-
-
News
News Highlights
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Hole Truth: Via Integrity in an HDI World
From the drilled hole to registration across multiple sequential lamination cycles, to the quality of your copper plating, via reliability in an HDI world is becoming an ever-greater challenge. This month we look at “The Hole Truth,” from creating the “perfect” via to how you can assure via quality and reliability, the first time, every time.
In Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
- Articles
- Columns
- Links
- Media kit
||| MENU - pcb007 Magazine
IPC Survey Finds Many May Exit Defense Market Due to Cyber Certification Costs
June 24, 2021 | IPCEstimated reading time: 1 minute

John Mitchell, president and CEO of IPC, a global electronics manufacturing association, released the following statement in advance of the U.S. House Small Business Subcommittee on Oversight, Investigations, and Regulations hearing on the Department of Defense's (DOD) Cybersecurity Maturity Model Certification (CMMC):
"Cybersecurity is a must for U.S. national security, but the CMMC is an insurmountable hurdle for many small and medium-sized electronics manufacturers that do business with the Department of Defense. A recent IPC survey found CMMC may weaken the U.S. defense electronics industrial base even as it seeks to bolster the security of those that remain in it. The high costs and compliance burdens will push many companies out of the defense market unless DoD takes steps to support the industry's assessment and compliance. Even more worrisome, the risk to industrial base resiliency may be greater than currently realized as most companies are not fully aware of the heavy costs associated with CMMC compliance.
"IPC thanks Chairman Dean Phillips and Ranking Member Beth Van Duyne for carefully evaluating the impacts of CMMC on the small business community. We urge the DoD to continue its ongoing efforts to provide the DoD supply chain greater clarity, support, and opportunity to leverage existing standards to help reduce the costs and burdens of CMMC compliance."
On June 8, IPC released an industry survey and report, which found that one-quarter (24 percent) of electronic manufacturers say the costs and burdens of compliance with CMMC may force them out of the DoD supply chain. The survey also found that 33 percent of respondents said the CMMC would weaken the U.S. defense electronics industrial base, while 18 percent were unsure, highlighting the uncertainties involved. And 41 percent believe applying the CMMC clause to their suppliers will create other problems in the supply chain.
Most suppliers expect and are willing to spend upwards of $50,000 on CMMC readiness, and nearly one-third (32 percent) report that it will take them one to two years to prepare to undergo CMMC assessment. However, more than half of the suppliers say implementation costs of more than $100,000 would make CMMC readiness too expensive. DoD's own cost analysis estimated the cost of a CMMC Maturity Level 3 (ML3) certification to be more than $118,000 in the first year. This means DoD's own estimate of CMMC compliance costs is too high for 77 percent of the IPC survey respondents.
Suggested Items
The Global Electronics Association Releases IPC-8911: First-Ever Conductive Yarn Standard for E-Textile Application
07/02/2025 | Global Electronics AssociationThe Global Electronics Association announces the release of IPC-8911, Requirements for Conductive Yarns for E-Textiles Applications. This first-of-its-kind global standard establishes a clear framework for classifying, designating, and qualifying conductive yarns—helping to address longstanding challenges in supply chain communication, product testing, and material selection within the growing e-textiles industry.
IPC-CFX, 2.0: How to Use the QPL Effectively
07/02/2025 | Chris Jorgensen, Global Electronics AssociationIn part one of this series, we discussed the new features in CFX Version 2.0 and their implications for improved inter-machine communication. But what about bringing this new functionality to the shop floor? The IPC-CFX-2591 QPL is a powerful technical resource for manufacturers seeking CFX-enabled equipment. The Qualified Product List (QPL) helps streamline equipment selection by listing models verified for CFX compliance through a robust third-party virtual qualification process.
Advancing Aerospace Excellence: Emerald’s Medford Team Earns Space Addendum Certification
06/30/2025 | Emerald TechnologiesWe’re thrilled to announce a major achievement from our Medford, Oregon facility. Andy Abrigo has officially earned her credentials as a Certified IPC Trainer (CIT) under the IPC J-STD-001 Space Addendum, the leading industry standard for space and military-grade electronics manufacturing.
Magnalytix and Foresite to Host Technical Webinar on SIR Testing and Functional Reliability
06/26/2025 | MAGNALYTIXMagnalytix, in collaboration with Foresite Inc., is pleased to announce an upcoming one-hour Webinar Workshop titled “Comparing SIR IPC B-52 to Umpire 41 Functional & SIR Test Method.” This session will be held on July 24, 2025, and is open to professionals in electronics manufacturing, reliability engineering, and process development seeking insights into new testing standards for climatic reliability.
IPC Rebrands as Global Electronics Association: Interview With Dr. John W. Mitchell
06/22/2025 | Marcy LaRont, I-Connect007Today, following a major announcement, IPC is embracing the rapid advancement of technology with a bold decision to change its name to the Global Electronics Association. This name more accurately reflects the full breadth of its work and the modern realities of electronics manufacturing. In this exclusive interview, Global Electronics Association President and CEO Dr. John W. Mitchell shares the story behind the rebrand: Why now, what it means for the industry, and how it aligns with the organization’s mission.