Researchers Develop a New Self-Assembling Nanomaterial for Solar Power
January 29, 2019 | ASRCEstimated reading time: 3 minutes
Solar rays are a plentiful, clean source of energy that is becoming increasingly important as the world works to shift away from power sources that contribute to global warming. But current methods of harvesting solar charges are expensive and inefficient—with a theoretical efficiency limit of 33%.
Image Caption: In this illustration, DPP and rylene dye molecules come together to create a self-assembled superstructure. Electrons within the structure absorb and become excited by light photons, and then couple with neighboring electrons to share energy and create additional excited electrons that can be harvested to create solar cells.
New nanomaterials developed by researchers at the Advanced Science Research Center (ASRC) at The Graduate Center of The City University of New York (CUNY) could provide a pathway to more efficient and potentially affordable harvesting of solar energy.
The materials, created by scientists with the ASRC’s Nanoscience Initiative, use a process called singlet fission to produce and extend the life of harvestable light-generated electrons. The discovery is described in a newly published paper in the Journal of Physical Chemistry. Early research suggests these materials could create more usable charges and increase the theoretical efficiency of solar cells up to 44 percent.
“We modified some of the molecules in commonly used industrial dyes to create self-assembling materials that facilitate a greater yield of harvestable electrons and extend the electrons’ xcited-state lifetimes, giving us more time to collect them in a solar cell,” said Andrew Levine, lead author of the paper and a Ph.D. student at The Graduate Center.
The self-assembly process, Levine explained, causes the dye molecules to stack in a particular way. This stacking allows dyes that have absorbed solar photons to couple and share energy with —or “excite”—neighboring dyes. The electrons in these dyes then decouple so that they can be collected as harvestable solar energy.
Methodology and Findings
To develop the materials, researchers combined various versions of two frequently used industrial dyes—diketopyrrolopyrrole (DPP) and rylene. This resulted in the formation of six self-assembling superstructures, which scientists investigated using electron microscopy and advanced spectroscopy. They found that each combination had subtle differences in geometry that affected the dyes’ excited states, the occurrence of singlet fission, and the yield and lifetime of harvestable electrons.
Significance
“This work provides us with a library of nanomaterials that we can study for harvesting solar energy,” said Professor Adam Braunschweig, lead researcher on the study and an associate professor with the ASRC Nanoscience Initiative and the Chemistry Departments at Hunter College and The Graduate Center. “Our method for combining the dyes into functional materials using self-assembly means we can carefully tune their properties and increase the efficiency of the critical light-harvesting process.”
The materials’ ability to self-assemble could also shorten the time for creating commercially viable solar cells, said the researchers, and prove more affordable than current fabrication methods, which rely on the time-consuming process of molecular synthesis.
The research team’s next challenge is to develop a method of harvesting the solar charges created by their new nanomaterials. Currently, they are working to design a rylene molecule that can accept the electron from the DPP molecule after the singlet fission process. If successful, these materials would both initiate the singlet fission process and facilitate charge-transfer into a solar cell.
About the Advanced Science Research Center
The ASRC at The Graduate Center elevates scientific research and education at CUNY and beyond through initiatives in five distinctive, but increasingly interconnected disciplines: environmental sciences, nanoscience, neuroscience, photonics, and structural biology. The ASRC promotes a collaborative, interdisciplinary research culture with renowned researchers from each of the initiatives working side-by-side in the ASRC’s core facilities, sharing equipment that is among the most advanced available.
About The Graduate Center of The City University of New York
The Graduate Center of The City University of New York (CUNY) is a leader in public graduate education devoted to enhancing the public good through pioneering research, serious learning, and reasoned debate. The Graduate Center offers ambitious students more than 40 doctoral and master’s programs of the highest caliber, taught by top faculty from throughout CUNY — the nation’s largest public urban university. Through its nearly 40 centers, institutes, and initiatives, including its Advanced Science Research Center (ASRC), The Graduate Center influences public policy and discourse and shapes innovation. The Graduate Center’s extensive public programs make it a home for culture and conversation.
Suggested Items
LQDX Divests Aluminum Soldering Business - Mina™ - to Taiyo America Inc.
05/02/2024 | PRNewswireLQDX, formerly known as Averatek Corp., developer of high-performance materials for advanced semiconductor manufacturing, today announced that it has divested its aluminum soldering business – known as MinaTM – to Taiyo America Inc., a global market leader in advanced electronic materials.
Indium Corporation Expert to Present on Pb-Free Solder for Die-Attach in Discrete Power Applications
04/30/2024 | Indium CorporationIndium Corporation Product Manager – Semiconductor Dean Payne will present at the Advanced Packaging for Power Electronics conference, hosted by IMAPS, held May 8-9 in Woburn, Massachusetts, USA.
Real Time with... IPC APEX EXPO 2024: Adhesive Materials and Equipment Update with Dymax
05/01/2024 | Real Time with...IPC APEX EXPOVirginia Hogan, global business development manager at Dymax, discusses adhesive materials, dispensing and curing equipment, a new, high-reliability conformal coating, and various materials and dispensing methods.
Real Time with... IPC APEX EXPO 2024: Sustainability in the Industry
04/26/2024 | Real Time with...IPC APEX EXPOGuest Editor Henry Crandall and Chris Nash of Indium Corporation discuss the company's 90th anniversary and its focus on sustainability. They focus on the benefits of sustainable materials, their compatibility, and value propositions. The conversation also highlights how Durafuse LT technology's role in reducing reflow temperatures is leading to significant cost and energy savings. Nash also touches on downstream sustainability efforts such as using recycled materials for packaging.
SMC Korea 2024 to Highlight Semiconductor Materials Trends and Innovations on Industry’s Path to $1 Trillion
04/24/2024 | SEMIWith Korea a major consumer of semiconductor materials and advanced materials a key driver of innovation on the industry’s path to $1 trillion, industry leaders and experts will gather at SMC (Strategic Materials Conference) Korea 2024 on May 29 at the Suwon Convention Center in Gyeonggi-do, South Korea to provide insights into the latest materials developments and trends. Registration is open.