Gentle Strength for Robots
May 18, 2016 | MAX-PLANCK-GESELLSCHAFTEstimated reading time: 3 minutes
In interacting with humans, robots must first and foremost be safe. If a household robot, for example, encounters a human, it should not continue its movements regardless, but rather give way in case of doubt. Researchers at the Max Planck Institute for Intelligent Systems in Stuttgart are now presenting a motion system - a so-called elastic actuator - that is compliant and can be integrated in robots thanks to its space-saving design. The actuator works with hyperelastic membranes that surround air-filled chambers. The volume of the chambers can be controlled by means of an electric field at the membrane. To date, elastic actuators that exert a force by stretching air-filled chambers have always required connection to pumps and compressors to work. A soft actuator such as the one developed by the Stuttgart-based team means that such bulky payloads or tethers may now be superfluous.
Many robots have become indispensable, and it is accepted that they may be dangerous to humans in their workspace. In the automotive industry, for example, they assemble cars with speed and reliability, but are well shielded from direct contact with humans. These robots go through their motions precisely and relentlessly, and anyone who gets in the way could be seriously injured. Robots with soft actuators that cannot harm humans, on the other hand, are tethered by pneumatic hoses and so their radius of motion is restricted. This may be about to change. "We have developed an actuator that makes large changes in form possible without an external supply of compressed air", says Metin Sitti, Director at the Max Planck Institute for Intelligent Systems.
The new device consists of a dielectric elastomer actuator (DEA): a membrane made of hyperelastic material like a latex balloon, with flexible (or 'compliant') electrodes attached to each side. The stretching of the membrane is regulated by means of an electric field between the electrodes, as the electrodes attract each other and squeeze the membrane when voltage is applied. By attaching multiple such membranes, the place of deformation can be shifted controllably in the system.
Air is displaced between two chambers
The researchers are helped in this by the fact that their membrane material knows two stable states. In other words, it can have two different volume configurations at a given pressure without the need to minimize the larger volume. This is a little like letting the air out of an inflated balloon; it does not shrink back to its original size, but remains significantly larger. Thanks to this bi-stable state, the researchers are able to move air between a more highly inflated chamber and a less inflated one. They do this by applying an electric current to the membrane of the smaller chamber which responds by stretching and sucking air out of the other bubble. When the power supply is switched off the membrane contracts, but not to its original volume; it remains larger, corresponding to its stretched state.
"It is important to find suitable hyperelastic polymers that will enable strong and fast deformation and be durable," points out Metin Sitti. With this in mind, the team has tested different membrane materials and also used models to systematically record the behaviour of the elastomer in the actuator.
Thus far, the elastomers tested by Sitti's team have each had a mix of advantages and disadvantages. Some show strong deformation, but at a slow rate. Others work fast, but their deformation is more limited. "We will combine different materials with a view to combining different properties in a single membrane," says Sitti. This is, however, just one of the next steps he and his team have in mind. They also plan to integrate their actuator in a robot so that it can, for instance, move its legs but still give way if it happens to come across a human. Only then can machine-human interactions be risk-free.
Suggested Items
GPV's Handover of Refurbished Factory Building
05/07/2024 | GPVOn 6 May 2024, Bjorn Fiskers, MD at GPV Electronics TH in Thailand and his team were handed the keys to our refurbished factory building, adding another 7,000 sqm to our current 15,000 sqm electronics factory. Our electronics factory in Thailand will comprise of a total of 22,000 sqm.
Siemens Delivers New Solido IP Validation Suite
05/07/2024 | SiemensSiemens Digital Industries Software introduced Solido™ IP Validation Suite software, a comprehensive, automated signoff solution for quality assurance across all design intellectual property (IP) types, including standard cells, memories and IP blocks.
Real Time with… IPC APEX EXPO 2024: Outlining Rehm's Innovations and Global Presence
05/01/2024 | Real Time with...IPC APEX EXPOMichael Hanke, the chief sales officer for Rehm Thermal Systems, shares insights on the North American market, new machinery, and software development. He also discusses Rehm's turnkey solutions, process flexibility, global presence, and the dedicated team of 700 employees working on global solutions.
QinetiQ Achieves UK’s First Jet-to-Jet Teaming Between Aircraft and Autonomous Drone
04/29/2024 | QinetiQQinetiQ has successfully trialled the UK’s first Crewed-Uncrewed-Teaming demonstration between a crewed aircraft and an autonomous jet drone.
Technica USA Presents Inaugural Supplier Alliance Award at IPC APEX EXPO 2024
04/24/2024 | Technica USADuring IPC APEX EXPO 2024, Technica USA took the opportunity to thank all of their supply partners that made the effort to join them for the exhibition in their booth, as well to all of our SMT partners that had their own booths, with the latest in automation and process technology.