Dan’s Biz Bookshelf: ‘Costovation: Innovation That Gives Your Customers Exactly What They Want—And Nothing More’
The Right Approach: ‘Twas the Night Before Christmas (Harley-style)
It’s Only Common Sense: Dear Santa, Here’s My Sales Wish List
Ventec Invests in Key Equipment to Support Expansion of PTFE Laminates Manufacturing
December 16, 2019 | Ventec International GroupEstimated reading time: 2 minutes
Ventec International Group Co., Ltd. has significantly increased its PTFE laminate manufacturing capabilities following a strategic investment in a new state-of-the-art high-temperature press and lay-up/break-down line at its Suzhou (China) manufacturing plant.
With 5G and evermore sophisticated radar applications, the demand and requirements for low loss/high frequency material is accelerating. Critical RF/Microwave-, antenna-, power amplifier- and sub-assembly-applications require superior electrical performance that can be delivered through PTFE laminates. To serve the increasing demand of these PTFE type products, Ventec has strengthened its investment in its Suzhou manufacturing plant to be even better positioned for the increase in demand and meet customers accelerated radar and 5G deployment requirements.
The most recent important equipment investment in a new state-of-the-art high-temperature press and lay-up/break-down line at Ventec’s Suzhou (China) manufacturing plant delivers a significant increase in manufacturing capacity to meet the growing demand for PTFE laminates. This includes the launch and roll-out of tec-speed 30.0 - Ventec’s latest ceramic filled high-speed/high-frequency PTFE material range that offers the highest signal-integrity characteristics for the most advanced high-frequency systems such as 77~79 GHz automotive radar systems.
tec-speed 30.0 (VT-3703) offers:
- Dk 3.0 with extremely low Df (0.0009)
- DK-stability versus temperature
- Lower in-plane thermal expansion
The current Dk 3.0 tec-speed 30.0 version will be supplemented by Dk 6.15 and Dk 10.2 versions in the first half of 2020, offering an even wider range of options for applications such as automotive radar, cellular base stations, power amplifiers & antennas, global positioning satellite antennas, patch antennas for wireless communication or power backplanes.
Jason Chung, CEO said: "The investment and installation of the PTFE manufacturing line is yet another important piece of the puzzle in our global growth program. The addition of the line to our range of capabilities demonstrates to our customers our commitment to maintaining the most up-to-date manufacturing technologies that support our clients’ PCB design, development and manufacturing needs."
For more information about Ventec's solutions and the company’s wide variety of products, please visit www.venteclaminates.com.
About Ventec International Group
Ventec International Group Co., Ltd. (6672 TT) is a premier supplier to the Global PCB industry. With volume manufacturing facilities in Taiwan and China and distribution locations and manufacturing sites in both the US and Europe, Ventec specializes in advanced copper clad glass reinforced and metal backed substrates. Ventec materials, which include high-quality enhanced FR4, high-speed/low-loss- & high-performance IMS material technology and an advanced range of thermal management solutions, are manufactured by Ventec using strict quality-controlled processes that are certified to AS9100 Revision D, IATF 16949:2016 and ISO 9001:2015, and are backed by a fully controlled and managed global supply chain, sales- and technical support-network.
Share on:
Suggested Items
Global PCB Connections: Following DFM Rules Leads to Better Boards
12/18/2024 | Jerome Larez -- Column: Global PCB ConnectionsAs a PCB field applications engineer, ensuring smooth communication between PCB designers and fabricators is one of my frequent challenges. A critical part of that dialogue is design for manufacturing (DFM). Many designers, even experienced ones, often misunderstand or overlook important DFM considerations. They may confuse design rules with manufacturing minimums, leading to technically feasible designs that are difficult or costly to produce. In this column, I will clarify some common DFM guidelines and help designers understand the difference between “design rules” and “minimums” while sharing best practices that will simplify the production process and ensure the highest quality PCB.
Sayonara to the Last Standing Copper Foil Plant in North America
12/17/2024 | Marcy LaRont, I-Connect007In July 2021, PCB007 Magazine published an interview with Michael Coll and Chris Stevens of Nippon Denkai about the new acquisition by Nippon Denkai of the last-standing ED foil manufacturer in North America. The plant in Augusta, Georgia, was formerly owned by Oak Mitsui, Inc. and had been purchased by Nippon Denkai the previous March, after which significant investment was made with the expectation of providing more jobs.
SCHMID Group Unveils Enhanced InfinityLine H+ for Electroless Copper Deposition
12/16/2024 | SCHMID GroupThe SCHMID Group, a global leader in high-tech solutions for the electronics industry, proudly announces significant updates to its flagship InfinityLine H+ Electroless Cu system. Specifically designed for the production of high- performance advanced packaging applications using mSAP and SAP processes, the system reflects SCHMID’s expertise in horizontal electroless copper deposition.
OKI Develops PCB Technology with Stepped Copper Coin Insertion to Achieve 55 Times Better Heat Dissipation in Outer Space
12/12/2024 | BUSINESS WIREThe OKI Group printed circuit board (PCB) business company OKI Circuit Technology has successfully developed multilayer PCB technology with stepped copper coin insertion to achieve 55 times better heat dissipation compared to conventional PCB. The stepped copper coin is offered in two types, circular and rectangular, to suit the shape of the electronic component mounted on the PCB. OTC is working to develop mass-production technologies with the aim of introducing PCBs incorporating this new technology into markets for compact devices or devices used in outer space or other environments where air cooling technology cannot be used.
Fresh PCB Concepts: PCB Plating Process Overview
12/12/2024 | Team NCAB -- Column: Fresh PCB ConceptsIn this installment of Fresh PCB Concepts, Mike Marshall takes the helm stating: PCBs have been the platform for the interconnection of electronic components for decades. Because of process costs and other constraints, such as mechanical properties or size limitations of the alternatives, PCBs will remain the standard low-cost interconnection technology. Rapidly increasing performance and functionality requirements of wireless and high-speed devices have challenged the development and implementation of new manufacturing solutions.