It’s Only Common Sense: Invest in Yourself—You’re Your Most Important Resource
Dan's Biz Bookshelf: 'Revenge of the Tipping Point'
Marcy's Musings: Engineering Economics
Atotech to Present New Flex, Flex-Rigid Products at C’Tex 2018
May 15, 2018 | AtotechEstimated reading time: 2 minutes
Atotech will showcase its latest production solutions for advanced HDI, flex, and flex-rigid PCBs in hall C1, booth AN6 at the C’Tex 2018 show. The trade show will be held in the Suzhou International Expo Center from May 16-18. Next to its product promotion at its trade show booth, the company takes part in the New Product Introduction sessions with the introduction of its new InPro THF chemistry.
On Thursday, May 17, from 2:00 to 2:40 pm, Mustafa Oezkoek, Global Product Manager for Panel and Pattern Plating at Atotech Deutschland GmbH, will present InPro THF for advanced HDI (mSAP). InPro THF provides reliable BMV filling performance at high current densities up to 3 A/dm² especially for mSAP applications in mass production. The process meets the technological and yield requirements for next generation HDI and packaging and provides pattern plating with excellent pattern distribution. It may also be used for TH filling and reduces the number of processing steps needed, thereby leading to improved reliability, productivity, and reduced costs. The three additive component system further provides excellent stability without the formation of harmful breakdown products.
InPro THF: Current density: 3.0 A/dm², dimple < 3μm
Additional product highlights at Atotech’s booth will be Cupracid Flex / InPro Flex, an economic conformal plating solution for standard flex and rigid-flex applications, and Stanna-COF, an immersion tin for chip on film technology.
Cupracid Flex / InPro Flex
Cupracid Flex and InPro Flex are specifically designed for standard conformal flex applications. The Cupracid Flex process is for use in vertical systems with soluble anodes whereas InPro Flex can be used in systems with insoluble anodes. Even at higher current density, pattern uniformity and line shape are very good. Both processes consist of a simple two additive system and provide excellent throwing power at high current densities without any corner flattening.
Stanna-COF
Stanna-COF is the latest extension to Atotech’s already well versed immersion tin family. The application enables Chip On Film (COF) technology. With Stanna-COF, the chips are bonded straight onto the tracks necessitating a smooth and even finish. The process assures improved yields and functionality and allows for high volume reel to reel production. Stanna-COF has the potential to enhance fine line capability and provides a protective and functional final finish as demanded by this technology.
For further information on these new products, visitors to the show are invited to join Atotech’s New Product Introduction presentation or pass by the Atotech booth in hall C1 number AN6 during the C’Tex show from May 16 to 18. Local and international product specialists will be on site to discuss any question or inquiry.
About Atotech
Atotech is one of the world’s leading manufacturers of specialty chemicals and equipment for the printed circuit board, IC substrate and semiconductor industries, as well as for the decorative and functional surface finishing industries. Atotech has annual sales of USD1.2 billion (2017). The company is fully committed to sustainability – we develop technologies to minimize waste and to reduce environmental impact. Atotech has its headquarters in Berlin, Germany, and employs about 4,000 people in over 40 countries. About a quarter of all staff works in one of the four locations in Germany: Berlin, Feucht, Neuruppin, and Trebur. For more information, click here.
Share on:
Suggested Items
At Schneider Electric, Future of MES/MOM Lies in the Cloud
11/26/2024 | Schneider ElectricSchneider Electric’s mission is to be the trusted partner for sustainability and efficiency. The company is helping customers across industries unlock efficiency, productivity, and resilience through digital transformation. Schneider Electric is also accelerating its own digital transformation across production facilities.
HPC Customer Engages Sondrel for High End Chip Design
11/25/2024 | SondrelSondrel, a leading provider of ultra-complex custom chips, has announced that it has started front end, RTL design and verification work on a high-performance computing (HPC) chip project for a major new customer.
NEOTech Significantly Improves Wire Bond Pull Test Process
11/25/2024 | NEOTechNEOTech, a leading provider of electronic manufacturing services (EMS), design engineering, and supply chain solutions in the high-tech industrial, medical device, and aerospace/defense markets, proudly announces a major advancement in its wire bond pull testing process, reducing manufacturing cycle time by more than 60% while maintaining industry-leading production yields of over 99.99%.
Standard of Excellence: Hiring for Quality Positions in Manufacturing, Engineering, and Management
11/26/2024 | Anaya Vardya -- Column: Standard of ExcellenceIn continuing my series on finding, signing, and keeping good people for your company, this month we discuss hiring good people for your quality department. Even when hiring was easier, hiring for the quality department has always been especially challenging. It takes a special kind of person: someone with attention to detail, someone ready to stand for his or her convictions, and someone who can stand up under pressure when the company needs to ship product and the quality manager refuses to because it is not up to par. The quality department is the very soul of any manufacturing company.
Rules of Thumb for PCB Layout
11/21/2024 | Andy Shaughnessy, I-Connect007The dictionary defines a “rule of thumb” as “a broadly accurate guide or principle, based on experience or practice rather than theory.” Rules of thumb are often the foundation of a PCB designer’s thought process when tackling a layout. Ultimately, a product spec or design guideline will provide the detailed design guidance, but rules of thumb can help to provide the general guidance that will help to streamline the layout process and avoid design or manufacturing issues.