Dan's Biz Bookshelf: 'Move Your Bus'
Driving Innovation: Direct Imaging vs. Conventional Exposure
It’s Only Common Sense: Selling to Today's Generation of Buyers
Design Considerations: Flexible Circuit vs. Traditional PCB
May 7, 2015 | John Talbot, Tramonto CircuitsEstimated reading time: 1 minute
Recent global printed circuit market research reveals that flexible circuits still only account for about 13–15% of the overall printed circuit market (PCB 76.2B in 2015 vs. flex 12.7B in 2015). PCBs have been in existence since the 1960s and nearly anybody who designs printed circuits first designs a rigid printed circuit board. There are many experienced PCB designers working confidently all around the world.
They understand the manufacturing capabilities and limitations very well as they have been designing these inherent components of the electronics industry for decades.
Flexible circuits, on the other hand, tend to be a little intimidating and mysterious to traditional PCB designers. Suddenly engineers in the development group are coming to their designers with questions about flexible circuits and these otherwise very experienced men and women find themselves without answers to questions they could answer in their sleep if they pertained to a traditional PCB.
It’s understandable that there are still questions about flexible circuit design vs. traditional PCB design based on the number of PCBs vs. flexible circuits manufactured worldwide, annually. However those of us in the flexible circuit fabrication market are often asked even the simplest of questions: what kind of software do I need to design a flexible circuit?
What kind of files must I submit for quotation/fabrication of a flexible circuit? These are questions that arise from the lack of experience in flexible circuit design. Below we will address some of the common concerns we hear from PCB designers and help to clarify some of the unknowns and show that the vast experience gained as PCB designers carries over to the flexible circuit design as well.
To read the full article, click here.
Editor's Note: This article originally appeared in the April 2015 issue of The PCB Magazine.
Share on:
Suggested Items
DownStream Acquisition Fits Siemens’ ‘Left-Shift’ Model
06/26/2025 | Andy Shaughnessy, I-Connect007I recently spoke to DownStream Technologies founder Joe Clark about the company’s acquisition by Siemens. We were later joined by A.J. Incorvaia, Siemens’ senior VP of electronic board systems. Joe discussed how he, Rick Almeida, and Ken Tepper launched the company in the months after 9/11 and how the acquisition came about. A.J. provides some background on the acquisition and explains why the companies’ tools are complementary.
Elementary Mr. Watson: Retro Routers vs. Modern Boards—The Silent Struggle on Your Screen
06/26/2025 | John Watson -- Column: Elementary, Mr. WatsonThere's a story about a young woman preparing a holiday ham. Before putting it in the pan, she cuts off the ends. When asked why, she shrugs and says, "That's how my mom always did it." She asks her mother, who gives the same answer. Eventually, the question reaches Grandma, who laughs and says, "Oh, I only cut the ends off because my pan was too small." This story is a powerful analogy for how many PCB designers approach routing today.
Connect the Dots: The Future of PCB Design and Manufacturing
07/02/2025 | Matt Stevenson -- Column: Connect the DotsFor some time, I have been discussing the increasing complexity of PCBs and how designers can address the constantly evolving design requirements associated with them. My book, "The Printed Circuit Designer’s Guide to… Designing for Reality," details best practices for creating manufacturable boards in a modern production environment.
Siemens Turbocharges Semiconductor and PCB Design Portfolio with Generative and Agentic AI
06/24/2025 | SiemensAt the 2025 Design Automation Conference, Siemens Digital Industries Software today unveiled its AI-enhanced toolset for the EDA design flow.
Cadence AI Autorouter May Transform the Landscape
06/19/2025 | Andy Shaughnessy, Design007 MagazinePatrick Davis, product management director with Cadence Design Systems, discusses advancements in autorouting technology, including AI. He emphasizes a holistic approach that enhances placement and power distribution before routing. He points out that younger engineers seem more likely to embrace autorouting, while the veteran designers are still wary of giving up too much control. Will AI help autorouters finally gain industry-wide acceptance?