-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Why Designers Need to Be at the SMTA Additive Electronics Conference
October 18, 2019 | I-Connect007Estimated reading time: 2 minutes
In a recent interview, Kelly Dack and Tara Dunn (Omni PCB president and conference co-chair) discussed why designers need to attend the SMTA Additive Electronics Conference. Tara will also be attending and moderating a panel discussion at the conference.
Kelly Dack: From a design standpoint, can we expect to get answers for the application of these circuits and what to watch out for? As a designer, I’m very familiar with the rolled annealed copper that’s commonly used in flexible circuits. But I have a feeling that additive copper is not going to end up as rolled annealed and instead will be a crystalline structure. Are there mechanical ramifications to this? Will the conductive paths be more brittle and delicate?
Tara Dunn: The keynote presentation by Rich Brooks, senior engineering manager at Jabil Circuit Inc., will include some of the additive applications that they have been involved with over the recent years.
Dack: At first, additive processing was often perceived as something mainly for HDI and the super high-tech end. But it sounds like it’s being used for all sorts of applications—not just for the cutting edge.
Dunn: It definitely has a role with HDI technology. It can help solve a couple of things, such as working with a 12-layered design with three lamination cycles; that’s expensive because each of those lamination cycles comes with yield loss at extra costs. And it also hurts the lead time when you need to expedite product, so that’s a challenge and a constraint. Instead, if you can bring in this additive process, or a semi-additive process, and replace specific layers in a stackup, it doesn’t have to be the entire circuit done that way; you can have some layers be with the additive process, with some being etched when they have larger features, and then you can integrate those together.
In one customer application, we went from 12 layers to eight layers, which cut the lamination cycles from three to one; that’s a significant change in the way that we look at designs and how we can process things. Beyond HDI, I also see single-sided or double-sided circuit applications benefiting from these very fine feature sizes. If you think of something like a neuro-probe application or something that’s going to be bonded to the tip of a catheter, you’ll realize that additive has new applications on its own and independent of HDI.
To read the full interview, click here.
Don’t miss out; start your research. Attend the SMTA Additive Electronics Conference on October 24, 2019, to launch your expertise in additive electronics.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/03/2024 | Nolan Johnson, I-Connect007This week’s most important news is strategic—and telling. When one puts together the IPC industry reports, we simply have to include the recent conversation with Shawn DuBravac and Tom Kastner. On the design side, check out the latest “On The Line With…” podcast featuring Brad Griffin from Cadence Design Systems, discussing SI and PI in the realm of intelligent system design.
IMI Welcomes New CEO
05/03/2024 | IMIIntegrated Micro-Electronics, Inc. (IMI),The IMI Board of Directors announced, in a disclosure dated April 25, 2024, the appointment of Louis Sylvester Hughes, Chief Executive Officer (CEO).
Electronics Industry Sentiment Rose in April, Hitting New High
05/02/2024 | IPCApril 2024 marked the third consecutive month of sentiment growth among electronics manufacturers. When asked if they expected labor costs for hourly workers to rise over the next month, manufacturers in the United States, Mexico, and Europe predicted a five percent increase, while manufacturers in Asia predicted a slightly lower four percent increase.
iNEMI Names Grace O'Malley CTO
05/02/2024 | iNEMIThe Board of Directors of the International Electronics Manufacturing Initiative (iNEMI) has named Grace O'Malley Chief Technical Officer (CTO).
ZESTRON Academy Launches 2024 Advanced Packaging & Power Electronics Webinar Series
05/01/2024 | ZESTRONZESTRON, the leading global provider of high-precision cleaning products, services, and training solutions in the electronics manufacturing and semiconductor industries, proudly announces the launch of its highly anticipated webinar series on Advanced Packaging & Power Electronics, a webinar series on the latest innovations, cleaning, and corrosion challenges.