Researcher Develops Cheaper, Better LED Technology
August 28, 2015 | Florida State UniversityEstimated reading time: 2 minutes
A Florida State University engineering professor has developed a new highly efficient and low cost light emitting diode that could help spur more widespread adoption of the technology.
"It can potentially revolutionize lighting technology," said Assistant Professor of Industrial and Manufacturing Engineering Zhibin Yu. "In general, the cost of LED lighting has been a big concern thus far. Energy savings have not balanced out high costs. This could change that."
Yu developed this new LED technology using a combination of organic and inorganic materials. The material, which dissolve and can be applied like paint, shines a blue, green or red light and can be used to make a light bulb.
But what makes it really special is that it's far simpler to manufacture than existing products on the market.
Most LED materials require engineers to put four or five layers of material on top of each other to create the desired product or effect. Yu's material only requires one layer.
"In the future, to do manufacturing, it's a big challenge if you have to deal with multiple layers," he said.
His research has resulted in an award by the National Science Foundation to further investigate the essential materials and establish the processing platform for the development of intrinsically stretchable, active-matrix organic LED displays.
The discovery was reported in the journal Advanced Materials.
The research is crucial to the development of LED technology, which is fast becoming an avenue to reduce the country's electric consumption. LED lighting is already sold in stores, but widespread adoption has been slow because of the costs associated with the material and the quality.
But, LED lights do save energy.
According to the U.S. Department of Energy, residential LED lighting uses at least 75 percent less energy than regular incandescent lighting.
Yu came to FSU by way of the Energy and Materials Strategic Faculty Hiring Initiative. He is a researcher at the FSU's High-Performance Materials Institute (HPMI), a multidisciplinary research institute dedicated to the research and development of advanced materials and manufacturing technologies.
"HPMI has really benefitted from Dr. Yu's diligent work, as well as the other top researchers who have joined FSU as part of the Energy and Materials Strategic Hiring Initiative," said Richard Liang, director of the High-Performance Materials Institute.
Other authors on the journal article published in Advanced Materials were FSU post doctoral researcher Junqiang Li and graduate students Sri Ganesh Bade and Xin Shan.
Suggested Items
ZESTRON Academy Launches 2024 Advanced Packaging & Power Electronics Webinar Series
05/01/2024 | ZESTRONZESTRON, the leading global provider of high-precision cleaning products, services, and training solutions in the electronics manufacturing and semiconductor industries, proudly announces the launch of its highly anticipated webinar series on Advanced Packaging & Power Electronics, a webinar series on the latest innovations, cleaning, and corrosion challenges.
NextFlex Convenes the Hybrid Electronics Community at Binghamton University
05/01/2024 | NextFlexBinghamton University hosted the NextFlex hybrid electronics community on April 18 for a day of expert presentations, breakout sessions on technology and manufacturing topics, and networking.
HQ NextPCB of HQ Electronics Debut on the International Stage for Electronics Manufacture at IPC APEX 2024
05/01/2024 | PRNewswireHQ NextPCB of HQ Electronics, a leading Chinese-based multilayer PCB manufacturer and assembly house showcased its industrial prowess on the international stage for the first time at the IPC APEX Expo 2024.
All-Inclusive: PRIDE Industries Helps Employees With Disabilities to Succeed
05/01/2024 | Sandy Gentry, IPCPRIDE Industries is the leading employer of people with disabilities and those with other barriers to employment in the United States, including veterans and former foster youth. The company offers job training, placement, on-the-job coaching, and skills development for independent living. It has held IPC membership since 2000. Read more about this unique business and its connection to the electronics manufacturing industry.
U.S. Companies Invest Heavily in Robots
04/30/2024 | IFRManufacturing companies in the United States have invested heavily in more automation: total installations of industrial robots rose by 12% and reached 44,303 units in 2023. Number one adopter is the car industry followed by the electrical and electronics sector.