New 3D-Printed Device Could Help Treat Spinal Cord Injuries
August 10, 2018 | University of MinnesotaEstimated reading time: 4 minutes
Engineers and medical researchers at the University of Minnesota have teamed up to create a groundbreaking 3D-printed device that could someday help patients with long-term spinal cord injuries regain some function.
Image Caption: University of Minnesota researchers developed a prototype of a 3D-printed device with living cells that could help spinal cord patients restore some function. The size of the device could be custom-printed to fit each patient’s spinal cord. The patient’s own cells would be printed on the guide to avoid rejection in the body.
A 3D-printed guide, made of silicone, serves as a platform for specialized cells that are then 3D printed on top of it. The guide would be surgically implanted into the injured area of the spinal cord where it would serve as a type of “bridge” between living nerve cells above and below the area of injury. The hope is that this would help patients alleviate pain as well as regain some functions like control of muscles, bowel and bladder.
“This is the first time anyone has been able to directly 3D print neuronal stem cells derived from adult human cells on a 3D-printed guide and have the cells differentiate into active nerve cells in the lab,” said Michael McAlpine, Ph.D., a co-author of the study and University of Minnesota Benjamin Mayhugh associate professor of Mechanical Engineering in the University’s College of Science and Engineering.
“This is a very exciting first step in developing a treatment to help people with spinal cord injuries,” said Ann Parr, M.D., Ph.D., a co-author of the study and University of Minnesota Medical School assistant professor in the Department of Neurosurgery and Stem Cell Institute. “Currently, there aren’t any good, precise treatments for those with long-term spinal cord injuries.”
There are currently about 285,000 people in the United States who suffer from spinal cord injuries, with about 17,000 new spinal cord injuries nationwide each year.
In this new process developed at the University of Minnesota over the last two years, researchers start with any kind of cell from an adult, such as a skin cell or blood cell. Using new bioengineering techniques, the medical researchers can reprogram the cells into neuronal stem cells. The engineers print these cells onto a silicone guide using a unique 3D-printing technology in which the same 3D printer is used to print both the guide and the cells. The guide keeps the cells alive and allows them to change into neurons. The team developed a prototype guide that would be surgically implanted into the damaged part of the spinal cord and help connect living cells on each side of the injury.
“Everything came together at the right time,” Parr said. “We were able to use the latest cell bioengineering techniques developed in just the last few years and combine that with cutting-edge 3D-printing techniques.”
Even with the latest technology, developing the prototype guides wasn’t easy.
“3D printing such delicate cells was very difficult,” McAlpine said. “The hard part is keeping the cells happy and alive. We tested several different recipes in the printing process. The fact that we were able to keep about 75% of the cells alive during the 3D-printing process and then have them turn into healthy neurons is pretty amazing.”
If the next steps are successful, the payoff for this research could be life-changing for those who suffer from spinal cord injuries.
“We’ve found that relaying any signals across the injury could improve functions for the patients,” Parr said. “There’s a perception that people with spinal cord injuries will only be happy if they can walk again. In reality, most want simple things like bladder control or to be able to stop uncontrollable movements of their legs. These simple improvements in function could greatly improve their lives.”
In addition to McAlpine and Parr, the University of Minnesota research team includes Department of Mechanical Engineering staff and students Daeha Joung, Shuang-Zhuang Guo, Joseph R. Monat, Fanben Meng, and Sung Hyun Park; Department of Neurosurgery and Stem Cell Institute staff and students Vincent Truong, Colin C. Neitzke, and Patrick J. Walsh; and Department of Genetics, Cell Biology and Development and Stem Cell Institute Assistant Professor James R. Dutton.
The research was funded primarily by Conquer Paralysis Now, a global project of the Sam Schmidt Foundation; the Minnesota Spinal Cord Injury and Traumatic Brain Injury Research Grant Program; the National Institute of Biomedical Imaging and Bioengineering of the National Institutes of Health; the University of Minnesota Clinical and Translational Science Institute; and an anonymous donor.
This color-enhanced image shows living cells that survived the 3D-printing process. Neuronal stem cells derived from adult human cells were 3-D printed on a guide and the cells differentiated into active nerve cells in the lab. Credit: University of Minnesota
Suggested Items
Merlin Flex invests in New Schmoll Direct Imaging System
04/30/2024 | Merlin Flex LtdMerlin Flex has fully installed and commissioned its 2nd Schmoll MDI Direct Imaging system. This new machine includes a twin bed, 4 head system which enhances Merlin Flex’s direct imaging capability for its 1.4M long flexible circuits.
Inkjet Solder Mask ‘Has Arrived’
04/10/2024 | Pete Starkey, I-Connect007I was delighted to be invited to attend an interactive webinar entitled “Solder Mask Coating Made Easy with Additive Manufacturing,” hosted by SUSS MicroTec Netherlands in Eindhoven. The webinar was introduced and moderated by André Bodegom, managing director at Adeon Technologies, and the speakers were Mariana Van Dam, senior product manager PCB imaging solutions at AGFA in Belgium; Ashley Steers, sales manager at Electra Polymers in the UK; and Dr. Luca Gautero, product manager at SUSS MicroTec Netherlands.
NetVia Group Acquires Direct Imaging from Mivatek
04/09/2024 | Miva TechnologiesMiva Technologies is pleased to announce NetVia Group, Irving, TX has acquired a new Miva 2400NG Dual Tray Direct Imaging System with 30-micron capabilities for inner, outer and soldermask imaging.
Teledyne to Acquire Adimec
02/13/2024 | TeledyneTeledyne Technologies Incorporated announced that it has entered into an agreement to acquire Adimec Holding B.V. and its subsidiaries.
Real Time with... productronica 2023: MivaTek Global Advances Technology With High-res Imaging System
12/08/2023 | Real Time with...productronicaMivaTek's Brendan Hogan talks about how the company employs Digitally Adaptive Rasterization Technology (DART) in their high-res imaging equipment. He also shares how the blurred line between semiconductors and microelectronics is driving broader application of the imaging process.