Knocking Down the Bone Pile: Revamp Your Components with BGA Reballing
Global Sourcing Spotlight: Balancing Speed and Flexibility Without Sacrificing Control
SMT Perspectives & Prospects: Artificial Intelligence Part 6: Data Module 1
Peters’ ELPEGUARD Gel Receives UL Approval
May 3, 2021 | PetersEstimated reading time: 1 minute
The Peters ELPEGUARD gel EH 13.401 FLZ-UV-HT has received Underwriters Laboratories (UL) approval. This means that the Peters gel for dam-and-fill applications has undergone and passed the flammability test in horizontal burning.
Defining parameters for the flammability of plastics for parts in equipment and applications in the presence of an open flame using a Bunsen burner, the UL94 standard certifies that the Peters ink system meets the requested fire protection classification.
"These are the strict eyes of the globally recognised and independent U.S. organisation that examines products, components and systems with regard to their safety and certifies them with a Yellow Card if they pass the test," reports Stefan Schröder, product manager for conformal coatings at Peters.
"Dam-and-fill" applications help protect highly complex areas within an assembly, achieved through the application of a barrier which is then sealed by a flowable material. Dam structures can be applied, for example, around connector strips, components and contact surfaces to prevent penetration or spreading of the subsequently applied conformal coating. Due to the smooth flow after application, components "legs" are completely enclosed.
The conformal coating ELPEGUARD SL 1307 FLZ-T gels of the EH 13.401 FLZ-UV series are available in practical cartridge filling or fillable for dispersing systems. These gels, which are available both in colourless-transparent and fluorescent versions, are thixotropic, solvent-free and purely UV-curing ink systems based on acrylate resins that can be applied with pinpoint accuracy. Perfect conformal coating for most difficult applications.
"Thixotropic means that the longer you stir the liquid, the thinner it becomes," explains Schröder. In the case of Peters inks this means that the thixotropic adjustment does not run—e.g., on a printed circuit board—and can therefore be used on critical plug connections and components with high capillary action, too.
The coating also provides reliable protection against contact, especially on solder pins. The highly elastic dam minimises the risk of cracks during temperature changes. UV curing takes place at approx. 4000 mJ/cm², which means that curing is complete, uniform and efficient, resulting in a brilliant and scratch-resistant surface. Visit www.peters.de
Share on:
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
Rehm Wins Mexico Technology Award for CondensoXLine with Formic Acid
10/17/2025 | Rehm Thermal SystemsModern electronics manufacturing requires technologies with high reliability. By using formic acid in convection, condensation, and contact soldering, Rehm Thermal Systems’ equipment ensures reliable, void-free solder joints — even when using flux-free solder pastes.
Indium Experts to Deliver Technical Presentations at SMTA International
10/14/2025 | Indium CorporationAs one of the leading materials providers to the power electronics assembly industry, Indium Corporation experts will share their technical insight on a wide range of innovative solder solutions at SMTA International (SMTAI), to be held October 19-23 in Rosemont, Illinois.
Knocking Down the Bone Pile: Revamp Your Components with BGA Reballing
10/14/2025 | Nash Bell -- Column: Knocking Down the Bone PileBall grid array (BGA) components evolved from pin grid array (PGA) devices, carrying over many of the same electrical benefits while introducing a more compact and efficient interconnect format. Instead of discrete leads, BGAs rely on solder balls on the underside of the package to connect to the PCB. In some advanced designs, solder balls are on both the PCB and the BGA package. In stacked configurations, such as package-on-package (PoP), these solder balls also interconnect multiple packages, enabling higher functionality in a smaller footprint.
Indium to Showcase High-Reliability Solder and Flux-Cored Wire Solutions at SMTA International
10/09/2025 | Indium CorporationAs one of the leading materials providers in the electronics industry, Indium Corporation® will feature its innovative, high-reliability solder and flux-cored wire products at SMTA International (SMTAI), to be held October 19-23 in Rosemont, Illinois.
‘Create your Connections’ – Rehm at productronica 2025 in Munich
10/08/2025 | Rehm Thermal SystemsThe electronics industry is undergoing dynamic transformation: smart production lines, sustainability, artificial intelligence, and sensor technologies dominate current discussions.