The Government Circuit: From Tax Policy to Tariffs, Denver to Delhi, Speaking Up for Electronics 
Global Sourcing Spotlight: Evaluating a Supplier’s Capabilities
Global Citizenship: Cultivating Cross-border Partnerships With Integrity
Book Excerpt: 'The Printed Circuit Assembler’s Guide to… Solder Defects'
June 7, 2022 | I-Connect007 Editorial TeamEstimated reading time: 1 minute
The Printed Circuit Assembler’s Guide to… Solder Defects—authored by the experts at Indium Corporation and exclusively available in the I-007eBook library—is specifically dedicated to educating the printed circuit board assembly sector and serves as a valuable resource for people seeking the most relevant information available. What follows is the introduction from this book.
Introduction:
In 2006, much of the world switched from tin-lead to lead-free solder. The European Union’s Restriction of Hazardous Substances (RoHS) directive, which essentially eliminated lead from electrical solder, drove this global move. This change has challenged circuit board assemblers since Pb-free solders melt at temperatures nearly 40°C hotter than lead-containing solders, and they do not flow or wet as well as SnPb solders.
At the same time, the density of electronics has unabatedly increased. This density increase has resulted in exponentially more powerful electronics—the fastest supercomputer of 1996 is outperformed by today’s iPhone 11 Pro—creating another challenge for assemblers. Whereas the 0402 passive was the leading edge in miniaturization in the SnPb era, the 0201, 01005, and smaller passives have emerged for Pb-free soldering. The combined challenges of Pb-free soldering and ever-increasing miniaturization have resulted in new or exacerbated defects in electronics assembly. This book was developed to address this problem, and will address the following defect topics:
- Voiding in SMT Assembly
- Graping
- Head-in-Pillow and Non-Wet Open Defects
- Tombstoning of Passive Components
- Solder Paste Insufficients
- Solder Balling and Beading
It is also important to recognize that effective electronics assembly is an optimization process—often, minimizing one defect will exacerbate another. So, in addition to the information presented here, when confronted with a process defect or challenge, it is helpful to refer to experts from your materials or equipment suppliers. IPC and SMTA standards should provide further guidance as well, along with the many excellent courses presented by these industry organizations.
Share on:
Suggested Items
SolderKing’s Successful Approach to Modern Soldering Needs
06/18/2025 | Nolan Johnson, I-Connect007Chris Ward, co-founder of the family-owned SolderKing, discusses his company's rapid growth and recent recognition with the King’s Award for Enterprise. Chris shares how SolderKing has achieved these award-winning levels of service in such a short timeframe. Their secret? Being flexible in a changing market, technical prowess, and strong customer support.
Preventing Surface Prep Defects and Ensuring Reliability
06/10/2025 | Marcy LaRont, PCB007 MagazineIn printed circuit board (PCB) fabrication, surface preparation is a critical process that ensures strong adhesion, reliable plating, and long-term product performance. Without proper surface treatment, manufacturers may encounter defects such as delamination, poor solder mask adhesion, and plating failures. This article examines key surface preparation techniques, common defects resulting from improper processes, and real-world case studies that illustrate best practices.
Breaking Silos with Intelligence: Connectivity of Component-level Data Across the SMT Line
06/09/2025 | Dr. Eyal Weiss, CybordAs the complexity and demands of electronics manufacturing continue to rise, the smart factory is no longer a distant vision; it has become a necessity. While machine connectivity and line-level data integration have gained traction in recent years, one of the most overlooked opportunities lies in the component itself. Specifically, in the data captured just milliseconds before a component is placed onto the PCB, which often goes unexamined and is permanently lost once reflow begins.
BEST Inc. Introduces StikNPeel Rework Stencil for Fast, Simple and Reliable Solder Paste Printing
06/02/2025 | BEST Inc.BEST Inc., a leader in electronic component rework services, training, and products is pleased to introduce StikNPeel™ rework stencils. This innovative product is designed for printing solder paste for placement of gull wing devices such as quad flat packs (QFPs) or bottom terminated components.
See TopLine’s Next Gen Braided Solder Column Technology at SPACE TECH EXPO 2025
05/28/2025 | TopLineAerospace and Defense applications in demanding environments have a solution now in TopLine’s Braided Solder Columns, which can withstand the rigors of deep space cold and cryogenic environments.