Optimizing the Energy Production of Photovoltaic Panels Using Artificial Intelligence
March 25, 2019 | Universidad Politécnica de MadridEstimated reading time: 2 minutes
Researchers from Universidad Politécnica de Madrid and the Spanish National Research Council have developed a method based on artificial intelligence techniques that consider the atmospheric variations when designing the solar cells to produce more energy.
By using a statistical technique and artificial intelligence, which is known as clustering, researchers from Solar Energy Institute at Universidad Politécnica de Madrid (IES - UPM) and from Institute of Micro and Nanotechnology at Spanish National Research Council (IMN-CSIC) have found a practical way to include in their calculations all the changes given in the solar spectrum to predict the production of photovoltaic solar energy.
The study, published in Nature Communications, allows us to find, in a few hours of calculating, the optimal design of multi-junction solar cells for each location.
Throughout the day and the seasons of the year, the sun position and the atmospheric conditions change and thus the sunlight that reaches the photovoltaic panels have different characteristics. The most relevant change occurs in the spectral content of light which consists in the distribution of colors of light. For example, the light is bluer at midday and redder in the afternoon.
The future solar panels will be multi-junction and combine various materials to take advantage of the light spectrum. However, the production of energy of multi-junction panels depends to some extent on the color change of the sunlight.
For this reason, these panels are manufactured to produce the maximum energy for a certain color of the sunlight, and thus the changes produced by the sun position and the atmospheric conditions cause production losses. In order to reduce these losses, researchers have designed a panel with an optimal production of global energy that it solves the problem of the sunlight colors. However, due to the infinite variety of atmospheric conditions combined with the diverse sun positions, this optimization is very complex.
The work carried out by the Spanish researchers has shown that data sets with thousands of solar spectra can be reduced to a few characteristic proxy spectra using machine learning techniques, and successfully use these proxy spectra to predict the yearly averaged efficiency as a function of the solar cell design.
Iván García Vara (IES - UPM) came up with the initial idea during his stay in the National Renewable Energy Laboratory. He developed a statistical method to conduct this type of calculation. Later, Jose María Ripalda Cobián y Jeronimo Buencuerpo Fariña (IMN - CSIC) applied the clustering technique to the previous method to achieve a successful result. Iván García Vara points out, “The final result of our work project was the optimization of the design of multi-junction solar panels using the yearly energy production as a criterion.”
Suggested Items
Sypris Receives New Releases Under Electronic Warfare Program
05/03/2024 | Sypris Electronics LLCSypris Electronics, LLC, a subsidiary of Sypris Solutions, Inc., announced that it has recently received additional releases under a multi-year production contract that was first announced in 2022. The order, which provides for Sypris to begin deliveries in 2024, calls for the manufacture and test of electronic assemblies for an additional four systems to be supplied to a U.S. DOD contractor.
Gstar Announced the Strategic Move: Groundbreaking of Silicon Wafer Factory Construction in Indonesia
05/03/2024 | PRNewswireRecently, Gstar held a groundbreaking ceremony for its silicon rod and silicon wafer factory, marking the beginning of the rapid construction phase.
GPV’s Q1 2024 Interim Financial Report Shows Strong Navigation in Uncertain Times
05/01/2024 | GPVDanish-based GPV recorded an expected drop in sales to DKK 2.3 billion for the first quarter of 2024. The decline also affected the operating profit, which was DKK 155 million compared to DKK 179 million in the same quarter last year, although the EBITDA margin was maintained. In general, demand has been softer in 2024, but GPV continues to invest for the long-term and expects the trend to turn in the second half of 2024.
Europlacer Presents New Range of iineo SMT Placement Machines.
05/01/2024 | EuroplacerFor more than 15 years, the Europlacer iineo placement machines have made their mark on the SMT industry with unique features and unrivalled flexibility. Today, Europlacer announces the launch of the second generation iineo.
RTX's Raytheon Awards Contract to Spain's Sener for Missile Production Support
04/30/2024 | RTXRaytheon, an RTX business, has awarded Spanish supplier, Sener, a contract to develop and produce the electro-mechanical control section of the Patriot® GEM-T missile.