Record Efficiency with Tandem Solar Cells
March 4, 2016 | TU EindhovenEstimated reading time: 1 minute
On Thursday Alice Furlan receives her PhD for her study in which she experimented with stacking different types of material layers in flexible, thin solar cells. By combining these with a thin layer of silicon into a ‘tandem solar cell’ she, along with researchers from TU Delft, achieved a record level of efficiency in this kind of hybrid solar cell.
Flexible, plastic solar cells are an attractive alternative to the current standard crystalline silicon solar cells (with their characteristic gray-blue color). Using organic materials makes for easier and cheaper production while the printable, bendable character means they can be used in a wide variety of situations. The problem, however, is the yield.
Plastic combination
In her PhD thesis, Alice Furlan, PhD student in the Molecular Materials and Nanosystems group of professor René Janssen at the Department of Chemical Engineering, tested how you can best combine two or three different layers of semi-conductive plastic. Given that each type of plastic absorbs a different color light, the idea is that by combining these, you can utilize a larger portion of the incoming sunlight. Furlan also looked at the electrical connections between the different layers, where losses tend to be greatest.
Marriage
She hit the jackpot of her research together with colleagues from TU Delft, combining the Eindhoven plastic cells with thin layers of amorphous silicon to a ‘tandem solar cell’. This ‘marriage’ of two different kinds of absorption material – silicon and plastic – led to an efficiency of 13.2%. Never before had such cells generated such a high yield. The findings have been published in the journal Advanced Materials.
Combining strengths
Where the plastic used is mainly a strong absorber of infrared light, the silicon converts light from the visible and ultraviolet spectrum. In this way the method combines the aforementioned advantages of plastics with the broad absorption property of silicon. For the science researchers themselves there was also a kind of ‘marriage’: two disciplines (plastic and silicon solar cells) joining forces where they would normally have worked fully independently of each other.
Curriculum Vitae
Alice Furlan (1987, Italy) studied Materials Engineering at the University of Trieste in Italy. As an Erasmus student she was able to study for a year at TU Delft and follow an internship at the Molecular Materials and Nanosystems group of prof.dr.ir. René Janssen at TU Eindhoven. In 2012 she began her PhD in this group.
Suggested Items
Breaking High-speed Material Constraints: Design007 Magazine — May 2024
05/14/2024 | I-Connect007 Editorial TeamDo you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems instead of high-speed materials, saving time and money while streamlining the fab process. In the May 2024 issue of Design007 Magazine, our contributors explain how to avoid overconstraining your materials when working with high-speed boards.
Indium Experts to Present at Electronics in Harsh Environments SMTA Conference
05/13/2024 | Indium Corporationndium Corporation Technical Manager for Europe, Africa, and the Middle East, Karthik Vijay, will deliver a technical presentation and Indium Corporation Senior Technologist, Dr. Ronald Lasky, will deliver both a workshop and technical presentation at the Electronics in Harsh Environments SMTA Conference on May 14-16 in Copenhagen, Denmark.
Ansys’ Collaboration with Schrödinger will Accelerate Materials Development with Unprecedented Multiscale Simulation
05/09/2024 | ANSYSAnsys and Schrödinger are collaborating to deliver an ICME approach that bridges the gap between materials discovery and product development.
2024 Apple iPad Pro Estimated to Ship Between 4.5 to 5 Million Units
05/08/2024 | TrendForceApple’s recent product launch in May introduced a lineup of new tablets featuring advanced AMOLED screens. Notably, the Pro version boasts a dual-layer tandem structure designed to address the longstanding challenges of screen burn-in and lifespan that are common with AMOLED displays.
AIM Solder Signs Shinil Fl Ltd. as New Distributor for Korea
05/08/2024 | AIM SolderAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce a new distribution partnership with Shinil Fl Ltd., a prominent supplier of technological solutions in the SMT and semiconductor sectors.