The Marketing Minute: Marketing With Layers
The Right Approach: Electro-Tek—A Williams Family Legacy, Part 1
It’s Only Common Sense: If You’re Not Differentiated, You’re Dead
Cirexx International Inc. Chooses atg A9 Flying Probe Technology for High-speed Electrical Test
September 19, 2024 | atg Luther & Maelzer GmbHEstimated reading time: Less than a minute
atg Luther & Maelzer GmbH confirms delivery of high-speed bare board testing technology to PCB fabricator, Cirexx International Inc., in Santa Clara, CA.
Consistent with the on-going investment in leading edge technologies at Cirexx International Inc., the A9 8 head, double-sided, high speed, high accuracy flying probe test system represents the newest addition to Cirexx’s test department. The latest atg technology enables Cirexx to test the most advanced ultra-fine designs while helping to reach industry leading throughput goals.
atg’s A9 can test pad sizes down to 35 micron and is capable of testing products up to a size of 21” x 24”. The A9 eliminates limitations due to test point density or fine-pitch contacts and features embedded component test, 4-wire Kelvin measurement capability with an accuracy of +/- 0,025 mΩ, HPOT and latent testing, all in combination with a test speed of up to 230 measurements/second.
Share on:
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
HT Global Circuits Adds Two atg Luther & Maelzer Flying Probe Test Systems
10/15/2025 | atg Luther & Maelzer GmbHAtg Luther & Maelzer GmbH, a leading supplier of electrical testing solutions for the PCB industry, and IEC USA, a distributor of consumables, equipment, and services in the North American PCB market, confirm the order for high-speed bare board testing technology.
Datest Marches Into SMTA International with Backup Plans, Big Partnerships, and Bigger X-rays
10/06/2025 | DatestDatest, the industry’s favorite second set of eyes (and hands, and solder joints), is heading to SMTA International 2025 at the Donald E. Stephens Convention Center in Rosemont, IL. Find us at Booth #2627, where high-reliability, high-complexity builds meet their match.
Discover TRI's AI Ecosystem at productronica 2025
09/25/2025 | TRITest Research, Inc. (TRI), the leading test and inspection systems provider for the electronics manufacturing industry, is excited to announce its participation at productronica 2025, which will be held at Messe München Center from November 18 to 21, 2025.
TTCI Wins 2025 Mexico Technology Award for Test Services
09/22/2025 | TTCIThe Test Connection Inc. (TTCI), a trusted provider of electronic test and manufacturing solutions for more than 45 years, is honored to receive the 2025 Mexico Technology Award in the Test Services category.
TTCI Returns to SMTAI with Focus on Functional Test, ICT, and Training Excellence
09/22/2025 | TTCIThe Test Connection Inc. (TTCI), a trusted provider of electronic test and manufacturing solutions for more than 45 years, will exhibit in Booth 2403 at SMTA International 2025, taking place October 19–23 at the Donald E. Stephens Convention Center in Rosemont, Illinois. TTCI will spotlight its advanced test capabilities and full-service approach to tackling complex product validation challenges.