Trouble in Your Tank: Yield Improvement and Reliability
Dan's Biz Bookshelf: 'The Sale'
The Marketing Minute: Wired for Trust
The Birth of the Printed Circuit Board
May 23, 2023 | Barry Matties and Nolan Johnson, I-Connect007Estimated reading time: 2 minutes
Every industry has a beginning, and we are lucky to have Rex Rozario here to share the story of how the printed circuit board industry got its start. I-Connect007 chatted with Rex recently about how he became involved with circuit board inventor Dr. Paul Eisler.
Barry Matties: Let’s start at the beginning, Rex. My understanding is you were there when circuit boards were first being manufactured.
Rex Rozario: You're correct. Fortunately for me, when I left university, my first job was with a company called The Telegraph Condenser Company; they had just acquired the first license from Paul Eisler. He developed the printed circuit in a shed in London, circa 1940; they were single-sided boards. He had the patents in 1948 and issued five licenses. We (The Telegraph Condenser Company) were the first to get a license.
Eisler later joined Technograph and worked there for some time. Eventually, Technograph and Telegraph merged.
Matties: Would you say you were the first company to produce a licensed printed circuit board?
Rozario: Technically, we were the first company in the UK to manufacture PCBs. Eisler sold one license to the UK and four others to the U.S. We could appoint other people as well, if they wanted to manufacture under our license.
Matties: So, how did you get involved?
Rozario: Whilst studying for my degree at university, I was lucky to obtain a work/study job in my spare time in a development lab with Daly Condensers Ltd. (UK) where I learned all about manufacturing electrical condensers. This gave me the opportunity, after obtaining my university degree, to apply to the UK's largest condenser manufacturer, The Telegraph Condenser Co., which employed me as a development technician. Three weeks into my new job, I took a pre-arranged vacation for two weeks. When I returned, I was met by a senior director and was marched into the office of the managing director who was already addressing five men. The managing director informed us that Telegraph had just obtained the first license in the world from the inventor Dr. Paul Eisler, who was also engaged by Telegraph as a consultant. I was invited to join the five specialists which Telegraph had tapped to form this new team with Dr. Eisler. We were given 5,000 square feet of a surplus building to further develop and introduce printed circuits to replace manual wiring. This period was circa 1953.
In the beginning, we had to shop around for everything, from the base laminate to the copper foil. We did all that within our team, and then suddenly the printed circuit developed in the UK went from a single- to a double-sided board. For the double sided, we used eyelets until through-hole [electroless copper plating] came along.
Matties: You were along for the journey the whole way.
Rozario: I was just lucky to be there.
To read this entire conversation, which appeared in the May 2023 issue of PCB007 Magazine, click here.
Share on:
Suggested Items
RF PCB Design Tips and Tricks
05/08/2025 | Cherie Litson, EPTAC MIT CID/CID+There are many great books, videos, and information online about designing PCBs for RF circuits. A few of my favorite RF sources are Hans Rosenberg, Stephen Chavez, and Rick Hartley, but there are many more. These PCB design engineers have a very good perspective on what it takes to take an RF design from schematic concept to PCB layout.
Trouble in Your Tank: Causes of Plating Voids, Pre-electroless Copper
05/09/2025 | Michael Carano -- Column: Trouble in Your TankIn the business of printed circuit fabrication, yield-reducing and costly defects can easily catch even the most seasoned engineers and production personnel off guard. In this month’s column, I’ll investigate copper plating voids with their genesis in the pre-plating process steps.
Elephantech: For a Greener Tomorrow
04/16/2025 | Marcy LaRont, PCB007 MagazineNobuhiko Okamoto is the global sales and marketing manager for Elephantech Inc., a Japanese startup with a vision to make electronics more sustainable. The company is developing a metal inkjet technology that can print directly on the substrate and then give it a copper thickness by plating. In this interview, he discusses this novel technology's environmental advantages, as well as its potential benefits for the PCB manufacturing and semiconductor packaging segments.
Trouble in Your Tank: Organic Addition Agents in Electrolytic Copper Plating
04/15/2025 | Michael Carano -- Column: Trouble in Your TankThere are numerous factors at play in the science of electroplating or, as most often called, electrolytic plating. One critical element is the use of organic addition agents and their role in copper plating. The function and use of these chemical compounds will be explored in more detail.
IDTechEx Highlights Recyclable Materials for PCBs
04/10/2025 | IDTechExConventional printed circuit board (PCB) manufacturing is wasteful, harmful to the environment and energy intensive. This can be mitigated by the implementation of new recyclable materials and technologies, which have the potential to revolutionize electronics manufacturing.