The Marketing Minute: Staying Positive When the Market Isn’t
Marcy’s Musings: Continuing to Invent the Future With SEL
It’s Only Common Sense: Why Failure Is an Opportunity for Growth
Flex Standards Update With Nick Koop
November 21, 2019 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 1 minute
This month, I interviewed Nick Koop—director of flex technology at TTM Technologies, a veteran “flex guy” and instructor, and a leader of several IPC flex standards committees. Nick provides an update for the committees he’s involved with and discusses some of the challenges that he sees as more designers enter the world of flex.
Andy Shaughnessy: Nick, tell us a little about your background and your work with flex and rigid-flex circuits at TTM.
Nick Koop: I’ve worked in the flex and rigid-flex world since 1985 where my roles have ranged from process engineer to design engineer to general manager of a factory. And I’ve been with TTM since 2013. It has been a great experience working with such a wide range of customers and programs, solving problems that lead to success for our customers.
Shaughnessy: You’re the vice-chair of the Flexible Circuits Committee and co-chair of the 6013 Subcommittee. Give us some updates on the flex committees.
Koop: All of the flex specifications are being reviewed on an ongoing basis. We are close to releasing new versions of IPC-2223 and IPC-6013. They will include more information on microvias, finished copper thickness, and other member-requested updates. I would expect that to happen by early 2020. The supporting material specifications and test methods are also under review. In addition, there is work happening on the T-50 Terms and Definitions Guideline, which is in the middle of a substantial update. So, there is a lot happening on all fronts.
Shaughnessy: We talk to a lot of rigid board designers who are being forced into flex design. Usually, they start with flex standards, and then hopefully, they will call a flex board shop. What advice would you give any rigid folks moving into the flex world?
Koop: We are also seeing dramatic growth in flex use driven by several factors; space, weight, reliability, and cost being some of the most common. Flex provides a lot of advantages over a rigid board and discrete wiring. My initial advice would be to gain an understanding of the similarities and differences. The key differences are unique materials and a variation in material movement, which can impact alignment.
To read this entire interview, which appeared in Flex007 in the September 2019 issue of Design007 Magazine, click here.
Share on:
Testimonial
"The I-Connect007 team is outstanding—kind, responsive, and a true marketing partner. Their design team created fresh, eye-catching ads, and their editorial support polished our content to let our brand shine. Thank you all! "
Sweeney Ng - CEE PCBSuggested Items
How Good Design Enables Sustainable PCBs
08/21/2025 | Gerry Partida, Summit InterconnectSustainability has become a key focus for PCB companies seeking to reduce waste, conserve energy, and optimize resources. While many discussions on sustainability center around materials or energy-efficient processes, PCB design is an often overlooked factor that lies at the heart of manufacturing. Good design practices, especially those based on established IPC standards, play a central role in enabling sustainable PCB production. By ensuring designs are manufacturable and reliable, engineers can significantly reduce the environmental impact of their products.
50% Copper Tariffs, 100% Chip Uncertainty, and a Truce
08/19/2025 | Andy Shaughnessy, I-Connect007If you’re like me, tariffs were not on your radar screen until a few months ago, but now political rhetoric has turned to presidential action. Tariffs are front-page news with major developments coming directly from the Oval Office. These are not typical times. President Donald Trump campaigned on tariff reform, and he’s now busy revamping America’s tariff policy.
Global PCB Connections: Understanding the General Fabrication Process—A Designer’s Hidden Advantage
08/14/2025 | Markus Voeltz -- Column: Global PCB ConnectionsDesigners don’t need to become fabricators, but understanding the basics of PCB fabrication can save you time, money, and frustration. The more you understand what’s happening on the shop floor, the better you’ll be able to prevent downstream issues. As you move into more advanced designs like HDI, flex circuits, stacked vias, and embedded components, this foundational knowledge becomes even more critical. Remember: the fabricator is your partner.
MKS’ Atotech to Participate in IPCA Electronics Expo 2025
08/11/2025 | AtotechMKS Inc., a global provider of enabling technologies that transform our world, announced that its strategic brands ESI® (laser systems) and Atotech® (process chemicals, equipment, software, and services) will showcase their latest range of leading manufacturing solutions for printed circuit board (PCB) and package substrate manufacturing at the upcoming 17th IPCA Show to be held at Pragati Maidan, New Delhi from August 21-23, 2025.
MKS Showcases Next-generation PCB Manufacturing Solutions at the Thailand Electronics Circuit Asia 2025
08/06/2025 | MKS Instruments, Inc.MKS Inc, a global provider of enabling technologies that transform our world, today announced its participation in Thailand Electronics Circuit Asia 2025 (THECA 2025), taking place August 20–22 at BITEC in Bangkok.