-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Design Rules Recipe: Solvability, Manufacturability, and Performance
June 6, 2019 | I-Connect007 Editorial TeamEstimated reading time: 2 minutes
One thing that we’ve noticed lately: Each designer seems to have his or her own way of using PCB design rules. There doesn’t seem to be much agreement about setting or using design rules.
So, in this true experts panel, Mike Creeden of San Diego PCB joined Freedom CAD’s Scott McCurdy, Jay Carbone, and Rich Kluever to share their views on PCB design rules. This wide-ranging discussion with Andy Shaughnessy, Nolan Johnson, Barry Matties and Happy Holden covers everything from identifying the required constraints to setting electrical and manufacturing design rules and managing these often disparate requirements.
Andy Shaughnessy: Welcome, gentlemen. The topic of design rules keeps popping up, and there’s not much agreement about best practices. Or is there? Mike, can you talk about how you go about setting up design rules?
Mike Creeden: Design rules help us utilize the strength of our CAD tool to make the circuit do what we want it to do, and that occurs in three areas. I always talk about what I call the “designer’s triangle,” which are three perspectives when we look at the layout.
The first perspective would be the layout solvability. You have to solve the layout, and your design rules enable you to do that. I’m able to pin-escape from fine-pitch parts, and at the same time, I want to balance that with DFX or DFM. Second, physically speaking, I must address the concerns for the manufacturing process and capabilities of my supply chain. I want to optimize them because the more robust I can make it, the higher producibility and reliability I would have long term and in a production volume. Third, the other perspective is performance. Performance is many things, including signal integrity, power delivery, thermal, etc., and all those things have to be met.
We don’t want to over-constrain anything. And you cannot do one or two of those perspectives I just mentioned and ignore the other one. When we apply our design rules, there might be an EE as well as a layout person—sometimes, that is the same person—and then there’s also design rules from the manufacturing supply chain. They may be different than the physical layout rules to pin escape. All design rules should be added as early on in the layout cycle as possible. Then, it’s correct by construction.
Shaughnessy: Scott, can you take us through your process?
Scott McCurdy: I approach the design industry coming from my background of running a PCB fabrication company, where half the things that came to us had to be put on hold because something was wrong in the design. Sometimes, there was just no adult supervision at the other end. At Freedom CAD, we are a PCB design service bureau and create hundreds of designs each year, so I’m also including Jay Carbone, one of our top designers who lives for this stuff and is one of our better “interactors” with engineers, in this conversation. We deal with a lot of different personalities and skill levels. I also brought Rich Kluever, who was at Solectron for many years at the CM level running Valor, identifying design problems at the factory that was going to have to assemble this stuff. Rich has tried to bake into our process and people more of a manufacturing perspective because every one of our designs goes through Valor twice.
To read this entire interview, which appeared in the May 2019 issue of Design007 Magazine, click here.
Suggested Items
iNEMI Names Grace O'Malley CTO
05/02/2024 | iNEMIThe Board of Directors of the International Electronics Manufacturing Initiative (iNEMI) has named Grace O'Malley Chief Technical Officer (CTO).
Intel Takes Next Step Toward Building Scalable Silicon-Based Quantum Processors
05/02/2024 | BUSINESS WIRENature published an Intel research paper, “Probing single electrons across 300-mm spin qubit wafers,” demonstrating state-of-the-art uniformity, fidelity and measurement statistics of spin qubits.
ZESTRON Academy Launches 2024 Advanced Packaging & Power Electronics Webinar Series
05/01/2024 | ZESTRONZESTRON, the leading global provider of high-precision cleaning products, services, and training solutions in the electronics manufacturing and semiconductor industries, proudly announces the launch of its highly anticipated webinar series on Advanced Packaging & Power Electronics, a webinar series on the latest innovations, cleaning, and corrosion challenges.
NextFlex Convenes the Hybrid Electronics Community at Binghamton University
05/01/2024 | NextFlexBinghamton University hosted the NextFlex hybrid electronics community on April 18 for a day of expert presentations, breakout sessions on technology and manufacturing topics, and networking.
HQ NextPCB of HQ Electronics Debut on the International Stage for Electronics Manufacture at IPC APEX 2024
05/01/2024 | PRNewswireHQ NextPCB of HQ Electronics, a leading Chinese-based multilayer PCB manufacturer and assembly house showcased its industrial prowess on the international stage for the first time at the IPC APEX Expo 2024.