The New Chapter: The Benefits of Continuing Education
It’s Only Common Sense: You’ve Got to Hustle
MKS' Atotech: More Horizontal Panel Plating in the U.S.
October 11, 2023 | Christopher R. Daczkowski, MKS' AtotechEstimated reading time: 1 minute
Recently, Schweitzer Engineering Laboratories (SEL) opened its new $100 million captive printed circuit board manufacturing facility in Moscow, Idaho. The new facility features state-of-the-art PCB equipment from MKS’ Atotech, one of the leading providers of advanced PCB and IC substrate horizontal manufacturing equipment for the electronics industry. This type of equipment is normally delivered to Asian markets and is not usually seen in North America.
Equipment selection is a crucial decision for any company and directly impacts the quality and efficiency of production processes. For our customers, several key factors usually drive the decision to install MKS’ Atotech equipment lines. These include our long history as a reputable global solutions provider and proven record of successful installations worldwide. Today, we have delivered and installed more than 2,150 horizontal PCB lines for surface treatment, desmear and metallization, copper electroplating, and final finishing of printed circuit boards and IC substrates, of which more than 1,000 are horizontal copper platers. They are well known for their outstanding repeatability of copper deposition uniformity and pure copper plating results.
With the shift toward increased investment in local manufacturing in the U.S., our system solutions are appreciated as high-quality products to support manufacturing demand now and in the future. With our long history in the Americas, we are happy to see this development and are excited to provide the best possible technical support to our customer base, which is growing, especially with the trend of opening new, innovative PCB plants.
Follow this link to continue reading this article which appears in its entirety in the September 2023 issue of PCB007 Magazine.
Share on:
Suggested Items
Global PCB Connections: Following DFM Rules Leads to Better Boards
12/18/2024 | Jerome Larez -- Column: Global PCB ConnectionsAs a PCB field applications engineer, ensuring smooth communication between PCB designers and fabricators is one of my frequent challenges. A critical part of that dialogue is design for manufacturing (DFM). Many designers, even experienced ones, often misunderstand or overlook important DFM considerations. They may confuse design rules with manufacturing minimums, leading to technically feasible designs that are difficult or costly to produce. In this column, I will clarify some common DFM guidelines and help designers understand the difference between “design rules” and “minimums” while sharing best practices that will simplify the production process and ensure the highest quality PCB.
Sayonara to the Last Standing Copper Foil Plant in North America
12/17/2024 | Marcy LaRont, I-Connect007In July 2021, PCB007 Magazine published an interview with Michael Coll and Chris Stevens of Nippon Denkai about the new acquisition by Nippon Denkai of the last-standing ED foil manufacturer in North America. The plant in Augusta, Georgia, was formerly owned by Oak Mitsui, Inc. and had been purchased by Nippon Denkai the previous March, after which significant investment was made with the expectation of providing more jobs.
SCHMID Group Unveils Enhanced InfinityLine H+ for Electroless Copper Deposition
12/16/2024 | SCHMID GroupThe SCHMID Group, a global leader in high-tech solutions for the electronics industry, proudly announces significant updates to its flagship InfinityLine H+ Electroless Cu system. Specifically designed for the production of high- performance advanced packaging applications using mSAP and SAP processes, the system reflects SCHMID’s expertise in horizontal electroless copper deposition.
OKI Develops PCB Technology with Stepped Copper Coin Insertion to Achieve 55 Times Better Heat Dissipation in Outer Space
12/12/2024 | BUSINESS WIREThe OKI Group printed circuit board (PCB) business company OKI Circuit Technology has successfully developed multilayer PCB technology with stepped copper coin insertion to achieve 55 times better heat dissipation compared to conventional PCB. The stepped copper coin is offered in two types, circular and rectangular, to suit the shape of the electronic component mounted on the PCB. OTC is working to develop mass-production technologies with the aim of introducing PCBs incorporating this new technology into markets for compact devices or devices used in outer space or other environments where air cooling technology cannot be used.
Fresh PCB Concepts: PCB Plating Process Overview
12/12/2024 | Team NCAB -- Column: Fresh PCB ConceptsIn this installment of Fresh PCB Concepts, Mike Marshall takes the helm stating: PCBs have been the platform for the interconnection of electronic components for decades. Because of process costs and other constraints, such as mechanical properties or size limitations of the alternatives, PCBs will remain the standard low-cost interconnection technology. Rapidly increasing performance and functionality requirements of wireless and high-speed devices have challenged the development and implementation of new manufacturing solutions.