Designing Tiny Semiconductor Particles for Wide-Ranging Applications
January 25, 2019 | NUSEstimated reading time: 3 minutes
Two-dimensional (2D) transition metal dichalcogenides (TMDs) nanomaterials such as molybdenite (MoS2), which possess a similar structure as graphene, have been donned the materials of the future for their wide range of potential applications in biomedicine, sensors, catalysts, photodetectors and energy storage devices.
Image Caption: MoS2 quantum dots in aqueous solution (left) and an ultrahigh magnification of a MoS2 quantum dot (right). MoS2 quantum dots synthesised with the new approach developed by NUS researchers can potentially generate cancer-killing properties.
The smaller counterpart of 2D TMDs, also known as TMD quantum dots (QDs) further accentuate the optical and electronic properties of TMDs, and are highly exploitable for catalytic and biomedical applications. However, TMD QDs is hardly used in applications as the synthesis of TMD QDs remains challenging.
Now, engineers from the National University of Singapore (NUS) have developed a cost-effective and scalable strategy to synthesise TMD QDs. The new strategy also allows the properties of TMD QDs to be engineered specifically for different applications, thereby making a leap forward in helping to realise the potential of TMD QDs.
Bottom-Up Strategy to Synthesise TMD QDs
Current synthesis of TMD nanomaterials rely on a top-down approach where TMD mineral ores are collected and broken down from millimetre to nanometre scale via physical or chemical means. This method, while effective in synthesising TMD nanomaterials with precision, is low in scalability and costly as separating the fragments of nanomaterials by size requires multiple purification processes. Using the same method to produce TMD QDs of a consistent size is also extremely difficult due to their minute size.
To overcome this challenge, a team of engineers from the Department of Chemical and Biomolecular Engineering at NUS Faculty of Engineering developed a novel bottom-up synthesis strategy that can consistently construct TMD QDs of a specific size, a cheaper and more scalable method than the conventional top-down approach. The TMD QDs are synthesised by reacting transition metal oxides or chlorides with chalogen precursors under mild aqueous and room temperature conditions. Using the bottom-up approach, the team successfully synthesised a small library of seven TMD QDs and were able to alter their electronic and optical properties accordingly.
Associate Professor David Leong from the Department of Chemical and Biomolecular Engineering at NUS Faculty of Engineering led the development of this new synthesis method. He explained, “Using the bottom-up approach to synthesise TMD QDs is like constructing a building from scratch using concrete, steel and glass component; it gives us full control over the design and features of the building. Similarly, this bottom-up approach allows us to vary the ratio of transition metal ions and chalcogen ions in the reaction to synthesise the TMD QDs with the properties we desire. In addition, through our bottom-up approach, we are able to synthesise new TMD QDs that are not found naturally. They may have new properties that can lead to newer applications.”
Applying TMD QDs in Cancer Therapy and Beyond
The team of NUS engineers then synthesised MoS2 QDs to demonstrate proof-of-concept biomedical applications. Through their experiments, the team showed that the defect properties of MoS2 QDs can be engineered with precision using the bottom-up approach to generate varying levels of oxidative stress, and can therefore be used for photodynamic therapy, an emerging cancer therapy.
“Photodynamic therapy currently utilises photosensitive organic compounds that produce oxidative stress to kill cancer cells. These organic compounds can remain in the body for a few days and patients receiving this kind of photodynamic therapy are advised against unnecessary exposure to bright light. TMD QDs such as MoS2 QDs may offer a safer alternative to these organic compounds as some transition metals like Mo are themselves essential minerals and can be quickly metabolised after the photodynamic treatment. We will conduct further tests to verify this.” Assoc Prof Leong added.
The potential of TMD QDs, however, goes far beyond just biomedical applications. Moving forward, the team is working on expanding its library of TMD QDs using the bottom-up strategy, and to optimise them for other applications such as the next generation TV and electronic device screens, advanced electronics components and even solar cells.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Ventec Discusses New Pro-bond Family of Advanced Products
05/01/2024 | Real Time with...IPC APEX EXPOChris Hanson, Ventec's Global Head of IMS Technology, outlines the launch of four pro-bond formulas that deliver an outstanding combination of low dissipation factor (Df) with a dielectric constant (Dk) range to maximize the design window for critical PCB parameters. As Chris points out, Pro-bond is designed for low-loss, high-speed applications, while thermal-bond dissipates heat from a component through the board to a heat sink.
indie Semiconductor Launches Advanced Smart Connectivity Solutions for In-Cabin Applications
04/23/2024 | indie Semiconductorindie Semiconductor, Inc., an Autotech solutions innovator, has introduced a family of new high-performance video converters and retimers to enable in-cabin connectivity applications, including audio and video transport and device interfacing.
IDTechEx Discusses the Role of Printed Sensors in Mass-Digitization
04/11/2024 | PRNewswireIntegrated sensors digitizing physical interactions are vital in everyday life. From personalized user experiences to warehouse inventory management, data-driven insights are driving demand for smarter sensors — and lots of them.
MKS Introduces ESI Geode G2 CO2 Laser System for High- Precision and High-Speed HDI and mSap Via Drilling
04/09/2024 | MKS Instruments, Inc.MKS Instruments, Inc., a global provider of technologies that transform our world, today announced the official launch of the ESI Geode™ G2 laser drill system, the next generation of the Geode™ platform for processing PCB and ICP materials.
DuPont Unveils Pyralux ML Laminate Series, Offering High Thermal Management for Extreme Environments
04/09/2024 | DuPontDuPont introduced the DuPont™ Pyralux® ML Series of double-sided metal-clad laminates, a unique addition to its extensive family of Pyralux® laminates for flexible and rigid-flex printed circuit boards (PCBs).