Hybrid Pixel Array Detectors Enter the Low-noise Regime
March 31, 2016 | International Union of CrystallographyEstimated reading time: 1 minute
The detector group at the Swiss Light Source at PSI has been one of the pioneers in the development of custom-made hybrid pixel array detectors (HPADs) for synchrotron applications.
For decades, detectors have been a limiting factor in experiments at synchrotron radiation facilities. Even though imaging detectors evolved over time, the evolution of the source always outran the evolution of the detector. This situation started to change with the introduction of the so-called hybrid pixel array detectors, which contain a pixelated readout chip custom-designed for a well-defined experiment or technique. One of the revolutionising advantages offered by this technology is that every single pixel contains all necessary electronics, including for instance counters, for X-ray detection. This massive parallelisation increased the overall efficiency of the detector by several orders of magnitude as compared with the charge-coupled-device-based system. There are now various examples of HPADs, specifically developed for X-ray experiments at storage-ring synchrotron sources, as well as various spin-off companies commercialising them. Most of these systems are so-called photon-counting detectors, where each incoming photon is processed by the readout electronics in the pixel and individually counted. The advantage of photon counting is that electronic noise, present in any system, can be efficiently discriminated against, yielding `noise-free' detectors. An application for such low-noise systems is in energy-dispersive measurements. The researchers show in their paper that, with the use of a proper mask to shield the edge regions between pixels, very good fluorescence spectra can be obtained. This capability was subsequently used for multi-colour imaging at the SOLEIL synchrotron.
The innovative aspect of the work contained in this paper does not lie in the spectroscopic results obtained as they could very well have been obtained with other detectors. But what is truly impressive is that these results were obtained with an HPAD using a standard planar diode array as sensor. This means that the system uses relatively standard and thus easy-to-manufacture components, making it possible to envision building larger and/or further-optimised systems in the near future. And with that, low-noise HPADs have entered a field formally reserved for silicon drift detectors and complementary metal-oxide semiconductor imagers.
Suggested Items
Terran Orbital Joins the Mobile Satellite Services Association (MSSA)
05/16/2024 | BUSINESS WIRETerran Orbital Corporation, a global leader in satellite-based solutions primarily serving the aerospace and defense industries, announced its membership in the Mobile Satellite Services Association (MSSA).
Raytheon-Kongsberg System is Proving Itself – In Demos and In Combat
05/16/2024 | Raytheon TechnologiesOn a rocky island off the coast of Norway, Michael Sadlowski watched as a surface-to-air missile launcher pointed up into a dark nighttime sky.
Un-Jammable Quantum Tech Takes Flight to Boost UK’s Resilience Against Hostile Actors
05/13/2024 | BUSINESS WIREOSI Systems Receives Order for $9 Million to Provide Cargo and Vehicle Inspection Systems
05/13/2024 | BUSINESS WIREOSI Systems, Inc. announced that its Security division received an order from an international customer for approximately $9 million to provide the Company’s Eagle® M60 high energy mobile cargo and vehicle inspection systems including related service and support.
MBDA: Successful Qualification Firing of GRIFO System with CAMM-ER Missile
05/13/2024 | MBDAMBDA has recently performed a successful qualification firing of the GRIFO system, the Italian Army’s new generation air defence system, a member of the EMADS (Enhanced Modular Air Defence Solutions) family developed by MBDA, based on the CAMM-ER (Common Anti-Air Modular Missile – Extended Range) missile.