Zuken, CSA Catapult Present Results for Optimization of Tools for Design of Power Modules
December 5, 2022 | ZukenEstimated reading time: 1 minute
Zuken, a global leader in the area of software and solutions for electronic and electrical engineering, and Compound Semiconductor Applications (CSA) Catapult are announcing an important milestone in their R&D collaboration aimed at building a development environment for state-of-the-art compound semiconductor products.
CSA Catapult is a UK government-funded non-profit organization headquartered in South Wales that was founded to help the UK become a global leader in compound semiconductors. Working with both large companies and start-ups, CSA Catapult develops and commercializes new semiconductor technology applications.
Collaborating with Zuken on a project to bring a power module layout from a graphical concept to a 3D model, CSA Catapult has identified several requirements and optimizations to Zuken’s CR-8000 Design Force chip, package and PCB co-design software that will provide designers of power electronic products with the ability to co-develop mechanical and electrical design in unison. The integration with industry simulation tools enables the efficient design iteration needed to effectively explore the design envelope for new compound semiconductor products.
As a result of the collaboration, an intuitive function was created to generate interconnections between chips and copper layers in a substrate or a printed circuit board, as well as a function to export a CAD model in a format compatible with FEM software. These advanced features will help designers significantly decrease the time required to generate a 3D model of the power module substrate, chip layout, and chip-to-chip, as well as chip-to-copper interconnections.
Regarding the progress of the R&D collaboration, Dr. Alejandro Villarruel Parra, Senior Power Electronics Engineer at CSA Catapult, said: “The creation of a 3D model of the substrate, chip layout, and chip interconnections is an important part of the early-stage power module design process. Zuken’s advanced design solutions have helped to provide a preview of the module performance, which in turn makes our decision-making process faster when several concepts are being compared or helps to steer the refinement of the module geometry if a concept has already been selected.”
The new capability is included in the 2022 release of CR-8000 Design Force.
Suggested Items
The Chemical Connection: Reducing Etch System Water Usage, Part 2
05/02/2024 | Don Ball -- Column: The Chemical ConnectionIn my last column, I reviewed some relatively simple ways to reduce water usage in existing etch systems: cutting down cooling coil water flow, adding chillers to replace plant water for cooling, lowering flow rate nozzles for rinses, etc. This month, I’ll continue with more ways to control water usage in your etcher. Most of these are not easily retrofittable to existing equipment but should be given serious consideration when new equipment is contemplated. With the right combination of add-ons, it is possible to bring the amount of water used in an etch system to almost zero.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.