Classes and Meetings Under Way at IPC APEX EXPO
January 23, 2023 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 1 minute

IPC APEX EXPO 2023 doesn’t officially kick off until Tuesday, but there’s plenty of action going on here at the San Diego Convention Center.
Booths are sprouting up on the show floor, and exhibitors are starting to arrive. Upstairs, committee meetings have been taking place all weekend; the IPC-J-STD-001 and IPC-A-610 Joint Task Group, and IPC-A-600 and IPC-6012 Joint Task Group meetings, were abuzz with activity.
The members of the 001-610 group boasted 168 people, and they really seemed to enjoy what could have been a boring day looking at standards minutiae. The voting process was something to see, with members waving green cards of approval for changes. It was all very democratic. I heard far more laughter than I had expected. If you’d like to get involved with the standards development process, the committee chairs would welcome your help.
The Professional Development classes began on Sunday, covering everything from design through assembly processes, flex and rigid-flex, and technologies of the future. We interviewed some of the committee members and class attendees, including a few first-time attendees, and we’ll have these interviews published soon.
We’re starting to see groups of engineers walking around the Gaslamp District with their show badges, but the real crowds won’t be here until tomorrow. A few people I spoke with said they think this show marks the return to a pre-pandemic state of mind, and very few people are wearing masks here. With no rain in the forecast, the week is looking good.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
03/28/2025 | Andy Shaughnessy, I-Connect007I’ve spent my week recovering from a busy and interesting week in Anaheim for the 25th IPC APEX EXPO. I think back to my first APEX EXPO, and the changes since then are too numerous to count. I first attended in 2004, also in Anaheim, back when there was almost no design content in the conference or expo portions of the show. It was just a few years after the downturn, and attendees and exhibitors alike were skittish, almost afraid to show confidence in our industry. A few unemployed design friends handed out copies of their resumes. Travel budgets were still down, and the aisles weren’t exactly packed with traffic.
Real Time with... IPC APEX EXPO 2025: Transforming Engineering With Digital Solutions from Zuken
03/27/2025 | Real Time with...IPC APEX EXPOBob Potock discusses Zuken's focus on digital engineering and a move away from traditional document-based processes to model-based designs. This change improves product definition, reduces design errors, and optimizes product parameters. Bob notes that the IPC-2581 standard is crucial for connecting designs, while AI enhances design efficiency.
25 Years of IPC APEX EXPO: Organizer Alicia Balonek Reflects on a Milestone
03/28/2025 | Alicia Balonek, IPCAs I celebrate my 25th work anniversary with IPC, I can’t help but reflect on my incredible journey. From its inception in 2000, IPC APEX EXPO has evolved into one of the most anticipated and dynamic events in the electronics industry, and I’m proud to have been a part of its growth every step of the way.
EIPC Summer Conference 2025: Call for Distinguished Speakers in Edinburgh
03/26/2025 | EIPCThe European Institute of Printed Circuits (EIPC) is pleased to announce its Summer Conference 2025, scheduled for June 3-4 in the historic city of Edinburgh, Scotland.
Real Time with... IPC APEX EXPO 2025: Blackfox—The Future of the Electronics Manufacturing Industry Depends on Training
03/26/2025 | Real Time with...IPC APEX EXPOBlackfox's Levi Gibbon is a newcomer to IPC APEX EXPO, but he has been in electronics manufacturing since 1999. In this interview, he focuses on quality assurance and teaching. He discusses the challenges posed by an aging workforce and the urgent need for new talent as experienced trainers retire.