-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Susy Webb: Training the New Generation of Designers
August 2, 2018 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 3 minutes
For years, I’ve been running into Susy Webb at PCB West, where one of the classes she teaches is PCB design basics. I always ask Susy about the class, especially the attendees’ backgrounds. Over the years, her class has begun drawing more and more degreed engineers, with fewer “traditional” PCB designers attending.
In this conference call with I-Connect007 Editors Happy Holden and Patty Goldman, I asked Susy to discuss the next generation of PCB designers, some of the trends she’s seeing among new PCB designers, and the need for designers to take charge of their own design training, whether their management agrees or not.
Andy Shaughnessy: Susy, you teach a PCB basics class. Why don’t you give us a quick review of the class and what you teach in the class?
Susy Webb: The class started out as a two-day class and it has changed over the years, sometimes going down to half a day and sometimes up to a full day. For the last few years it's been a full day class. There's way more material than can be covered in one day, so that requires me to step back to 10,000 feet and shoot at the major topics involved with design like building library parts, placement, and routing techniques. Since it's a basics class, I never know ahead of time whether I’ll be getting somebody who's been pulled into the realm of design from other areas, and is completely new to design.
Some people come in that way, needing the absolute basics, or some people come in for a refresher, or as engineers, and they all want slightly different information discussed in the class, and when there is just one day, you do what you can do. I do explain that when we start the class. So it can be rather basic for some and sometimes over-the-head for others. It’s a hard line to draw to figure out what goes into a class and what doesn't.
Shaughnessy: I started asking you about your class years ago, and it was almost all designers with the occasional engineer. Tell us how that's changed.
Webb: I do think it's been gradual. My honest opinion is that most engineers don’t really want to design boards, they just want the designs done right, and the boards to function properly. The technology has changed so much and the vision that engineers and their management still have is of designers being connect-the-dots kind of people. So, that leaves it to engineers to pick up the gauntlet and move forward with it. And that's not a bash on engineers at all; I'm glad they want to know about PCB design. But I don't think they want to be a designer full time. I think they want to be engineers, designing and testing circuits rather than designing boards. Both have equal challenges and both have equal rewards. But if you've been trained in college to be a circuit designer, you don't necessarily want to design the board as well.
Designing has gotten so much more complex over last 15–20 years, and perceptions have not kept up. People tend to think that the engineers need to do it, but that's not necessarily the case. I believe that the people who have been in the field, or are interested in the field, need to work at getting training and continuously learning in order to show managers that they have what it takes. They also need to push their management to pay for the training they need, so that they can deliver the best product. Because it's challenging. You have to understand how the signals work within the board structure itself, as opposed to understanding how this signal needs to connect to that part, and everything else that goes with it.
Shaughnessy: Do you find that the EEs in your class get any sort of PCB layout experience in college, any sort of education on PCB design?
Webb: You're going to pin me against the wall on that issue [laughs]. I understand that many engineers have been taught to design a simple circuit and make it into a simple board, and maybe even have it fabricated and assembled. So they say, “Yeah, I've done a board.” But that's not really what board design is all about.
To read this entire interview, which appeared in the July 2018 issue of Design007 Magazine, click here.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/03/2024 | Nolan Johnson, I-Connect007This week’s most important news is strategic—and telling. When one puts together the IPC industry reports, we simply have to include the recent conversation with Shawn DuBravac and Tom Kastner. On the design side, check out the latest “On The Line With…” podcast featuring Brad Griffin from Cadence Design Systems, discussing SI and PI in the realm of intelligent system design.
Synopsys, Samsung Electronics Collaborate to Achieve First Production Tapeout of Flagship Mobile CPU
05/03/2024 | PRNewswireSynopsys, Inc. announced that Samsung Electronics has achieved successful production tapeout for its high-performance mobile SoC design, including flagship CPUs and GPUs, with 300MHz higher performance using Synopsys.ai™ full stack AI-driven EDA suite and a broad portfolio of Synopsys IP on Samsung Foundry's latest Gate-All-Around (GAA) process technologies.
Altair Acquires Research in Flight, Forging a New Path for Aerodynamic Analysis
05/03/2024 | AltairAltair a global leader in computational intelligence, announced it has acquired Research in Flight, maker of FlightStream®, which provides computational fluid dynamics (CFD) software with a large footprint in the aerospace and defense sector and a growing presence in marine, energy, turbomachinery, and automotive applications.
Real Time with… IPC APEX EXPO 2024: Software Solutions for Circuit Board Challenges
05/03/2024 | Real Time with...IPC APEX EXPONolan Johnson speaks with Will Webb from Aster Technologies about their software solutions for design teams, manufacturing, test engineers, and process engineers. Aster's software addresses the increasing complexities of circuit boards and the need for alternative testing methods.
Real Time with… IPC APEX EXPO 2024: My Role as a Technology Solutions Director
05/02/2024 | Real Time with...IPC APEX EXPOPeter Tranitz, senior director of technology solutions at IPC, shares insights into his role as the design initiative lead. He details his advocacy work, industry support, and the responsibilities of the design initiative committee. The conversation also covers the revamping of standards, the IPC Design Competition, and the implementation of design rules in software tools.