Polymer Nanocarpets to Electrify Smart Fabrics
April 18, 2018 | Tomsk Polytechnic UniversityEstimated reading time: 2 minutes
Researchers from Tomsk Polytechnic University together with their international colleagues have discovered a method to modify the ultra-thin conductor of current and heat graphene without destroying it. Thanks to the novel method the researchers were able to synthesize on graphene samples of a well-structured polymer with a strong covalent bond, which they called ‘polymer carpets’. The entire structure is highly stable; it is less prone to degradation over the time that makes the study promising for the development of organic flexible electronics. In addition, if a layer of molybdenum disulphide is added over the ‘nanocarpet’, the resulting structure generates current under exposure to light. The study results were published in Journal of Materials Chemistry C.
The scheme for obtaining a hybrid structure of "graphene-polymer".
Graphene is simultaneously the most durable, light and an electrically conductive carbon compound. It can be used for manufacturing solar batteries, smartphone screens, thin and flexible electronics, and even in water filters since graphene films pass water molecules and stop all other compounds. Graphene should be integrated into complex structures to be used successfully. However, it is a challenge. According to scientists, graphene itself is stable enough and reacts poorly with other compounds. In order to react it with other elements, i.e. to modify it, graphene is destroyed. This affects the properties of the materials obtained.
Professor Raul Rodrigez from the Research School for Chemistry & Applied Biomedical Sciences says: ‘When destroying graphene, you should be very careful. If you overdo, the unique properties of graphene are lost. Therefore, we decided to follow a different path.
In graphene, there are inevitable nanodefects, for example, at the junction of faces. Hydrogen atoms are often attached to such defects. It is this hydrogen that can interact with other elements.’
To modify graphene, the authors use a thin metal substrate on which a graphene layer is placed. Then graphene is covered with the solution of bromine-polystyrene molecules. The molecules interact with hydrogen and are attached to the existing defects, resulting in polyhexylthiophene (P3HT). Further exposed to light during the photocatalysis, a polymer begins to ‘grow’.
‘In the output we obtained the samples which structure resembles ‘polymer carpets’ as we name then in the paper. Above such a ‘polymer carpet’ we place molybdenum disulphide.
Due to a unique combination of materials, we obtain ‘sandwich’ structure’ that functions like a solar battery. That is, it generates current exposed to light.
In our experiments a strong covalent bond is established between the molecules of the polymer and graphene, that is critical for the stability of the material obtained,’ notes Rodrigez.
According to the researcher, the method for graphene modification, on the one hand, enables to obtain a very strong compound, on the other hand, it is rather simple and cheap as affordable compounds are used. The method is versatile because it makes it possible to react graphene with very different polymers.
‘The strength of the obtained compound is achieved additionally because of that we do not destroy graphene itself and use existing defects, and a strong covalent bond between polymer molecules. This allows us to consider the study as promising for the development of thin and flexible electronics, when solar batteries can be attached to clothes, and when deformed they will not break down,’ the professor explains.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/03/2024 | Nolan Johnson, I-Connect007This week’s most important news is strategic—and telling. When one puts together the IPC industry reports, we simply have to include the recent conversation with Shawn DuBravac and Tom Kastner. On the design side, check out the latest “On The Line With…” podcast featuring Brad Griffin from Cadence Design Systems, discussing SI and PI in the realm of intelligent system design.
IMI Welcomes New CEO
05/03/2024 | IMIIntegrated Micro-Electronics, Inc. (IMI),The IMI Board of Directors announced, in a disclosure dated April 25, 2024, the appointment of Louis Sylvester Hughes, Chief Executive Officer (CEO).
Electronics Industry Sentiment Rose in April, Hitting New High
05/02/2024 | IPCApril 2024 marked the third consecutive month of sentiment growth among electronics manufacturers. When asked if they expected labor costs for hourly workers to rise over the next month, manufacturers in the United States, Mexico, and Europe predicted a five percent increase, while manufacturers in Asia predicted a slightly lower four percent increase.
iNEMI Names Grace O'Malley CTO
05/02/2024 | iNEMIThe Board of Directors of the International Electronics Manufacturing Initiative (iNEMI) has named Grace O'Malley Chief Technical Officer (CTO).
ZESTRON Academy Launches 2024 Advanced Packaging & Power Electronics Webinar Series
05/01/2024 | ZESTRONZESTRON, the leading global provider of high-precision cleaning products, services, and training solutions in the electronics manufacturing and semiconductor industries, proudly announces the launch of its highly anticipated webinar series on Advanced Packaging & Power Electronics, a webinar series on the latest innovations, cleaning, and corrosion challenges.