The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
Material Considerations for Advanced Driver Assistance Systems Assembly
September 11, 2015 | Steve Brown, AlphaEstimated reading time: 3 minutes
For many years, the expanding scope of electronic systems in vehicles has been built on a very conservative design ethos, with a considerable focus on reliability. It is well known that automotive electronics was, by far, the largest electronics market segment to be exempted from 2006’s EU RoHS legislation, which included the removal of lead (Pb) from electronic assemblies.
The core argument during the successful lobbying of the EU, and subsequent exemption for the automotive electronics companies, was that there was insufficient reliability data of the Pb-free alternatives. Now these exemptions are coming to an end, and this growing segment is rapidly employing the most common alloy group which the majority of other segments had adopted before 2006. This solder alloy group is the standard Tin-Silver-Copper alloys, based close to the ternary eutectic point at Sn Ag3.8 Cu0.7.
Added complexity in material selection comes from the ever-increasing array of applications in automotive electronics, and one of the newer applications is the deployment of an array of vision and detection systems for driver assistance, collectively known as advanced driver assistance systems (ADAS).
The Evolution of Vision and Detection Systems
Parking sensors have become commonplace in the last 10 years, making the process of getting your car into a tight parking space a much less risky proposition. This is based on relatively simple radar technology and provides the driver with an increasingly audible alarm as the object to be avoided comes closer.
In more recent years, a number of vision and detection systems have started to play a much more critical role in the driving experience. One of these examples is lane departure warning system (LDWS). This system uses AOI vision technology to track the edge of the road or the lane markings, and provides the driver with a warning if the vehicle veers over the line without indicating.
The system interprets the absence of purposeful use of the indicators as a likely result of the driver losing concentration, or in its extreme form, falling asleep. The first generation of LDWS activated a significant vibration alert in the seat in order to alert the driver to imminent danger. The second generation took things closer to automatic intervention with a low-torque nudge of the steering wheel to put the vehicle back "on-course". The reliability of such a system is clearly more critical than the simple parking sensors, as the operation is designed to work at speed and prevent high-speed collision.
An increasingly common feature in vehicles is cruise control. This has been available for decades and like many features which enter the market on luxury vehicles, has become standard for any vehicles intended for distance driving. The new generation of cruise control is emerging, and is known as "active cruise control".
This technology not only regulates the speed, but also maintains a minimum distance between the vehicle in front, automatically reducing the throttle, and in some cases activating the brakes automatically, and then only returning to the set-speed when the distance to the vehicle in front allows. This radar based technology is integrated with the braking and throttle controls to achieve its function, and so its performance is absolutely critical to safety.
The fourth and final area we will consider is the new generation of parking aids. Supplementing the radar-based parking sensors is the integration of rear-view cameras with superimposed guidance lines to help the driver with reversing into a parking space. This passive parking technology is already being advanced with some active systems which will actually assess a parking space and automatically steer the vehicle into a parking space requiring the driver to only operate the throttle and the brake pedals. This technology uses a combination of radar and cameras to provide this advanced parking function.
Editor's Note: This article originally appeared in the September 2015 issue of SMT Magazine.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.