal is to increase the capacity and offer better support. We changed the organizational structure, we created the monitoring center, and we're actively supporting the yield of our customers. Last year we introduced the Precise™ 800, our automated optical shaping solution or AOS as we call it. The Precise leverages two incredibly innovative technologies—3D Shaping (3DS) Technology™ and Closed Loop Shaping Technology™—that allow for copper deposition as well as copper ablation, so we can increase the yield and the throughput of our customers. The data allows for partnering on the process, maintaining, and monitoring the performance, and helping at the tail end of the production to make sure that our customers can deliver what they need to their customers.
Matties: You introduced the Precise about a year or so ago. How many installs do you have, and how's that working out?
Cohen: I'm not able to share exact numbers of installation base, but I can say that we're very proud, and very successful.
Matties: But you have it out in the field, and it's being used?
Cohen: Absolutely. We have tens of machines already working in Europe, in the U.S. and, of course, in Asia, where the biggest install base is so far.
Page 1 of 3
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
Indium Corporation Earns Mexico Technology Award for New Halogen-Free Flux-Cored Wire
09/18/2025 | Indium CorporationIndium Corporation recently earned a Mexico Technology Award for its new high-reliability, halide- and halogen-free flux-cored wire, CW-807RS, which improves wetting speeds and cycle times for electronics assembly and robot soldering applications.
MacDermid Alpha Showcases Advanced Interconnect Solutions at PCIM Asia 2025
09/18/2025 | MacDermid Alpha Electronics SolutionsMacDermid Alpha Electronic Solutions, a global leader in materials for power electronics and semiconductor assembly, will showcase its latest interconnect innovations in electronic interconnect materials at PCIM Asia 2025, held from September 24 to 26 at the Shanghai New International Expo Centre, Booth N5-E30
Breakthrough in Non-Contact Solder Removal Earns Kurtz Ersa 2025 Mexico Technology Award at SMTA Guadalajara
09/18/2025 | Kurtz Ersa Inc.Kurtz Ersa Inc., a leading supplier of electronics production equipment, is proud to announce that it has been awarded a 2025 Mexico Technology Award in the category of Rework & Repair for its HR 600P Automatic Rework System.
Knocking Down the Bone Pile: Best Practices for Electronic Component Salvaging
09/17/2025 | Nash Bell -- Column: Knocking Down the Bone PileElectronic component salvaging is the practice of recovering high-value devices from PCBs taken from obsolete or superseded electronic products. These components can be reused in new assemblies, reducing dependence on newly purchased parts that may be costly or subject to long lead times.
Koh Young, Fuji, and Kurtz ERSA Drive Smart Manufacturing Solutions for EV and Automotive Electronics at Kunshan, China Technical Seminar
09/11/2025 | Koh YoungKoh Young Technology, the global leader in True 3D measurement-based inspection solutions, partnered with Fuji Corporation and Kurtz ERSA to host an exclusive technical seminar for leading automotive manufacturers in East China. Held on September 4 at Fuji’s factory in Kunshan, the event gathered participants representing over 35 companies.