Automotive is Driving SiC Adoption
July 5, 2018 | Yole DéveloppementEstimated reading time: 2 minutes
The SiC power market is now on the road, asserts Yole Développement (Yole). Therefore, since 2017, the market research and strategy consulting company identified more than 20 strategic announcements, showing the dynamism of this market and attractiveness of the technology. Rohm, Bombardier, Cree, SDK, STMicroelectronics, Infineon Technologies, Littelfuse, Ascatron and more are part of the powerful ecosystem, presenting innovative products and revealing key partnerships and/or M&A .
Today, SiC transistors are clearly being adopted, penetrating smoothly into different applications. Yole’s analysts forecast a $1.4 billion SiC power semiconductor market by 2023. According to the Power & Wireless team at Yole, this market is showing a 29% CAGR between 2017 and 2023.
Power SiC report, 2018 edition presents Yole’s deep understanding of SiC penetration in different applications including xEV, xEV charging infrastructure, PFC/power supply, PV, UPS, motor drives, wind and rail. In addition, it highlights the state-of-the-art SiC-based devices, modules, and power stacks. Yole’s analysts also describe the SiC power industrial landscape from materials to systems, and analyze of SiC power market dynamics. This report proposes a detailed quantification of the SiC power device market until 2023, in value and volume.
SiC adoption is accelerating: is the supply chain ready? Yole’s analysts reveal today their vision of the SiC industry.
SiC market is still being driven by diodes used in PFC and PV applications. However Yole expects that in five years from now the main SiC device market driver will be transistors, with an impressive 50% CAGR for 2017-2023.
This adoption is partially thanks to the improvement of the transistor performance and reliability compared to the first generation of products, which gives confidence to customers for implementation.
Another key trend revealed by Yole’s analysts is the SiC adoption by automotive players, over the next 5-10 years. “Its implementation rate differs depending on where SiC is being used,” comments Dr. Hong Lin, Technology and Market Analyst, Compound Semiconductors at Yole. “That could be in the main inverter, in OBC or in the DC/DC converter. By 2018, more than 20 automotive companies are already using SiC SBDs or SiC MOSFET transistors for OBC, which will lead to 44% CAGR through to 2023.”
Yole expects SiC adoption in the main inverter by some pioneers, with an inspiring 108% market CAGR for 2017-2023. This will be possible because nearly all carmakers have projects to implement SiC in the main inverter in coming years. In particular, Chinese automotive players are strongly considering the adoption of SiC.
The recent SiC module developed by STMicroelectronics for Tesla and its Model 3 is a good example of this early adoption. The SiC-based inverter, analyzed by System Plus Consulting, Yole’s sister company is composed of 24 1-in-1 power modules. Each module contains two SiC MOSFETs with an innovative die attach solution and connected directly on the terminals with copper clips and thermally dissipated by copper baseplates. The thermal dissipation of the modules is performed thanks to a specifically designed pin-fin heatsink.
Suggested Items
The Chemical Connection: Reducing Etch System Water Usage, Part 2
05/02/2024 | Don Ball -- Column: The Chemical ConnectionIn my last column, I reviewed some relatively simple ways to reduce water usage in existing etch systems: cutting down cooling coil water flow, adding chillers to replace plant water for cooling, lowering flow rate nozzles for rinses, etc. This month, I’ll continue with more ways to control water usage in your etcher. Most of these are not easily retrofittable to existing equipment but should be given serious consideration when new equipment is contemplated. With the right combination of add-ons, it is possible to bring the amount of water used in an etch system to almost zero.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.