Graphene Printing Technique 'Silk Screens' Flexible Electronics
October 22, 2018 | IEEEEstimated reading time: 4 minutes
Future high-efficiency solar cells molded to the surface of a car; ultra-small photonics chips; and low-power, long-lasting wearable devices will all require something no one’s yet been able to achieve, namely chips made from high-efficiency materials that are flexible, thin and inexpensive to manufacture.
A research group at MIT has announced a couple of developments in recent weeks that bring such a confluence of innovations closer to the achievable. Jeehwan Kim’s research group announced separately this month in Nature Materials and Science that they can inexpensively mass-produce ultra-thin gallium arsenide and gallium nitride chips as well as a harvest the monolayer materials necessary for manufacturing other 2-D electronics like tiny photonics devices.
“We [found] the way to go to expensive semiconducting materials so you can keep producing high-quality, high-performance semiconductors with a cheaper price,” says Kim, associate professor of mechanical engineering and materials science at MIT. “The bonus is you can have flexible semiconducting devices, and because they’re really thin, you can stack them up.”
As Spectrum reported last year, Kim’s group essentially uses graphene sheets as nano-sized silk screens through which expensively manufactured exotic material-based semiconductors can be laid down.
The recipe: Take a costly, manufactured, ultra-thin film of pure semiconducting material like gallium arsenide and lay a single-layered sheet of graphene on top of it. Then flow atoms of gallium and arsenide over the graphene, and the intermediary sheet acts as a surface on which an identical copy of the underlying ultra-thin film is copied on top of the graphene — although how and why the process worked as well as it did had previously been unclear.
In the current work, Kim’s group has expanded and generalized their previous finding — discovering that on one hand that single atom crystals like silicon cannot be replicated by the “silk screen” technique (what the group calls remote epitaxy) but on the other hand that practically any 2D sheet or film whose molecules carry any net electric polarity to them can be mass produced via remote epitaxy.
The reason, the group discovered, is that electrically the graphene behaves as if it’s not even there, transmitting the ionic electric fields from the 2D material up to the slurry of raw materials resting on top of the graphene. The fields then guide the slurry into forming a perfect duplicate of the expensively manufactured thin film below.
Kim uses the shorthand term “copy-paste” to describe the simple and seemingly inexpensive procedure as it’s now being developed. (He admits, however, he cannot give price quotes at the moment, because they haven’t yet done an economic analysis of the process.)
“We were able to copy-paste … through graphene for many types of compound materials in the periodic table,” says Kim. “That is a big discovery. Based on that understanding, we were able to make single-crystalline, free-standing, very very thin membrane compound materials.”
Kim says his research group is working with “six major companies” in Korea, Japan and the United States to scale up the ultra-thin chip manufacturing processes they’re developing. He expects some of these technologies might only need “a couple years” before they’re potentially ready for commercial application.
The industries and product lines Kim says could find use for the remote epitaxy process include solar energy (cheap but ultra-efficient GaAs solar panels have long been a dream), photonics (layering multiple ultra thin films on top of each other, say, that each are efficient at transmitting red LED light and blue LED light), wearables (making electronics ultra flexible but also low power is a holy grail in the field) and IoT (ditto).
The group has a portfolio of published results that includes the graphene remote epitaxy process. Also in the running is another 2D material manufacturing technique, the one published in Science.
“We developed a way to handle wafer-scale two-dimensional materials with atomic precision,” Kim says. The idea is other materials that could be useful as conductors, insulators and semiconductors may not necessarily work with the graphene method. In which case, Kim’s group has a second method for peeling off individual individual atom-thick monolayers.
As they spell out in the Science paper, they discovered that other ultra-thin films that may for various reasons not work as well with remote epitaxy could still be copied in another way. Compounds like hexagonal boron nitride (attractive as a lubricant, electrical insulator or light emitter) and tungsten disulfide (another possible post-silicon solar panel material) can be flaked off into single-atom thick sheets with a process Kim’s lab calls controlled crack propagation.
The process involves growing a thick material on a wafer and then attaching the top of that material to a nickel plate. (2D films adhere more strongly to nickel.) The nickel plate can then be pulled up, in the process exfoliating a single-atom layer thick of the target material. The exfoliated 2D film can then be laid down onto a host wafer as part of that wafer’s manufacturing process.
Arbitrarily many single-atom thick layers can be laid down this way, Kim says, leading to new kinds of electronic devices that demand complex semiconducting substrates.
“There has been no way of handling this one atom-thick layer controllably,” Kim says. “That’s why industry has not been discussing using 2D materials in next-generation electronics. [But] we can just grow thick 2D material on the wafer. Then we just peel off one monolayer, then one monolayer. We can harvest a lot of 2D materials from … the wafer.”
Between remote epitaxy and controlled crack propagation, Kim says many more flexible, efficient electronic, photonic and other thin-film based technologies can now be more reliably mass-produced.
MIT researchers have devised a way to grow a single crystalline compound semiconductor on its substrate through two-dimensional materials. The compound semiconductor thin film is then exfoliated by a flexible substrate, showing the rainbow color that comes from thin film interference.
By Mark Anderson
Suggested Items
LQDX Divests Aluminum Soldering Business - Mina™ - to Taiyo America Inc.
05/02/2024 | PRNewswireLQDX, formerly known as Averatek Corp., developer of high-performance materials for advanced semiconductor manufacturing, today announced that it has divested its aluminum soldering business – known as MinaTM – to Taiyo America Inc., a global market leader in advanced electronic materials.
Indium Corporation Expert to Present on Pb-Free Solder for Die-Attach in Discrete Power Applications
04/30/2024 | Indium CorporationIndium Corporation Product Manager – Semiconductor Dean Payne will present at the Advanced Packaging for Power Electronics conference, hosted by IMAPS, held May 8-9 in Woburn, Massachusetts, USA.
Real Time with... IPC APEX EXPO 2024: Adhesive Materials and Equipment Update with Dymax
05/01/2024 | Real Time with...IPC APEX EXPOVirginia Hogan, global business development manager at Dymax, discusses adhesive materials, dispensing and curing equipment, a new, high-reliability conformal coating, and various materials and dispensing methods.
Real Time with... IPC APEX EXPO 2024: Sustainability in the Industry
04/26/2024 | Real Time with...IPC APEX EXPOGuest Editor Henry Crandall and Chris Nash of Indium Corporation discuss the company's 90th anniversary and its focus on sustainability. They focus on the benefits of sustainable materials, their compatibility, and value propositions. The conversation also highlights how Durafuse LT technology's role in reducing reflow temperatures is leading to significant cost and energy savings. Nash also touches on downstream sustainability efforts such as using recycled materials for packaging.
SMC Korea 2024 to Highlight Semiconductor Materials Trends and Innovations on Industry’s Path to $1 Trillion
04/24/2024 | SEMIWith Korea a major consumer of semiconductor materials and advanced materials a key driver of innovation on the industry’s path to $1 trillion, industry leaders and experts will gather at SMC (Strategic Materials Conference) Korea 2024 on May 29 at the Suwon Convention Center in Gyeonggi-do, South Korea to provide insights into the latest materials developments and trends. Registration is open.