-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueIn Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
The Essential Guide to Surface Finishes
We go back to basics this month with a recount of a little history, and look forward to addressing the many challenges that high density, high frequency, adhesion, SI, and corrosion concerns for harsh environments bring to the fore. We compare and contrast surface finishes by type and application, take a hard look at the many iterations of gold plating, and address palladium as a surface finish.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
AT&S Achieves Record Levels for Revenue and EBITDA in 2017/18
May 18, 2018 | AT&SEstimated reading time: 2 minutes
AT&S, a global technology leader for high-end printed circuit boards, ended the financial year 2017/18 with outstanding results. “AT&S accomplished record levels for revenue and EBITDA in 2017/18. Our investments of the past years are now bearing fruit, and the technology generations successfully introduced to the market contributed to growth,” said Andreas Gerstenmayer, CEO of AT&S.
Asset, financial and earnings position
Despite the challenging market and currency environment, AT&S increased consolidated revenue by 21.7% to € 991.8 million in the financial year 2017/18 (previous year: € 814.9 million). Strong demand in the automotive, industrial and medical segments as well as for high-end printed circuit boards for mobile devices, especially for the new technology generations mSAP and IC substrates, contributed to revenue growth. Negative currency effects, which were attributable to the increasingly weakening US dollar, had an effect of € -46.8 million on the Group’s revenue.
AT&S recorded a 72.6% increase in EBITDA to € 226.0 million in the financial year 2017/18 (previous year: € 130.9 million). This increase primarily resulted from a generally high operating performance (utilisation, yield, efficiency) at all plants and the successful introduction and fast optimisation of the new technology generation mSAP, for which AT&S has managed to achieve a leading market position. Negative currency effects from translation and valuation effects influenced EBITDA with € -28.5 million. The EBITDA margin rose from 16.1% to 22.8%, up 6.7 percentage points on the previous year.
An earnings analysis of the individual quarters shows that the financial year 2017/18 was characterised by a pronounced but not unusual seasonality, above all the fourth quarter; nevertheless, earnings exceeded the comparative figures of the previous year in all quarters.
Depreciation and amortisation rose primarily due to the additional lines at the Chongqing plant and amounted to € 135.7 million (previous year: € 124.7 million). EBIT increased to € 90.3 million (previous year: € 6.6 million) due to the good operating development and the favourable product mix. Accordingly, the EBIT margin improved to 9.1% (previous year: 0.8%).
Finance costs – net improved from €-17.5 million to €-14.8 million and thus remained at a low level. Tax expense increased to € 19.0 million in the reporting period in line with earnings (previous year: € 12.0 million). AT&S (China) Company Limited was granted the favoured tax status as a “High and New-Technology Enterprise (HNTE)” with retroactive effect for the calendar year 2017.
Consequently, the loss of € -22.9 million recorded in the previous year was turned into a profit for the year of € 56.5 million. Earnings per share improved to € 1.38 (previous year: € -0.59).
Cash flow and statement of financial position
As a result of the significant improvements in earnings at the Chinese plants, cash flow from earnings before changes in working capital increased from € 90.5 million to € 192.1 million. Due to the very good operating development, AT&S was able to finance all investments in property, plant and equipment from current business.
Equity rose to € 711.4 million (previous year: € 540.1 million). The increase results from the net proceeds of the placement of the hybrid bond and the profit for the year. Currency differences had a negative impact on equity.
Net debt decreased to € 209.2 million (previous year: € 380.6 million) due to the issue of the hybrid bond and strong cash flow from earnings before changes in working capital. Gearing consequently declined to 29.4% and was thus significantly below the prior-year level of 70.5%. The key figure net debt/EBITDA, which reflects a fictitious debt repayment period, improved from 2.9 years to 0.9 years and was thus clearly below the internal limit of 3.0 years.
Suggested Items
Hon Hai Research Institute Partners with Taiwan Academic Research Institute and KAUST to Participate in CLEO 2025
05/30/2025 | FoxconnThe research team of the Semiconductor Division of Hon Hai Research Institute, together with the research teams of National Taiwan University and King Abdullah University of Science and Technology in Saudi Arabia, has successfully made breakthroughs in multi-wavelength μ -LED technology to achieve high-speed visible light communication and optical interconnection between chips.
Meyer Burger Shuts Down Solar Module Production, Lays Off 282 Employees in the U.S.
05/30/2025 | Meyer BurgerMeyer Burger Technology AG is forced to stop its solar module production in the U.S., which is still ramping up, due to a lack of funds. On May 29, 2025, all 282 remaining employees at the Goodyear, Arizona, site received their notices of termination. Production with an annual capacity of 1.4 gigawatts was shut down immediately.
VJ Electronix Appoints Marco Cruz as Mexico Regional Sales Manager
05/30/2025 | VJ ElectronixVJ Electronix, Inc., the leader in rework technologies and global provider of advanced X-ray inspection and component counting systems, is pleased to announce the appointment of Marco Antonio Cruz Tovar as Mexico Regional Sales Manager.
Arrow Electronics Earns Dual Honors as Dell Technologies Partner of the Year
05/29/2025 | BUSINESS WIREGlobal technology solutions provider Arrow Electronics has received two prestigious awards from Dell Technologies: 2025 OEM Solutions Partner of the Year and 2025 North America Distributor of the Year. The awards were announced at Dell Technologies World, held in Las Vegas in late May.
Imec Unveils Record-Low Loss 300mm RF Silicon Interposer for Sub-THz Systems
05/27/2025 | ImecAt the IEEE ECTC 2025 conference, imec – a world-leading research and innovation hub in nanoelectronics and digital technologies – highlights the exceptional performance and flexibility of its 300mm RF silicon interposer platform.