Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
Nolan’s Notes: Soldering Technologies
Assembly with Solder - An Unblinking Look at
July 30, 2014 | Joe Fjelstad, Verdant ElectronicsEstimated reading time: 1 minute
Solder is unquestionably highly practical technology for joining metals, and carries with it a long history. Its roots go back more than 2,000 years. Somewhere in the distant past, one of our more clever and observant ancestors chanced to create an alloy of tin and lead that melted at a low temperature. They or someone who learned of their discovery found that that this unique combination of elements could be used to join pieces of metal together. This combination of chance observation and applied imagination has proven a key development in the technological history of mankind. Those in the electronics industry of today are very familiar with this ancient technology and today it is still the method of choice for making electronic assemblies of every sort. The only fly in the ointment is that the EU parliament, in a mad rush to try to look “green,” took the emotional and scientifically ill-advised position that lead needed to be banned from electronic solders.
Sadly, there was never presented a credible piece of scientific evidence that any user had ever been harmed by tin-lead solder in electronic equipment. Nor could they prove their assertion that it would be a risk to ground water. That said, it is true that greed and complete mismanagement of electronic waste boarding on criminal behavior, has resulted in physical illness and environmental harm in areas of the world where uncontrolled recycling was being carried out by uneducated individuals. While all is not yet well in that regard, that “hole” in the system is being addressed by businesses, NGOs, and governments around the world.
Not to be forgotten is the fact that the impact of the EU’s decision has been significant and far-reaching and it has caused the industry to spend needlessly many tens of billions of dollars diverting the considerable talents of countless talented engineers and scientists around the world to make products that are unfortunately proving less reliable and arguably less environmentally friendly electronics than those built with tin lead solders.
Read the full column here.
Editor's Note: This column originally appeared in the July 2014 issue of SMT Magazine.
Share on:
Suggested Items
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.
SolderKing Celebrates a Year of Expansion, Innovation, and Sustainability Achievements
12/09/2024 | SolderKing Assembly Materials Ltd,SolderKing Assembly Materials Ltd, a leading UK-based manufacturer of soldering materials and consumables, has wrapped up 2024 with a series of milestones that reflect its ongoing growth and commitment to innovation.