CyberOptics Demonstrates Advanced Airborne Particle Sensing Technology at SEMICON West
May 24, 2018 | CyberOptics CorporationEstimated reading time: 2 minutes
CyberOptics Corporation announces plans to exhibit at SEMICON West, scheduled to take place July 10-12, 2018 at the Moscone Center in San Francisco, California. The company will demonstrate its next-generation Airborne Particle Sensor (APS3) 300mm with new ParticleSpectrum software in Booth #6163.
CyberOptics’ WaferSense APS3 speeds equipment set-up and long-term yields in semiconductor fabs by wirelessly detecting, identifying and monitoring airborne particles in real-time. With a thinner and lighter form factor to travel through semiconductor tools with ease, the APS3 offers leading accuracy and sensitivity valued by equipment and process engineers around the world.
The APS3 solution includes ParticleSpectrum software – a completely new, touch-enabled interface with user-friendly functionality, making it simple to read, record and review small to large airborne particle data. Easily identify when and where the particles originate and see the effects of cleanings, adjustments and repairs in real-time.
“We’ve taken what is documented as the best known method (BKM) for airborne particle sensing in semiconductor fabs to significantly improve yields and tool uptime, and made it even easier to use,” said Dr. Subodh Kulkarni, President and CEO, CyberOptics. “Engineers can monitor critical data from one, or multiple devices with an enhanced software application.”
CyberOptics’ Airborne Particle Sensors (APS) have proven to deliver up to 90% time savings, 95% expense reduction and up to 20X the throughput with half the manpower relative to legacy surface scan wafer methods.
Additionally, CyberOptics will display the new PanelSense™ Airborne Particle Sensor (APS-FPD) delivering the same valued benefits as the APS3, but designed specifically for the Flat Panel Display manufacturing market.
About the WaferSense, ReticleSense® and PanelSense Line
The WaferSense and ReticleSense measurement portfolio including the Auto Leveling System (ALS & ALSR), the Auto Gapping System (AGS), the Auto Vibration System (AVS), the Auto Teaching System (ATS), the Airborne Particle Sensors (APS 2, 3, APSR & APSRQ) and the new Auto Multi Sensor (AMS & AMSR), are available in various wafer shaped and reticle shaped form factors depending on the device. The PanelSense measurement portfolio including the Airborne Particle Sensor (APS-FPD) is available in a flat panel display compatible form factor.
About CyberOptics
CyberOptics Corporation is a leading global developer and manufacturer of high precision sensing technology solutions. CyberOptics sensors are being used in general purpose metrology and 3D scanning, surface mount technology (SMT) and semiconductor markets to significantly improve yields and productivity. By leveraging its leading edge technologies, the company has strategically established itself as a global leader in high precision 3D sensors, allowing CyberOptics to further increase its penetration of its key vertical segments. Headquartered in Minneapolis, Minnesota, CyberOptics conducts worldwide operations through its facilities in North America, Asia and Europe.
For more information about the entire line of CyberOptics solutions, click here.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Sigma Engineering's Recycling and Regeneration Systems for PCB Etching
05/02/2024 | Real Time with...IPC APEX EXPOEvan Howard of Schmoll America interviews Kristoffer Bjorklund, Sigma Engineering's supply chain manager. We learn about Sigma's recycling and regeneration systems for PCB industry etching and the benefits and challenges of implementing these systems in existing factories.
Boeing T-7A Red Hawk Triples Progress
05/01/2024 | BoeingThe Boeing T-7A Red Hawk achieved three recent milestones, propelling the advanced pilot trainer for the U.S. Air Force forward.
Merlin Flex invests in New Schmoll Direct Imaging System
04/30/2024 | Merlin Flex LtdMerlin Flex has fully installed and commissioned its 2nd Schmoll MDI Direct Imaging system. This new machine includes a twin bed, 4 head system which enhances Merlin Flex’s direct imaging capability for its 1.4M long flexible circuits.
Latest Test and Inspection Solutions from GOEPEL electronic at SMTconnect 2024
04/29/2024 | GOEPEL electronicGOEPEL electronic will be demonstrating automated test and inspection equipment at SMTconnect, taking place in Nuremberg from June 11 to 13, 2024.
TSMC Celebrates 30th North America Technology Symposium
04/29/2024 | TSMCTSMC unveiled its newest semiconductor process, advanced packaging, and 3D IC technologies for powering the next generation of AI innovations with silicon leadership at the Company’s 2024 North America Technology Symposium.