-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Book Excerpt: The Printed Circuit Designer’s Guide to... Thermal Management with Insulated Metal Substrates, Chapter 2
October 10, 2023 | I-Connect007 Editorial TeamEstimated reading time: 1 minute
Chapter 2: Solder Cracks
Historically, engineering teams using some types of insulated metal substrates in high-performance LED applications have noted the formation of solder cracks after prolonged thermal cycles. Solder cracks, as the name suggests, are discontinuities in the solder joint, usually caused by excessive mechanical stress. This stress typically results from a mismatch between the coefficients of thermal expansion (CTE) of each of the joined components. Through repeated thermal cycling, the tendency of the joined parts to expand and contract at different rates eventually overcomes the solder’s ability to resist that differential displacement. A crack then forms in the solder. Crack formation like this can be aided by soldering defects such as poor wetting at either surface or inclusion of impurities within in the solder.
A solder crack impairs both the mechanical integrity of the joint and the electrical continuity. The mechanical weakness may not be detected, especially if there are several such connections and others are unaffected. The electrical discontinuity may be partial, manifested as increased ohmic resistance if the separated surfaces remain in contact, or may cause an intermittent open circuit. Each can cause defective functioning of the circuit or system.
Figure 2.1 shows possible root causes of such solder cracks. Although this list is not exhaustive, any combination of these effects can contribute towards conditions that cause solder cracks to occur.
As a designer and manufacturer of laminate, Ventec can directly influence multiple aspects relating to materials selection and use, including:
- Minimizing percentage of copper on circuit side
- Use Super HTE (High-Temperature Elongation) copper foil with lower tensile strength
- Lower Tg dielectric working in elastic deformation zone
- Lower CTE of aluminum baseplate (CTE is 19 ppm/K)
- Copper baseplate
- Choosing high-performing dielectric
In addition, the effect each crack or void in the solder joint has on the thermal path of the system must also be considered. A representative approximation is that a crack affecting 50% of the solder pad area will double the thermal impedance.
Suggested Items
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.
AIM Solder Signs Shinil Fl Ltd. as New Distributor for Korea
05/08/2024 | AIM SolderAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce a new distribution partnership with Shinil Fl Ltd., a prominent supplier of technological solutions in the SMT and semiconductor sectors.
Indium Corporation to Showcase HIA Materials at ECTC
05/07/2024 | Indium CorporationAs an industry leader in innovative materials solutions for semiconductor packaging and assembly, Indium Corporation® will feature its advanced products designed to meet the evolving challenges of heterogeneous integration and assembly (HIA) and fine-pitch system-in-package (SiP) applications at the 74th Electronic Components and Technology Conference (ECTC), May 28‒31, in Denver, Colorado.
Indium Corporation Expert to Present on Pb-Free Solder for Die-Attach in Discrete Power Applications
04/30/2024 | Indium CorporationIndium Corporation Product Manager – Semiconductor Dean Payne will present at the Advanced Packaging for Power Electronics conference, hosted by IMAPS, held May 8-9 in Woburn, Massachusetts, USA.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.