Global DRAM Revenue Down 9.1% in 4Q15
February 15, 2016 | TrendForceEstimated reading time: 3 minutes
The global DRAM industry posted US$10.27 billion in revenue for the fourth quarter of 2015, representing a 9.1% drop from the prior quarter, according to DRAMeXchange, a division of TrendForce. The revenue decline was attributed to the falling DRAM average selling prices and the persistent market oversupply.
DRAMeXchange Research Director Avril Wu said: “In the fourth quarter, notebook shipments were stronger than expected and Apple’s iPhone 6s shipments continued to sustain the market demand. At the same time, however, the DRAM suppliers were also in the midst of migrating their process technology. SK Hynix had just begun manufacturing on the 21nm process and Micron ramped up its 20nm production. Thus, DRAM price decline was unavoidable.”
Samsung remained as the No. 1 DRAM supplier by revenue while SK Hynix widened its lead over Micron
Samsung continued to top the DRAM revenue ranking. Although the memory maker’s fourth-quarter revenue fell by 9.7% compared with the prior quarter to US$4.76 billion, it still retained a large market share of 46.4%. SK Hynix’s revenue also fell by 9.3% quarterly to US$2.87 billion, bringing its market share to 27.9%. Micron suffered the greatest hit with a 10.5% quarterly decrease in revenue and controlled only 18.9% of the market. The gap between Micron and SK Hynix has widened as the U.S. manufacturer has fallen behind in technology.
As for operating margins, the South Korean suppliers both experienced a slight drop in the fourth quarter of last year – Samsung to 43% and SK Hynix to 32%. Micron saw a more significant decline in its operating margin, from 14.8% in the third quarter to 8.5% in the fourth quarter. Wu expects Micron to have difficulty staying profitable in the second quarter of 2016 if DRAM prices stayed in their downtrend.
Major suppliers continue with their technology migration; SK Hynix leads in newly added capacity
In the technology race, the share of the 20nm manufacturing in Samsung’s total DRAM production continues to climb, with the yield rate also being higher than those of its competitors. Samsung therefore has the lowest manufacturing cost among the major suppliers, and the company plans to begin production on the 18nm process in the middle of 2016 to reduce costs further.
SK Hynix, on the other hand, began manufacturing on the 21nm process in the fourth quarter of 2015 and will be able to steadily increase its overall DRAM capacity in this year’s first quarter. Additionally, SK Hynix’s M14 fab is now in operation, so the company is now the DRAM maker with the largest increase in new capacity.
As for Micron, it increased the 20nm production in the fourth quarter of 2015, but the yield rate has yet to improve. The U.S.-based supplier plans to begin 16nm manufacturing in the first half of 2016. With respect to the 16nm migration, Micron is also behind the South Korean memory makers. Hence, Micron will not be able to reduce its costs significantly as initially expected.
Nanya continues to increase its 30nm-die shrink production and has slightly raised its capacity. Though the prices of specialty memory products have fallen recently, Nanya’s fourth-quarter revenue fell only by 1.8%.
Winbond’s fourth-quarter revenue increased by 2.4% as the supplier benefited from the growth of its automotive electronic business and the satisfactory market demand for industrial memory products. Winbond plans to climb out of its technology rut and begin manufacturing on the 3X nm process in 2017.
As for Powerchip, the company reallocated capacity to the 25nm PC DRAM production as to maintain it capacity utilization rate after a drop in LCD driver orders. Hence, Powerchip saw a substantial 10.6% quarterly increase in its DRAM revenue for the fourth quarter of 2015. Currently, Powerchip is also doing small batch runs on its 25nm process to reduce costs.
Suggested Items
NEOTech Positions Itself as Microelectronics Industry Leader with High-Technology Investments
05/09/2024 | NEOTechNEOTech, a leading provider of electronic manufacturing services (EMS), design engineering, and supply chain solutions in the high-tech industrial, medical device, and aerospace/defense markets, announces a significant investment in acquiring new Palomar 8100 wire bonder machines, enhancing the company’s positioning as a leader of cutting-edge microelectronics assemblies for mission-critical applications.
MKS’ Atotech, ESI to Participate in CPCA Show
05/09/2024 | MKS’ AtotechMKS’ Atotech, and ESI will participate in the CPCA Show 2024. The show will be held from May 13 to 15, 2024, at the National Exhibition and Convention Center (Shanghai) and will bring together domestic and international manufacturers in the electronic circuit industry.
Dragonfly Energy Announces Breakthrough in Lithium Battery Production: Eliminating Harmful 'Forever Chemicals'
05/09/2024 | Globe NewswireDragonfly Energy Holdings Corp., an industry leader in green energy storage, has made a significant breakthrough in battery manufacturing with the successful production of PFAS-free electrodes in lithium battery cells.
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.
All Flex Solutions Hires Mike Madetzke as Manager of R&D
05/08/2024 | All Flex SolutionsAll Flex Solutions is very pleased to announce that Mike Madetzke has joined their team as their new Manager of Research and Development.