Learning With Leo: UHDI—The Next Leap in PCB Manufacturing
Nolan’s Notes: Is Mexico the Pulse of Electronics in the Americas?
Standard of Excellence: Speed vs. Quality in Customer Service
How to Select an Automatic Pick-and-Place Machine
April 15, 2015 | Robert Voigt, DDM NovastarEstimated reading time: 2 minutes
This is the third in a series of articles designed to help buyers analyze and select SMT equipment for PCB assembly, and examines automatic pick-and-place machines, the most complex component in a circuit assembly operation. Because of this complexity, the next few columns will address different functions in this process.
Automatic pick-and-place machines are much more common than manual or semiautomatic machines, but they also have the greatest range of capabilities and cost. This column will focus on features and capabilities and include some cautions regarding reliability of low-cost machines, including:
• Production volume ranges (CPH)
• Accuracy and repeatability specs
• Pick-up and centering methods
In future columns, I will address size, machine accuracy, encoders, feeders and mechanical positioning methods.
When starting your evaluation process, there are two defining factors to keep in mind, which determine what category fits your machine needs. The No. 1 principal factor is components per hour (CPH), and the secondary factor is machine capability.
Production Volume
As in the previous column, it’s constructive to start by addressing production ranges for various types of machines, since this is the No. 1 factor in your evaluation process. For purposes of comparison, since all circuit boards vary in size and complexity, we talk about volumes in terms of components per hour, or CPH. The following table offers a general guideline of machine categories defined by their CPH.
Machine Capabilities
This is the second defining factor in helping choose the correct auto pick-and-place machine for your needs. Here, we will only be talking about two aspects of machine capability: accuracy and repeatability, and pick-and-place centering methods.
Accuracy and Repeatability
For production machines, we typically recommend looking for a machine with accuracy of +/- .0001” and down to fine pitch capability of 12 mil on a repeated basis. Less expensive machines often don’t meet this spec. Most low-cost machines will also not come standard with a computer or software which could help with the repeatability aspects if not the accuracy. While some may offer enhanced technology, most do not.
Pick-and-place Centering Methods
There are four methods for pick-up and placement:
1. No centering mechanism
2. Mechanical (jaws)
3. Laser centering
4. Vision centering
Method 1: No centering mechanism other than relying on the component’s pick-up point for placement. In other words, the part is not physically centered after being picked up by the tool head, and if it’s picked off-center on the tool, it will be off-center when placed on the board. Obviously, this is not a very accurate placement method because there is no definable tolerance. You can expect to find this method used by hobbyists or instructors, but certainly not in any type of precision production environment. There are not many options available either, and long-term reliability is questionable.
• Pros: Low cost
• Cons: Low accuracy, repeatability and long-term reliability, no options, or spare parts
• Size range: No definable tolerances
Editor's Note: This article originally appeared in the March issue of SMT Magazine.
Share on:
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
Mexico's Moment in Electronics Manufacturing
11/12/2025 | Lorena Villanueva, Global Electronics Association MexicoOn a weekday morning in the Bajío, Mexico, a training lab reviews accept/reject criteria before a line changeover. By mid-afternoon, a cross-border shipment clears in El Paso that left Ciudad Juárez at dawn. Farther south, a university team finalizes intake for a new electronics pathway blending online modules with factory practicums. These scenes—routine yet transformative—explain whyMexico is becoming the most strategic partner for the United States to ensure a resilient, innovative, and sovereign electronics supply chain in North America.
Real Time with... SMTAI 2025: SPEA Bridges the Gap Between Legacy and Next-Generation Test Solutions
11/10/2025 | Real Time with...SMTAIEstablished in Italy in 1976, SPEA designs and manufactures automatic test equipment for various industries, including automotive, aerospace and defense, medical, consumer electronics, and energy. Recognized as one of Italy’s top-performing companies, SPEA continues to innovate in test automation technology. At SMTAI 2025, Dustin Warren, vice president of sales for SPEA America, discussed how the company is bridging the gap between older in-circuit test (ICT) systems and newer, more advanced testing solutions.
Defense Speak Interpreted: The Autonomous Plane Battle—Skyborg Vs. Loyal Wingman
10/07/2025 | Dennis Fritz -- Column: Defense Speak InterpretedI’m awaiting the updates for the U.S. Air Force's Skyborg and Loyal Wingman airborne driverless vehicles. As the hype of self-driving cars has given way to more mundane autonomous activities, so too has the hype of uncrewed planes given way to reality. In cars, the SAE International association classifies degrees of autonomy from 0 to 5, as do some defense aerospace applications of unmanned flight, which have been reduced to practice, while others remain under development.
Schweizer Ends Staff Restructuring Measures and Short-Time Working at the Schramberg Site
10/01/2025 | Schweizer Electronic AGSchweizer Electronic AG has implemented comprehensive measures to adjust its cost and personnel structure at its Schramberg site due to strong market fluctuations in the automotive and industrial electronics sector. Thanks to the successful restructuring, short-time working can now be ended with immediate effect. A stable order situation is expected for the fourth quarter, with signs of growth momentum returning in 2026.
Global Sourcing Spotlight: Finding the Balance Between Cost and Quality
09/24/2025 | Bob Duke -- Column: Global Sourcing SpotlightIn global sourcing, pursuing lower costs often takes center stage. It’s the shiny lure that gets buyers to cast their lines into unfamiliar waters. But seasoned professionals know that in the long run, sourcing is less about price tags and more about value. The real magic—and margin—lies in finding the balance between cost and quality.