Graphene Microphone Outperforms Traditional Nickel and Offers Ultrasonic Reach
November 27, 2015 | Institute of PhysicsEstimated reading time: 1 minute
Scientists have developed a graphene based microphone nearly 32 times more sensitive than microphones of standard nickel-based construction.
The researchers, based at the University of Belgrade, Serbia, created a vibrating membrane - the part of a condenser microphone which converts the sound to a current - from graphene, and were able to show up to 15 dB higher sensitivity compared to a commercial microphone, at frequencies up to 11 kHz.
The results are published today, 27th November 2015, in the journal 2D Materials.
"We wanted to show that graphene, although a relatively new material, has potential for real world applications" explains Marko Spasenovic, an author of the paper. "Given its light weight, high mechanical strength and flexibility, graphene just begs to be used as an acoustic membrane material."
The graphene membrane, approximately 60 layers thick, was grown on a nickel foil using chemical vapour deposition, to ensure consistent quality across all the samples.
During membrane production, the nickel foil was etched away and the graphene membrane placed in the same housing as a commercial microphone for comparison. This showed a 15 dB higher sensitivity than the commercial microphone.
The researchers also simulated a 300-layer thick graphene membrane, which shows potential for performance far into the ultrasonic part of the spectrum.
"The microphone performed as well as we hoped it would" adds Spasenovic. "A thicker graphene membrane theoretically could be stretched further, enabling ultrasonic performance, but sadly we're just not quite there yet experimentally."
"At this stage there are several obstacles to making cheap graphene, so our microphone should be considered more a proof of concept" concludes Spasenovic. "The industry is working hard to improve graphene production - eventually this should mean we have better microphones at lower cost."
Suggested Items
Real Time with… IPC APEX EXPO 2024: Exploring the Future of Surface Finishes
04/25/2024 | Real Time with...IPC APEX EXPOJoe McGurran, product marketing director for MKS Atotech, looks into the future of surface finishes, discussing less nickel, reduced thickness, technologies influencing HDI and UHDI, and the benefits of nickel-free surface finishes. He also touches on popular finishes like ENIG and palladium immersion gold and discusses the value proposition of making a change.
Reassessing Surface Finish Performance for Next-gen Technology, Part 2
03/04/2024 | Frank Xu, PhD and Martin Bunce of MacDermid Alpha, and John Coonrod of Rogers Corp.The introduction of 5G/6G has created a growing demand for faster rates of data transfer and operation at higher frequencies, pushing signals to travel toward the outer edges of conductors. As a result, the surface finish applied over the copper circuitry is now gaining more attention.
Orbitronics at Keio University: Transforming the Horizon of Next Generation Electronics
12/18/2023 | PRNewswireTraditional electronics relies on manipulating electrons through their charge, but a groundbreaking initiative led by scientists at Keio University is propelling us towards a new era in electronics.
American Standard Circuits Now Offers ENEPIG Surface Finish
09/18/2023 | American Standard CircuitsIllinois-based PCB fabricator, American Standard Circuits, is now offering in-house ENEPIG surface finish. ENEPIG is the solution to multiple surface finish requirements within one multi metal plating operation.
MKS Launches Atotech CMA Closed-Loop System
07/28/2023 | MKS Instruments, Inc.MKS Instruments announced the release of the Atotech CMA Closed-Loop System for alkaline zinc nickel plating. Certified by TÜV Rheinland, this technology enables virtually wastewater-free operations while minimizing waste generation and reducing carbon footprint.