DRAM Market to See Lower Capital Expenditure and Moderated Bit Output in 2019
January 2, 2019 | TrendForceEstimated reading time: 2 minutes
After contract prices of DRAM products turned downward sharply in 4Q18 by 10% QoQ, major DRAM manufacturers have tried to offset fall in prices by slowing down capacity expansion in 2019, as the demand outlook for PCs, servers, smartphones, and other end consumer products remains weak, reports DRAMeXchange, a division of TrendForce.
DRAMeXchange points out that, manufacturers’ capex plans are normally the most relevant indicators for their actual bit output. In 2019, the total capital expenditure for DRAM production is forecast at about $18 billion, an annual decrease of 10%. This CAPEX is at the most conservative investment level in recent years.
Samsung and SK Hynix have been the first two suppliers who announced the plans to cut their 2019 semiconductor capex. Samsung, the market leader, would spend $8 billion on capex in 2019, mainly for migration to advanced process (1Ynm) and development of new products. Samsung’s 2019 plan for wafer starts would be the most conservative in recent years. The company has also decided to terminate the production capacity expansion in its Pyeongtaek fab, which will lower Samsung’s annual output growth to around 20%, a new low over the years.
SK Hynix says its 2019 capex will be reduced to $5.5 billion, mainly for migration to advanced process and yield improvement. However, its new fab in Wuxi has just been completed, with potential capacity expansion of 30-40K pieces for the whole year of 2019. According to DRAMeXchange, SK Hynix’s output growth would be 21% YoY in 2019, slightly higher than that of Samsung.
As for Micron, who has recently announced to cut its capex to $3 billion, revised its 2019 output growth forecast downward to 15%, from almost 20% previously, in order to prevent its inventory level from increasing further. Micron would not expand its production capacity in its subsidiary Micron Memory Taiwan (formerly Rexchip), Micron Technology Taiwan (formerly Inotera), or its Hiroshima fab of former Elpida Memory, so Micron’s monthly wafer starts would remain 350K in 2019. And the output growth would only come from its migration to 1Ynm production this year. DRAMeXchange believes that Micron is more vulnerable to the drop in prices due to its weaker cost structure than Samsung and SK Hynix. Thus, Micron has to make more production and capex adjustments to cope with the price falls. As the result, Micron's market share would continue to decrease after two years with only 15% growth in bit output.
Manufacturers Try to Avoid Price Competition and Maintain Profitability by Slowing Down Capacity Expansion
In the oligopolistic market with no new competitors, manufacturers have tried to adjust their production plans and cut down capex to avoid price competition. In terms of profitability, the gross margins of Samsung’s and SK Hynix’s DRAM production remain nearly 80%, while that of Micron remains over 60%. With such high margins, it is reasonable for the manufacturers to be conservative in their production outlook for 2019.
On the demand front, the first quarter of 2019 will witness the weakest demand of the year due to holidays and seasonal headwinds. Moreover, there is currently no sign of demand recovery in the second quarter or afterwards. The market is still full of uncertainties due to the looming trade war between China and the U.S. Therefore, for the DRAM price trends this year, DRAMeXchange expects a quarterly decline of 15% in 1Q19, and less than 10% in 2Q19. For 2H19, the prices would continue to fall by 5% each quarter unless the demand is significantly improved.
Suggested Items
GPV's Handover of Refurbished Factory Building
05/07/2024 | GPVOn 6 May 2024, Bjorn Fiskers, MD at GPV Electronics TH in Thailand and his team were handed the keys to our refurbished factory building, adding another 7,000 sqm to our current 15,000 sqm electronics factory. Our electronics factory in Thailand will comprise of a total of 22,000 sqm.
Siemens Delivers New Solido IP Validation Suite
05/07/2024 | SiemensSiemens Digital Industries Software introduced Solido™ IP Validation Suite software, a comprehensive, automated signoff solution for quality assurance across all design intellectual property (IP) types, including standard cells, memories and IP blocks.
Sypris Receives New Releases Under Electronic Warfare Program
05/03/2024 | Sypris Electronics LLCSypris Electronics, LLC, a subsidiary of Sypris Solutions, Inc., announced that it has recently received additional releases under a multi-year production contract that was first announced in 2022. The order, which provides for Sypris to begin deliveries in 2024, calls for the manufacture and test of electronic assemblies for an additional four systems to be supplied to a U.S. DOD contractor.
Gstar Announced the Strategic Move: Groundbreaking of Silicon Wafer Factory Construction in Indonesia
05/03/2024 | PRNewswireRecently, Gstar held a groundbreaking ceremony for its silicon rod and silicon wafer factory, marking the beginning of the rapid construction phase.
GPV’s Q1 2024 Interim Financial Report Shows Strong Navigation in Uncertain Times
05/01/2024 | GPVDanish-based GPV recorded an expected drop in sales to DKK 2.3 billion for the first quarter of 2024. The decline also affected the operating profit, which was DKK 155 million compared to DKK 179 million in the same quarter last year, although the EBITDA margin was maintained. In general, demand has been softer in 2024, but GPV continues to invest for the long-term and expects the trend to turn in the second half of 2024.