Star Wars-style Robotic Hand Controlled by Muscle Vibrations
December 4, 2015 | Imperial College LondonEstimated reading time: 3 minutes
Scientists have developed technology that enables a user to control a robotic hand via arm movements and muscle vibrations.
Some robotic prosthetics currently in development are connected to the user via a socket, which seals around the stump, and detects electrical signals from muscle movements. One challenge with this technology is maintaining an electrical connection to the muscle via sensors placed on the skin inside the socket. For example, this connection can be lost because of sweat, which can inhibit the prosthetic hand’s ability to function. Fabricating and calibrating the system for a user is also quite expensive.
The researchers from Imperial College London have developed a prototype sensor system that avoids this pitfall by detecting mechanical signals, instead of electrical signals, from tiny vibrations produced by muscle fibres as they move when muscles flex. These vibrations can be sensed and passed to a robot hand to make it move in response to the user’s muscles like their own hand.
The technology also has a motion sensor system to detect arm movements. This enables a user to control how the robotic hand grasps different sized objects, through a simple sequence of muscle flexes and arm movements.
The research was carried out by Dr Ravi Vaidyanathan and Samuel Wilson, a research postgraduate, who are both from the Department of Mechanical Engineering at Imperial College London. It builds on the work of Dr Richard Woodward, a former student of Dr Vaidyanathan’s, who was a Dyson Foundation scholar at the College.
The team caution that they have not yet carried out patient clinical trials with the technology. They still have a number of refinements to complete before the sensor and motion tracking system can be commercialised. However, the researchers believe their work is a step forward in making robotic prosthetics more robust in their design, which could widen their usefulness for patients.
Dr Vaidyanathan said: “Put your ear against your bicep and use your hand to form a seal between it and your arm. Now flex your arm and you should be able to hear your muscles rumbling and gurgling. We have developed a sensor technology that sits on your arm to detect these rumbles and another device that detects arm motions. This technology takes us a step closer to providing prosthetics that are potentially more robust, accessible and easier for patients to use in the future.”
The team have carried out a preliminary demonstration of the system with Alex Lewis who lost both legs, his right arm and use of the other arm following a rare infection.
Page 1 of 2
Suggested Items
KIC’s Miles Moreau to Present Profiling Basics and Best Practices at SMTA Wisconsin Chapter PCBA Profile Workshop
01/25/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, announces that Miles Moreau, General Manager, will be a featured speaker at the SMTA Wisconsin Chapter In-Person PCBA Profile Workshop.
The Drive Toward UHDI and Substrates
09/20/2023 | I-Connect007 Editorial TeamPanasonic’s Darren Hitchcock spoke with the I-Connect007 Editorial Team on the complexities of moving toward ultra HDI manufacturing. As we learn in this conversation, the number of shifting constraints relative to traditional PCB fabrication is quite large and can sometimes conflict with each other.
Standard Of Excellence: The Products of the Future
09/19/2023 | Anaya Vardya -- Column: Standard of ExcellenceIn my last column, I discussed cutting-edge innovations in printed circuit board technology, focusing on innovative trends in ultra HDI, embedded passives and components, green PCBs, and advanced substrate materials. This month, I’m following up with the products these new PCB technologies are destined for. Why do we need all these new technologies?
Experience ViTrox's State-of-the-Art Offerings at SMTA Guadalajara 2023 Presented by Sales Channel Partner—SMTo Engineering
09/18/2023 | ViTroxViTrox, which aims to be the world’s most trusted technology company, is excited to announce that our trusted Sales Channel Partner (SCP) in Mexico, SMTo Engineering, S.A. de C.V., will be participating in SMTA Guadalajara Expo & Tech Forum. They will be exhibiting in Booth #911 from the 25th to the 26th of October 2023, at the Expo Guadalajara in Jalisco, Mexico.
Intel Unveils Industry-Leading Glass Substrates to Meet Demand for More Powerful Compute
09/18/2023 | IntelIntel announced one of the industry’s first glass substrates for next-generation advanced packaging, planned for the latter part of this decade.