It’s Only Common Sense: Marketing Isn’t Fluff, It’s Ammunition
Driving Innovation: Mechanical and Optical Processes During Rigid-flex Production
The Chemical Connection: Onshoring PCB Production—Daunting but Certainly Possible
Ventec Launches High-Speed Material Option Cladded with Thin-Film Resistor Foil
September 24, 2020 | Ventec International GroupEstimated reading time: 2 minutes
For enhanced high-speed signal-handling performance required by the world's most demanding high-frequency Printed Circuit Board applications, Ventec International Group has launched a laminate option to its tec-speed 20.0 glass-reinforced hydrocarbon and ceramic laminate cladded with thin-film resistor material from Ticer.
Ventec's tec-speed 20.0 material, which combines unrivaled high-frequency performance (Dk 3.00-3.48 / Df 0.0027-0.0037), superior loss characteristics and highest reliability, is now available cladded with Ticer TCR© NiCr thin-film resistor foil as a service option. Essentially being inductor-free, the addition of the resistive material technology offers an enhanced material solution for some of today’s high-speed, low-loss, high-frequency applications where absolute performance and reliability are essential. These include aerospace & defense, radar, control circuits, sensor technologies, wireless communications, MEMS microphones/sensors/motors and medical diagnostic type applications.
Driven by the demand for reduction of dimensions and manufacturing costs of these types of devices, multi-layer technologies are one of the solutions that offer an increase in component packaging density. By adding the resistive foil layer in between the substrate and the copper layer, resistors can be embedded inside of PCBs after the lamination process.
Consequently, additional efficiencies the shorter distance between the embedded passives and active components achieves additional efficiencies that result in better signal transmission, less cross talk and improved electrical signal performance at high frequencies through lower loss and noise. In addition, material cost reduction, yield improvement, defect reduction and ultimately an optimized production cycle time and time to market can be achieved.
The embedded resistor foil layer material option named tec-speed 20.0 VT-870 H348 TCR is available in Hoz and 1oz thick foil with resistivity values of 25, 50 and 100 ?/sq.
“The high-speed signal-handling performance of our latest VT-870 H348 TCR material cladded with Ticers’ unique technology provides additional efficiencies for Ventec’s tec-speed 20.0 material,” noted Mark Goodwin, COO Europe & America. “It allows us to offer our customers an even greater choice of the best in high-quality, high-performance and reliable base material technology – all of course supported by our fast and efficient global delivery promise through our fully controlled global supply chain and dependable technical support.”
About Ventec International Group
Ventec International Group Co., Ltd. (6672 TT) is a world leader in the production of polyimide & high reliability epoxy laminates and prepregs and specialist provider of thermal management and IMS solutions. Further information about Ventec’s solutions and the company’s wide variety of products is available at www.venteclaminates.com and/or by downloading the Ventec APP.
Share on:
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
WestDev Announces Advanced Thermal Analysis Integration for Pulsonix PCB Design Suite
10/29/2025 | WestDev Ltd.Pulsonix, the industry-leading PCB design software from WestDev Ltd., announced a major enhancement to its design ecosystem: a direct interface between Pulsonix and ADAM Research's TRM (Thermal Risk Management) analysis software.
Designers Notebook: Power and Ground Distribution Basics
10/29/2025 | Vern Solberg -- Column: Designer's NotebookThe principal objectives to be established during the planning stage are to define the interrelationship between all component elements and confirm that there is sufficient surface area for placement, the space needed to ensure efficient circuit interconnect, and to accommodate adequate power and ground distribution.
Episode 6 of Ultra HDI Podcast Series Explores Copper-filled Microvias in Advanced PCB Design and Fabrication
10/15/2025 | I-Connect007I-Connect007 has released Episode 6 of its acclaimed On the Line with... American Standard Circuits: Ultra High Density Interconnect (UHDI) podcast series. In this episode, “Copper Filling of Vias,” host Nolan Johnson once again welcomes John Johnson, Director of Quality and Advanced Technology at American Standard Circuits, for a deep dive into the pros and cons of copper plating microvias—from both the fabricator’s and designer’s perspectives.
Nolan’s Notes: Tariffs, Technologies, and Optimization
10/01/2025 | Nolan Johnson -- Column: Nolan's NotesLast month, SMT007 Magazine spotlighted India, and boy, did we pick a good time to do so. Tariff and trade news involving India was breaking like a storm surge. The U.S. tariffs shifted India from one of the most favorable trade agreements to the least favorable. Electronics continue to be exempt for the time being, but lest you think that we’re free and clear because we manufacture electronics, steel and aluminum are specifically called out at the 50% tariff levels.
MacDermid Alpha & Graphic PLC Lead UK’s First Horizontal Electroless Copper Installation
09/30/2025 | MacDermid Alpha & Graphic PLCMacDermid Alpha Electronics Solutions, a leading supplier of integrated materials and chemistries to the electronics industry, is proud to support Graphic PLC, a Somacis company, with the installation of the first horizontal electroless copper metallization process in the UK.