Silver Nanowires Are an Ideal Material for Current and Future Flexible Touch-screen Technologies
May 16, 2016 | University of SurreyEstimated reading time: 2 minutes
Research published in the journals Materials Today Communications and Scientific Reports has described how silver nanowires are proving to be the ideal material for flexible, touch-screen technologies while also exploring how the material can be manipulated to tune its performance for other applications. Currently, touch screen devices mainly rely on electrodes made from indium tin oxide (ITO), a material that is expensive to source, expensive to process and very brittle.
A team from the University of Surrey, led by Professor Alan Dalton and in collaboration with M-SOLV Ltd, a touch-sensor manufacturer based in Oxford, looked to alternative materials to overcome the challenges of ITO, which is suffering from supply uncertainty. Alternative materials investigated as ITO replacements have included graphene, carbon nanotubes and random metal nanowire films. This study showed how silver nanowire films have emerged as the strongest competitor, due to transmittances and conductivities which can match and readily exceed those of ITO. This is a material that consists of wires which are over a thousand times thinner than a human hair, that form an interconnected conductive network.
Showcasing a new process
Matthew Large, the first author on the research published in Scientific Reports described the importance of these latest results. “Our research hasn’t just identified silver nanowires as a viable replacement touchscreen material, but has gone one step further in showing how a process called ‘ultrasonication’ can allow us to tailor performance capabilities. By applying high frequency sound energy to the material we can manipulate how long the nanosized ‘rods’ of silver are. This allows us to tune how transparent or how conductive our films are, which is vital for optimising these materials for future technologies like flexible solar cells and roll-able electronic displays.”
In a paper published last month in Materials Today Communications, the same team, showed how silver nanowires can be processed using the same laser ablation technique commonly used to manufacture ITO devices. Using this technique, the team produced a fully operating five inch multi-touch sensor, identical to those typically used in smartphone technology. They found it performed comparably to one based on ITO but used significantly less energy to produce.
“Not only does this flexible material perform very well, we have shown that it is a viable alternative to ITO in practical devices,” concluded Professor Dalton. “The fact we are able to produce devices using similar methods as currently in use, but in a less energy-intensive way is an exciting step towards flexible gadgets that do not just open the door for new applications, but do so in a much greener way.”
An easy to deploy alternative
Maria Cann, a technologist from M-SOLV and first author on the Materials Today Communications paper added ““We are seeing a lot of interest from our customers in silver nanowire films as an ITO replacement in devices. This work is a really important step in establishing exactly which sensor designs can make good nanowire products. The fact that the nanowire films are processed by the same laser techniques as ITO makes the transition from ITO to nanowires really straightforward. It won’t be long before we are all using nanowires in our electronic devices. ”
The team, now based at the University of Sussex is now looking to develop the scalability of the process to make it more industrially viable. One limiting factor is the current cost of silver nanowires. Funded by Innovate UK and EPSRC, the team are collaborating with M-SOLV and a graphene supplier Thomas Swan to use a nanowire and graphene combination in the electrodes to markedly reduce the cost.
Suggested Items
The Shaughnessy Report: Unlock Your High-speed Material Constraints
05/15/2024 | Andy Shaughnessy -- Column: The Shaughnessy ReportThe world of PCB materials used to be a fairly simple one. It was divided into two groups: the “traditional” laminates, often called FR-4, and the high-speed laminates developed especially for high-speed PCBs. These were two worlds that usually didn’t collide. But then traditional laminates started getting better, and high-speed designers and design engineers took notice and started to reconsider what FR-4 could be used for.
Breaking High-speed Material Constraints: Design007 Magazine — May 2024
05/14/2024 | I-Connect007 Editorial TeamDo you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems instead of high-speed materials, saving time and money while streamlining the fab process. In the May 2024 issue of Design007 Magazine, our contributors explain how to avoid overconstraining your materials when working with high-speed boards.
Indium Experts to Present at Electronics in Harsh Environments SMTA Conference
05/13/2024 | Indium Corporationndium Corporation Technical Manager for Europe, Africa, and the Middle East, Karthik Vijay, will deliver a technical presentation and Indium Corporation Senior Technologist, Dr. Ronald Lasky, will deliver both a workshop and technical presentation at the Electronics in Harsh Environments SMTA Conference on May 14-16 in Copenhagen, Denmark.
Ansys’ Collaboration with Schrödinger will Accelerate Materials Development with Unprecedented Multiscale Simulation
05/09/2024 | ANSYSAnsys and Schrödinger are collaborating to deliver an ICME approach that bridges the gap between materials discovery and product development.
2024 Apple iPad Pro Estimated to Ship Between 4.5 to 5 Million Units
05/08/2024 | TrendForceApple’s recent product launch in May introduced a lineup of new tablets featuring advanced AMOLED screens. Notably, the Pro version boasts a dual-layer tandem structure designed to address the longstanding challenges of screen burn-in and lifespan that are common with AMOLED displays.