-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Essential Guide to Surface Finishes
We go back to basics this month with a recount of a little history, and look forward to addressing the many challenges that high density, high frequency, adhesion, SI, and corrosion concerns for harsh environments bring to the fore. We compare and contrast surface finishes by type and application, take a hard look at the many iterations of gold plating, and address palladium as a surface finish.
It's Show Time!
In this month’s issue of PCB007 Magazine we reimagine the possibilities featuring stories all about IPC APEX EXPO 2025—covering what to look forward to, and what you don’t want to miss.
Fueling the Workforce Pipeline
We take a hard look at fueling the workforce pipeline, specifically at the early introduction of manufacturing concepts and business to young people in this issue of PCB007 Magazine.
- Articles
Article Highlights
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
AT&S’ Growth Continues Unabated in Q1 21/22
September 29, 2021 | AT&SEstimated reading time: 2 minutes
AT&S recorded a very positive revenue development despite unfavourable negative currency effects in the first quarter of 2021/22.
“Digitalisation continues to drive the demand for our technologies. Markets that showed temporary weakness are increasingly recovering. Strategically, we are still fully on track. The production of IC substrates in particular is running at full speed. The implementation of the capacity expansion in Chongqing is making excellent progress. The first parts of the production equipment have already been qualified as well as be put into operation,” says CEO Andreas Gerstenmayer.
Consolidated revenue rose by 28% to € 317.7 million in the first quarter of 2021/22 (PY: € 247.9 million). Adjusted for currency effects, the increase in consolidated revenue even amounted to 37%. The additional capacity and growing demand for ABF substrates made a significant contribution to revenue growth. The development was supported by the broader application portfolio for mobile devices and the demand for printed circuit boards for modules. In the AIM segment, all three areas contributed to revenue growth. Although the Automotive segment nearly doubled its revenue after a very weak first quarter of the previous year, the shortage of semiconductors will continue.
EBITDA increased from € 39.5 million to € 46.3 million. The improvement in earnings is predominantly attributable to the increase in consolidated revenue. Currency fluctuations of the US dollar and the Chinese renminbi had a negative impact of € 18.1 million on the earnings development. In addition, temporary start-up costs for the IC substrate production in Chongqing were incurred. On the market side, a change in product mix in the Mobile Devices segment had a negative effect on profitability.
AT&S continues its efforts to make the company future-proof by intensifying investments in the organisation as well as in research and development. Investments of € 31.3 million were made during the reporting period (previous year: € 22.4 million) to prepare for future technologies and pursue the modularisation strategy, among other things. Adjusted for the start-up effects of the Chongqing project, EBITDA amounted to € 50.8 million.
The EBITDA margin amounted to 14.6% (adjusted EBITDA margin: 16.0%), falling short of the prior-year level of 15.9% (adjusted EBITDA margin: 16.5%). EBIT declined from € 0.2 million to € -0.4 million. The EBIT margin amounted to -0.1% (PY: 0.1%). Finance cost – net improved from € -5.9 million to € -3.1 million, which is primarily attributable to the positive change in exchange rate differences. Loss for the period improved by € 2.6 million from € -7.9 million to € -5.3 million, primarily due to the improvement in finance cost – net.
The financial position was characterised by an increase in non-current assets at the end of the reporting period. Total assets rose to € 2,515.7 million, up 5.3% on 31 March 2021 as a result of additions to assets and technology upgrades.
Equity declined by -0.4% compared with 31 March 2021 and amounted to € 798.6 million, which was primarily earnings-related. The equity ratio decreased by 1.8 percentage points to 31.7% and temporarily fell below the medium-term target of 40.0%. This is attributable in particular to the increase in total assets as a result of investments and securing the financing of the future investment programme.
Cash and cash equivalents rose to € 560.7 million (31 March 2021: € 552.9 million). In addition, AT&S has financial assets of € 16.2 million and unused credit lines of € 328.5 million to secure the financing of the future investment programme and short-term repayments.
Suggested Items
Real Time with... IPC APEX EXPO 2025: Insights into PCB Design and Manufacturing with Polar Instruments
04/03/2025 | Real Time with...IPC APEX EXPOErik Bateham discusses Polar's latest book, which enhances insights for PCB designers and manufacturers. The book, The Designer's Guide to... More Secrets of High-Speed PCBs, features a guest chapter on 2D via design modeling. Erik highlights the industry's shift towards UHDI and the challenges in measuring at micron levels.
Real Time with... IPC APEX EXPO 2025: Uyemura—Inside the Specialty Chemicals Market
04/03/2025 | Real Time with...IPC APEX EXPORich Depoto discusses Uyemura's focus on specialty chemicals and market trends, particularly the shift towards HDI and UHDI products. Rich highlights innovations in surface adhesion and micro etches for copper, essential for high-speed transmission.
CEE PCB Appoints Fred Hickman as Vice President of Sales, North America
04/03/2025 | CEE PCBTom Yang, CEO of CEE PCB, is pleased to announce the appointment of Fred E. Hickman III as Vice President of Sales for North America.
Real Time with... IPC APEX EXPO 2025: New Dispensing and Coating Solutions from Rehm
04/03/2025 | Real Time with...IPC APEX EXPOMichael Hanke, Global Sales Officer at Rehm, discusses new dispensing and coating equipment developed in Germany. He emphasizes the significance of software integration with customer systems to tackle market challenges.
Real Time with... IPC APEX EXPO 2025: Maximizing Cost Savings in PCB Design With NCAB
04/02/2025 | Real Time with...IPC APEX EXPOKelly Dack and Lonnie Port discuss NCAB's role in the printed circuit board industry. With 30 years of experience, NCAB emphasizes the importance of customer involvement during the design process to achieve significant cost reductions.