-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueThe Rise of Data
Analytics is a given in this industry, but the threshold is changing. If you think you're too small to invest in analytics, you may need to reconsider. So how do you do analytics better? What are the new tools, and how do you get started?
Counterfeit Concerns
The distribution of counterfeit parts has become much more sophisticated in the past decade, and there's no reason to believe that trend is going to be stopping any time soon. What might crop up in the near future?
Solder Printing
In this issue, we turn a discerning eye to solder paste printing. As apertures shrink, and the requirement for multiple thicknesses of paste on the same board becomes more commonplace, consistently and accurately applying paste becomes ever more challenging.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - smt007 Magazine
My Experience at SMTAI 2020 Virtual
October 6, 2020 | Denny Fritz, Fritz ConsultingEstimated reading time: 3 minutes
I compliment SMTA on organizing and operating the virtual SMTAI trade show this week. Please understand that I am retired but active with IPC and I-Connect007, so I did not shell out $295 to attend the technical sessions. However, I hope I can pick off a few of the interesting papers with my SMTA membership later on. Therefore, I concentrated on the exhibition portion of the virtual show.
The SMTA orientation session to prepare for SMTAI was well done and provided some good information about what I would encounter. I am sure it helped that this was at least the third show that had gone virtual in the last two months. I’m guessing contracting a professional organization to format a virtual show was very helpful for the SMTA staff members. I presume SMTA engaged a web-based show software company, as the format was similar to what I have seen used previously.
In the exhibition hall, the featured sponsors were prominently displayed, as expected. The list of exhibitors was easy to follow. I did not use the product locator, as I was familiar with the products of two-thirds of the exhibitors. This would have been my 15th successive SMTA show if it had been live. I did drop in on about five companies that I was not familiar with, and it was easy to see what they were promoting. Using clips already on their webpage, I hope the creation of each exhibitor’s show exhibit was easy to make. I really appreciated companies that made a “show special” effort to demonstrate how they are on top of their game. The poorest exhibits only contained links to exhibitor pre-recordings already on their web page. Their webpage was their exhibit, which is money poorly spent, in my opinion.
Some of the exhibitors seemed to have prepared their booth duty pretty carefully and did a decent job of having named people available when their exhibit said they would be online. That allowed me to have at least two “remember when” chats with old friends, just like a live show. I had several in-depth technical exchanges with booth personnel, and mostly got the information I needed.
I understand that booth personnel were working from their regular or home offices, but a couple of times, I could not connect to someone who was listed on duty. I don’t think booth duty was taken as seriously as a live show. As an attendee, I was unsure if my chats were private, or if others dropping into the booth could see what I had said. On the third day, I figured out how to use private chats.
In addition to the exhibition, I viewed the well-done interviews with the SMTA 2020 award winners. It also seemed like the free events were oriented to newbies and groups I was not interested in. I guess I am to the age where I would gladly tune in to an event called something like “Thanks for the Memories.”
I would recommend the virtual booths to regular SMTAI exhibitors, as many companies were conspicuous by their absence. Services companies were much better represented than equipment companies. While let’s hope that we do not have another 2020, based on other conferences and trade shows over the last six months, I think that some exhibition formats will never go back to totally live.
Here are a few of my final comments:
- The video vault was interesting, as all exhibitors posted their links in one place.
- I did not use the briefcase feature, but could still contact the exhibitor for the information.
- I did not understand the leaderboard for prize points for visiting booths or making inquiries to the top three scorers. I followed my regular routine and accumulated over 10,000 points, which was enough for 24th place at one time. However, I am not sure how a couple of people scored 20 times as many points as I did; they must have scored every possible booth and video, as well as downloading all available literature.
Overall, I enjoyed my time at the SMTAI virtual trade show and would do it all over again.
Suggested Items
IPC Hall of Fame Spotlight Series: Highlighting Patty Goldman
11/22/2024 | Dan Feinberg, I-Connect007In my first article of this special series, I wrote a synopsis of the IPC Raymond E. Pritchard Hall of Fame (HOF) Award, along with a commentary on its first few members, particularly Pritchard. Over the years, IPC members who have contributed significantly to IPC and our industry have been awarded this high honor and recognition. Though many early HOF members have passed away and are unknown to today’s IPC membership, their contributions still resonate. Over the coming months, I look forward to researching and reporting on IPC Hall of Fame members and their contributions. This month, I highlight Patty Goldman.
Winners of IPC Hand Soldering World Championship at electronica 2024 Announced
11/21/2024 | IPCIPC hosted its Hand Soldering World Championship in Munich, Germany, at electronica on 14-15 November 2024, welcoming 14 competitors from 13 companies and 12 countries worldwide. Skilled contestants competed to build an electronics assembly in accordance with IPC-A-610 Class 3 criteria, and were judged on the functionality of the assembly, compliance with the assembly process and overall product quality. The contestants were allowed a maximum of 60 minutes to complete the assembly.
IPC Issues Clarion Call for EU to Reclaim Leadership in Electronics Manufacturing
11/21/2024 | IPCIPC released a synopsis of its recent white paper, Securing the European Union’s Electronics Ecosystem. This condensed document presents a comprehensive overview of the current challenges in Europe’s electronics manufacturing industry and shares actionable steps to help the EU achieve a stronger, more autonomous ecosystem.
Enjoy the Journey: PCB Design Instructor Kris Moyer on His Sustainable Lifestyle
11/19/2024 | Michelle Te, IPC CommunityWhen I contacted IPC design instructor Kris Moyer to discuss his sustainable lifestyle, he responded to my text with a call. "I'm calling you from about 8,000 feet, sitting at the foot of Mammoth Lakes," he told me. “My friends and I are about to get in the pool for the afternoon." Kris can do this because he actually lives full-time in his travel-trailer at this campground. He's now a permanent camper, taking him anywhere the winds blow—and where there's strong internet service—so he can teach his PCB design classes, offer expert interviews, and live off the land.
IPC Celebrates National Apprenticeship Week with a Focus on Electronics Manufacturing Excellence
11/19/2024 | IPCIPC, a leading global electronics industry association and source for industry standards, training and advocacy, is proud to announce its participation in National Apprenticeship Week, scheduled for November 17-23, 2024.